Skip to Content

How long does it take to get a toilet replaced?

The amount of time it takes to replace a toilet will depend on several factors, such as the difficulty of the installation, the size and type of the toilet, the availability of parts, and the expertise of the plumber.

Generally speaking, it typically takes between 3 to 5 hours to replace a standard toilet. If the toilet is connected to a waste pipe, additional work may be required, which could extend the time it takes.

Additionally, depending on the plumber, the existing plumbing may need to be replaced, which also can take time. If a tankless toilet is being installed, more time will be needed to install the necessary parts and components.

What is a fair price for replacing a toilet?

The cost for replacing a toilet typically depends on the type of toilet being replaced, the cost of materials and labor needed, and any additional fixtures or plumbing materials needed. Generally speaking, the cost of replacing a standard toilet ranges from $200 to $400, including parts, labor, and installation.

However, the cost of higher-end toilets or intricate bathroom layouts could cost more. If additional plumbing work or fixtures are needed, the installation costs could increase significantly. To get a more precise estimate of the cost of replacing a toilet, consider consulting a certified plumber or bathroom installation company.

How much does Home Depot charge for installing a toilet?

The cost of installing a toilet from Home Depot depends on the type of toilet being installed, parts needed and complexity of the project, as well as the area in which the installation is being completed.

Depending on the above factors, Home Depot will typically charge anywhere from $200 to $800+ for installing a toilet. This price can be broken down into the cost of labor, along with the cost of any necessary parts.

Additionally, if the installation requires additional piping, material and/or other accessories, that will also be an additional cost. Home Depot offers an installation services agreement, which covers the labor and any related costs associated with the project.

This fee can be discussed and agreed upon in store and typically covers any complications that might arise during the installation.

How hard is it to remove and replace a toilet?

Removing and replacing a toilet is not an overly difficult task. However, it does require some basic plumbing knowledge and skill in order to be done properly. The exact steps required to remove and replace a toilet will depend on what type of toilet you have, so it’s important to consult the toilet’s instructions before attempting the job.

In general, the first step in removing a toilet is to turn off the water supply and flush the toilet. Then, you will need to unscrew the bolts holding the toilet to the floor and lift it away. You will also need to disconnect the supply line.

At this point, you’ll be ready to install the new toilet.

In order to install the new toilet, the first step is to make sure that the area around the toilet is clear of debris and the flange is accessible. Then, you will need to place the wax ring around the outlet opening of the toilet, fit the toilet onto the bolts, and securely attach it to the floor.

Ensure that the toilet is level as you do this. After that, you can reconnect the supply line and turn on the water supply. Once the toilet is efficiently connected and filled, you can test it out to make sure it is working properly and all connections are secure.

Removing and replacing a toilet is a fairly straightforward process, but it does require some basic plumbing knowledge. If you do not feel comfortable attempting this job yourself, it is best to consult a professional plumber for help.

Is replacing a toilet worth it?

Whether or not it is worth it to replace a toilet will depend on the specific toilet and its age. If the toilet is still relatively new, it likely won’t need to be replaced yet. On the other hand, if the toilet is old and some of the components, such as the flush handle, gaskets, or seal, are not working properly, then it is probably best to replace the entire toilet.

Replacing a toilet can be expensive, but if the right components and tools are used, it can be a relatively easy task and can be done in a relatively short amount of time. Additionally, you can save money since a new toilet is likely to be more efficient than an old one.

Overall, replacing a toilet will likely be worth it in the long run, as it can save you time, money and trouble from having to constantly fix a toilet that is old or not functioning properly.

Is it worth it to replace old toilet?

Yes, replacing an old toilet is worth it for a variety of reasons. Firstly, newer toilets are more water-efficient compared to older models, so they can help reduce your water bill and water usage around the home.

Newer models also come with a range of features, such as taller bowls with more comfortable seating, better flushing systems and quiet-close lids. Additionally, you’ll be helping the environment by reducing the amount of water wasted with older, less efficient models.

A new toilet can also help to enhance the overall look and style of your bathroom, making it a worthwhile investment for any homeowner.

What do I need to know before replacing my toilet?

Before replacing your toilet, it is important to understand the basic tools and materials you need to have and the steps you will need to take.

First, you need to have the right tools to complete the job. This includes a screwdriver, adjustable wrench, various sizes of slip-joint pliers, a small sledgehammer and chisel, an old rag, and possibly a shim.

You may also need extra items to complete the install, such as a flange set and sealant.

Once you have the tools and materials ready, you should turn off the water supply to the toilet. This can usually be done by locating the shutoff valve behind the toilet near the wall. Once the water is off, you should flush the toilet to ensure there is not any water in the tank or bowl.

Next, you will need to remove the toilet. This can be done by loosening the two nuts that secure the base of the toilet to the floor. This will allow you to remove the entire toilet.

When removing the old toilet, make sure not to damage the flange or the old wax ring, as these will be needed to install a new toilet. You should also take this time to inspect the toilet flange to see if it needs to be replaced.

Once the old toilet is removed, you will need to clean the mounting surface and install a new wax ring and bolt caps. Once the wax ring is in place, you can carefully place the new toilet on top of it.

Make sure to line up the bolts on the base of the toilet to the bolt holes on the flange.

Once the toilet is in place, you will need to secure it in place with the two nuts at the base. Tighten the nuts until they are snug, but be careful not to over tighten them. Once the toilet is secured in place, you should connect the water supply line.

