Skip to Content

How much does a new RV toilet cost?

The cost of a new RV toilet will vary depending on the type, size, and features you are looking for. Prices typically start around $150 and can go up to $1000 or more. If you are looking for a more efficient toilet to save water, you will likely pay more, while basic models tend to be less expensive.

The size of the toilet can also have an impact on price. The larger the toilet, the more you can expect to pay. There are also different styles available, such as porcelain, plastic, and even composting, so you may need to factor in additional fees for installation or other fees.

Additionally, if you are buying from an RV dealer, you might find discounts or additional services that could save you money in the long run.

How much does it cost to replace RV toilet?

The cost of replacing an RV toilet can vary significantly based on factors like the location and type of toilet you’re replacing. In general, a new RV toilet can range from $75-$400, with the average being around $200.

Installation fees and additional supplies can also add up to the overall cost. The location of the RV toilet and whether you are replacing or upgrading the existing toilet will also be factors to consider.

Labor fees could range from a few hundred dollars to a thousand or more, based on the complexity of the project. Additional supplies, such as seals, gaskets, mounting screws, etc. , could also range from $25-$100, depending on the type and size of the toilet you are looking to install.

Can you replace the toilet in an RV?

Yes, it is possible to replace the toilet in an RV. Depending on the type of toilet you want to replace, there may be additional steps you need to take, such as ensuring the water in the compartment is turned off and disconnecting the old toilet and flushing system.

Once the old toilet is removed, you can install the new toilet in its place, making sure all of the hoses and connections are secure. Once everything is connected and secured, you can turn the water back on and give the new toilet a test flush.

Make sure to check for any leaks and that the flushing and filling system are working correctly before you declare the job finished.

What type of toilet is for RV?

RVs typically have cassette toilets. A cassette toilet is a type of blackwater system that stores waste in an easily removable cassette or container. Unlike some blackwater systems, it requires a frequent cleaning to remove waste and odors.

Cassette toilets reuse some of the waste water with a flush/drain process. The waste is transferred via an attached hose to an external portable tank, where the waste can be emptied and the portable tank washed.

These toilets are typically more compact than other toilet systems, making them ideal for RV use. Additionally, they are often easier to install and don’t require electrical connections.

Can a beginner replace a toilet?

Yes, a beginner can replace a toilet, although it is recommended for them to do their research and be properly prepared before taking on the job. The process isn’t as intimidating as it may sound and can be done in a few steps with the help of some common tools.

First, the water supply to the toilet should be shut off. Next, the mounting bolts should be removed and the toilet lifted off the floor. The old wax ring and closet bolts should then be removed and the floor cleaned with a wire brush or scraper.

After that, the new wax ring should be put in place and the new toilet set carefully on top of it. Once the toilet is seated, the closet bolts should be fastened securely and the rear mounting bolts put in place.

Finally, the water supply should be reconnected and the toilet can be tested for proper operation. Although it may seem like a daunting task, a beginner can successfully complete toilet replacement with some preparation and guidance.

How do you upgrade an RV bathroom?

Upgrading an RV bathroom can be an exciting way to make your RV more comfortable and functional. Depending on the type of RV that you have, the upgrades that you choose, and the size of your budget, upgrading your RV bathroom can be an easy and relatively inexpensive project.

One of the best ways to upgrade an RV bathroom is to replace the toilet. Modern toilets are designed with features to reduce water use and save space, making them ideal for RV bathrooms. Additionally, you can replace your old toilet with a better-looking model if you want a more stylish look.

Replacing the fixtures and faucets is another great way to upgrade an RV bathroom. Fixtures and faucets come in a variety of styles, sizes, and finishes, allowing you to customize the look of your bathroom.

Also, swapping out the old fixtures for modern, more efficient ones can help you save water and energy.

Finally, you can give your RV bathroom a facelift by painting or wallpapering the walls and adding new accessories such as towel bars, shelves, and organizers. Also, depending on the size of your bathroom, consider installing a new medicine cabinet, replacing the old shower enclosure, or adding a luxurious spa tub or hot tub.

Upgrading an RV bathroom may seem like a daunting task, but with proper planning and budgeting, it can be a fun and rewarding experience. Don’t forget to research your options and check with a professional if you’re unsure about any aspect of the project.

Good luck and happy RVing!.

Should you keep water in RV toilet?

It is not recommended to keep water in the RV toilet due to possible bacterial build-up and the possibility of clogging. It is best to use the RV toilet only when necessary and to flush it with fresh water each time.

It is important to remember that RV toilets can become clogged easily, so only use them when absolutely necessary and be sure to follow the manufacturer’s instructions. Some RV owners choose to fill their tank with water only long enough to flush the toilet and dump the contents before filling it again.

This helps to prevent bacteria build-up and clogs as it is not sitting in the tank. If using an RV toilet for longer periods, it is important to regularly treat the tank with a biocide or bleach to help prevent the growth of bacteria.

Additionally, it is recommended to flush the tank with fresh water several times a year to help keep it clean.

Does an RV toilet need a vent?

Yes, an RV toilet must have a vent. This is because the waste must be disposed of properly and safely. Without a vent, the air and waste products would be stagnant inside the unit and odors will begin to build up.

A vent allows air and gases to escape out of the toilet, reducing any odors and the risk of any blockages. Vents also help with the breakdown of waste material and keeps the toilet running more efficiently.

It is important to make sure the vent is properly installed and maintained in order for it to work correctly.

Does putting a brick in the toilet tank save water each time you flush?

Yes, putting a brick in the toilet tank can help to save water each time you flush. The brick helps reduce the amount of water used per flush, as the brick takes up space and displaces water in the tank.

This means that the total volume of water in the tank is less and thus allows for a smaller volume of water to be used for each flush. In other words, a brick in the tank provides a smaller flush of water, saving water with each use.

However, it should be noted that the amount of water that can be saved varies from toilet to toilet, and therefore is not an exact science. Additionally, the effectiveness of the brick can be compromised if the tank is not properly sealed, as water can simply pass around it.

On the other hand, it can be a good option for those looking for an easy and DIY way to save water.

How long do RV toilets last?

The longevity of RV toilets can vary greatly depending on the type of toilet and how it’s used and maintained. The most important contributors to a long lasting toilet are frequent cleaning and proper maintenance.

A well-maintained RV toilet can last up to 10 years or more with regular care and attention.

RV toilets are typically either a permanent system that’s installed directly into the vehicle or a portable option. Permanent systems usually last longer since they’re professionally installed and can be serviced more easily if needed.

Portable systems can last anywhere from a season or a few years depending on the material, build and how it’s taken care of.

Properly maintaining your RV toilet is essential for making it last as long as possible. The waste holding tank should be emptied and rinsed regularly to reduce odors and build up. It’s also important to inspect the seals and gaskets for cracks, leaks and other damage often to ensure they’re in good condition.

If they need to be replaced, it should be done promptly to prevent potential issues. Regular toilet cleaner can also help prevent septic build up and reduce odors.

By following these simple steps and practicing proper maintenance, you can ensure that your RV toilet will last for many years to come.

Can I use vinegar to clean my RV toilet?

Yes, you can certainly use vinegar to clean your RV toilet. Vinegar is a natural, inexpensive, and effective cleaner that can be used to thoroughly clean the entire RV toilet. You should start by pouring vinegar directly onto the toilet bowl and using a toilet brush to scrub it all around.

Allow the vinegar to sit for several minutes before flushing the toilet. For stubborn stains, you may need to repeat the process several times. Additionally, you can spray a solution of water and vinegar directly onto the outside of the toilet to remove rust and dirt.

Finally, you can use a damp cloth to wipe down the lid, seat, and other exterior surfaces of the toilet.

How to replace toilet in RV trailer?