Finally, you will need to turn the water back on and test the toilet. If it is flushing correctly and filling up properly, the job is complete! If there are any issues, you may need to double check your work and potentially make adjustments until it is working correctly.

Can one person lift a toilet?

Yes, one person can lift a toilet. However, it is not recommended because a toilet is usually quite heavy, ranging from 35-60 lbs. If you attempt to lift the toilet without help, you may end up straining yourself, especially when it comes to carrying the toilet from one place to another.

It is best to ask for help when lifting a toilet so that it can be done safely. Additionally, reaching behind the toilet to remove any wax-rings or connecting plumbing may require two people as it can be a difficult manoeuvre.

Can a beginner replace a toilet?

Yes, a beginner can replace a toilet but it is important to know the steps that are involved and have the necessary tools to do the job. Replacing a toilet is a relatively simple process, but it is important to make sure that you understand the steps you need to take and that you have the right tools before attempting this task.

To replace a toilet, you will need to remove the existing toilet, take accurate measurements, select and purchase a new toilet, install the floor bolts, connect the new toilet to the water supply, seal any gaps between the toilet and the floor, and verify that all connections are securely fastened.

Furthermore, it is important to make sure that you follow the manufacturer’s instructions carefully and to double-check all connections before using the new toilet.

What is involved in installing a new toilet?

Installing a new toilet requires several steps. First, the old toilet must be removed. This requires turning off the water, using a plunger to push out any remaining water and detaching the water supply line.

Once that is done, the old toilet can be disconnected and lifted out of the bathroom.

The next step is to install the new toilet, beginning by securing the floor bolts and installing the wax ring underneath the toilet. Then the new toilet’s water supply line should be connected and mounted to the wall.

The toilet can then be placed on the bolts and rocked into a secure position.

Next, the toilet seat and lid should be installed and the long bolts that connect them can be tightened. Finally, the tank should be attached to the bowl and the fill valve should be attached and adjusted.

Water can then be turned back on, and the new toilet will be fully installed.

What’s the labor cost to remove a toilet?

The labor cost to remove a toilet will depend on several factors, including the number of toilets being removed, the difficulty of the job, and the local labor rates. As a general rule of thumb, the labor cost to remove a single toilet should fall between $45-$150 per hour.

This range can increase if additional tools and/or equipment are necessary. For example, if an old wax seal has to be broken, a plumber may need to use a specialized tool to do so, which could add to the cost of labor.

Additionally, if the toilet is being replaced with a new one, there may be an additional cost to cover the installation of the new toilet. It is best to contact a qualified plumbing contractor to get an accurate estimate of the labor cost to remove a toilet.

Is removing a toilet easy?

Removing a toilet can be relatively easy if you know what you are doing. First, you will need to shut off the water valves that provide water to the toilet. To do this, locate the water shut-off valves, which should be located below the toilet.

Once you have this done, flush the toilet to clear out any water that may be in the tank. Then, remove the tank lid and use a wrench to remove the water supply line. With the water supply line disconnected, the remainder of the toilet should be easy to remove.

Make sure to wear gloves while you do this as some parts of the toilet may be crusty or contaminated. Once you have the bowl and tank removed, to ensure that the removal goes quickly and easily, you will want to check for any other objects that may be attached.

This might include a wax ring, a mounting ring, or other hardware. If these need to be removed, do it at this time, as it is better to deal with them now than having to do it later. Finally, you might want to cover the drain opening with a rag to prevent debris from falling down the drain and causing a mess.

A little bit of extra effort and care will make the removal process much easier and safer.

Do plumbers remove toilets?

Yes, plumbers can remove toilets. The process for removing a toilet will vary depending on the model, how it is attached to the floor, and what type of replacement is being installed. In most cases, the process will involve turning off the water supply, draining the tank and bowl, then unscrewing and disconnecting the old toilet from the bolts at the floor.

After the toilet is detached from the floor, the plumber will then remove it from the bathroom. If a new toilet is being installed, the plumber will need to make sure the flange that supports the toilet is clean and level, and then will securely attach the new toilet to the flange and connect the water supply.

Do you need planning permission to remove a toilet?

Whether or not you need planning permission to remove a toilet depends on a number of factors. Generally, minor interior renovations such as the removal of a toilet are considered to be permitted development and do not require planning permission.

However, if the renovations are part of a larger project, such as an extension, then you may need to get planning permission. Other factors, such as the age of the building, may also come into play, so it is a good idea to check your local authority’s planning rules.

It is usually best to consult with a qualified building surveyor or planning consultant before undertaking any structural work, as there may be additional restrictions that need to be considered.

Do you have to remove toilet to install flooring?

In some cases, it may be necessary to remove the toilet in order to install the new flooring. This can depend on the type of flooring you are installing, the size of the bathroom, and the ease of access.

In many cases, it’s often easier to remove the toilet and set it aside before laying the flooring, as it can provide better access to compact areas. If your toilet is attached to the floor with caulk, you will also need to remove it.

On the other hand, if the flooring you’re installing is vinyl planks or vinyl sheeting, it’s generally possible to install the new floor around the toilet. In this case, you’ll need to measure the distance between the walls and the toilet, add the thickness of the vinyl, and cut that piece of the flooring to size.

It may be possible to fit a quarter-round around the toilet in order to cover any gaps between the floor and the toilet later on.

If you’re ever unsure about whether or not it’s necessary to remove the toilet in order to install new flooring, it’s best to consult an experienced floor expert to get an accurate assessment. They will be able to suggest the best plan of action in a timely and cost-effective way.