Replacing a toilet in an RV Trailer is a moderately difficult task, but by following the correct steps, it can be done successfully. Below is a guide on how to remove and replace the toilet in an RV trailer:

1. Shut off the water supply to the RV – Before beginning the job, find the shut-off valves which can usually be found under the sink in the RV. Turn the valves off and make sure to fully close the valves.

This will stop all water supply to the RV.

2. Drain the water from the toilet tank – Find the knob for the tank’s drain valve and open it. All the water should completely drain before the tank can be removed.

3. Disconnect the tank from the bowl – Unscrew the bolts that hold the tank onto the toilet bowl as well as the bolts which attach the bowl to the floor. After the bolts are removed, tilt the tank up and off it’s gasket.

This should disconnect the tank from the bowl.

4. Unbolt the old toilet – After the tank has been removed, the bowl can then be lifted off the floor. Once it is lifted off, unscrew the bolts which attach the bowl to the floor. This will take out the old toilet.

5. Place the New Toilet in the Bowl – Place the new toilet into the bowl and use new bolts to secure it. Take caution not to over-tighten the bolts as this could crack the bowl.

6. Reconnect the Tank to the Bowl – Une the new gasket that comes with the tank and use a rubber cement (that is specified for toilet installation) for the gasket to stick to the bowl. Make sure that the tank is completely level and secure the bolts.

7. Turn the water supply back on – After the new toilet has been installed, turn the water supply back on. Fill the tank with water and let the entire toilet completely fill. Flush the toilet a few times to check for any leaks or any issues with the toilet’s flush.

By following these steps, you can successfully replace a toilet in an RV trailer.

Is RV plumbing the same as house plumbing?

No, RV plumbing is not the same as house plumbing. While the overall purpose is the same, the plumbing in an RV is designed to operate in a much more compact space and withstand more movement than residential plumbing.

RV plumbing usually consists primarily of plastic pipes since plastic is lightweight and does not corrode. RV water systems also need to be periodically winterized to protect against freezing. Additionally, RV plumbing installations often include a water pump, which pressurizes the system in order to ensure that the limited amount of water storage is used efficiently and can reach high locations, such as showers.

Finally, some of the fixtures found in RVs are specifically designed for RV use and may not be compatible with house plumbing.

What is a standard RV toilet?

A standard RV toilet is a compact toilet found in recreational vehicles (RVs), travel trailers, and van conversions. These toilets are designed to provide a convenient and sanitation solution while on the go.

Unlike standard residential toilets, RV toilets are usually small and use very little water compared to traditional toilets. Most RV toilets also possess a flush-valve system and some models may be used with a foot pedal to make flushing easier.

These toilets are commonly constructed from sturdy plastic or porcelain materials for durability and are relatively easy to clean. Because of their small size and minimalist design, RV toilets can often be retrofitted into many areas that lack plumbing.

Additionally, most RV toilets are compliant with standard camping regulations, making them the preferred solution for many RVers.

Are RV toilets regular?

RV toilets are typically regular in size, but can come in both standard and elongated depths. Depending on the type of RV you have—whether it’s a trailer, fifth wheel, truck camper, or motorhome—the type of toilet you can use varies.

If you’re looking for a standard size RV toilet, you may find toilets from a variety of brands in the market, such as Dometic, Sealand, Thetford, or any number of RV OEMs. They typically come with either a round front or an elongated bowl, and the latter provides a bit more space.

For a fifth wheel or a motorhome, you’ll find larger, elongated bowl toilets that are designed for maximum comfort and efficiency. The larger size also makes them a better match for the interiors of these RV types.

The main difference between an RV toilet and a regular toilet is the flushing system. Most RV toilets use a foot pedal or hand flush, while regular toilets have a tank-style flush. However, some RV toilets now come with more conventional flushing systems.

The type of flushing mechanism affects the installation process, so make sure you understand what you’re getting before you buy.

Overall, RV toilets are mainly regular in size and type, but they are manufactured to suit the size and layout of most RV types. The best way to find the right toilet for your RV is to measure the space and look for a model that will fit correctly.