Skip to Content

How much does a tub surround cost?

The price of a tub surround can vary depending on the size, material, and design of the surround. A basic plastic tub surround can range from $150 to $400 and can be installed with minimal tools and effort.

If you want something more aesthetically pleasing, then you can choose a tile, stone, or wood option which will cost much more. Prefabricated tub surrounds that snap into place with included caulk and sealer can cost from $400 to $1000.

For even higher quality surrounds, you can expect to pay anywhere from $1500 to $3000. Customized surrounds with added features like shelving, benches, and other detailing can cost $6000 or more. The best way to get an accurate price on a tub surround is to compare quotes from contractors and suppliers in your area.

What is the average cost to install bathtub surround?

The average cost to install a bathtub surround is approximately $800 to $2,000, depending on the type of surround selected and the complexity of the installation. The walls surrounding a bathtub typically consist of tile, acrylic, fiberglass, or a combination of acrylic and tile.

The materials alone will run around $300-$1000. If a contractor is hired, labor could range from $400 to $1300, depending on how complex the installation is. If you plan to do the job yourself, you should factor in the time and cost for any additional materials such as backer board, caulking, grout and silicone.

Additionally, you should plan to invest in the necessary tools and make sure you have the proper experience in installing the bathtub surround.

Can you put a tub surround over existing tub?

Yes, you can put a tub surround over an existing tub. To do this you need to measure your tub’s dimensions and then purchase a tub surround that will fit over it. Make sure to do your research when selecting the material and design of the tub surround to make sure it is suitable for your needs and existing decor.

Once you have the tub surround, you should clean and dry the existing tub to ensure a good adhesive bond. Then, apply the adhesive as per the instructions, and begin to put the surround in place, making sure to seal around any areas (such as plumbing fixtures) as you go.

Allow the adhesive to cure before using the tub and be sure to check with a bathroom professional along the way if you have any questions.

Can a plumber install tub surround?

Yes, a plumber can install a tub surround. It is an important part of any bathroom renovation process because not only does it add an aesthetic element to the bathroom, but it also provides a solid barrier between the tub and the wall, preventing any eventual water damage.

A plumber is the best person for the job of installing a tub surround because they are the ones best equipped with the know-how and necessary tools to do the job. It includes measuring, cutting, and installing the surround.

This requires a keen eye for detail and precision. Additionally, plumbers also understand the importance of sealing the wall to ensure no water leakage through the surround. Proper installation of the tub surround also requires a good knowledge of the pipes, valves and other components that go into the bathroom to make sure the system is secure and airtight.

This is a job best left to a professional.

Is it cheaper to use a tub surround or tile?

The cost of a tub surround or tile will vary depending on the size, material, and labor costs associated with each option. For a typical 5 foot by 8 foot tub surround, with a side panel, prices can range from $400 up to $1,500 or more.

For tile, the costs can be more expensive. Prices depend on the size and complexity of the tiling project and may range from $2,000 to more than $6,000. Generally, material costs for a tub surround are cheaper than material costs for tile, but labor costs may be more expensive for a tub surround because of the setup and installation process.

If you’re comfortable doing the work yourself, you can save money on labor costs. Ultimately, the decision of which option is cheaper will depend on the specifics of the project.

Does a tub surround go over drywall?

Yes, a tub surround can be installed over drywall. Drywall is a relatively smooth surface that can accommodate a tub surround if it has been adequately prepared with a waterproof sealant and adhesive.

The drywall must be secure and free of any cracks, especially when water will be involved. If a mold-resistant drywall is used, it can be installed directly over existing wall surfaces without any additional preparation.

The surrounding areas will need to be sealed again to provide a waterproof barrier. The installation process for a tub surround over drywall is usually straightforward and can be done as a DIY project.

Most tub surrounds come with easy-to-follow instructions, so anyone can successfully install one.

What is the easiest tub surround to install?

The easiest tub surround to install is an acrylic tub surround. Acrylic tub surrounds are lightweight and come in prefabricated panels that can be easily trimmed to fit. This makes them easier to carry, transport, and install than heavier, stiffer tub surrounds like ceramic tile.

Acrylic will also resist humidity better than other materials, making it ideal for humid climates. Installation is relatively easy because the panels can be cut to fit and they adhere to the wall using a silicone caulking or other adhesive.

Installation should take a minimum of two hours. To install, first mount the main panels and then trim the panels to the desired size. Once the panels are secure, caulk the perimeter and tub flange to seal the edges.

Then silicone the corner seams and perimeter edges and let the tub surround cure before using it.

Does taking out a tub decrease home value?

Yes, taking out a tub can decrease home value. Bathroom remodels are one of the top renovations that can increase the value of a home, and taking out a tub can have the opposite effect. Having a bathtub in your home will appeal more to most prospective buyers due to its convenience and comfort, and a bathroom without a bathtub is often considered less desirable.

Depending on the size of the bathroom and how long prospective buyers plan to stay in the house, it could either help or hinder the home’s value. It’s also important to note that different markets are affected differently.

If your home is located in an area with few families, or if the average home in your area lacks a tub, then taking out a tub may not impact the home’s value significantly. On the other hand, if the majority of the homes already have tubs, then taking out a tub may drastically decrease the value of your home in comparison to others.

Ultimately, the best way to determine how taking out a tub will affect your home’s value is to consult a real estate agent in your area.

How can I cover my existing bathtub?

One of the best ways to cover an existing bathtub is to use a bathtub liner. Bathtub liners are made from a variety of materials, including acrylic, vinyl, and molded composite. They are relatively easy to install and can be used to give your existing bathtub a whole new look and feel.

In many cases, you can choose from several colors and finishes to match your existing bathroom decor. The liner is cut to size in order to fit around your existing tub perfectly and can be followed with a new faucet, tub surround, and caulk to complete the job.

This is an inexpensive and effective way to update your existing bathtub in a relatively short amount of time.

How can I redo my bathtub without replacing it?

One way to redo a bathtub without replacing it is to resurface it. This involves cleaning and preparing the surface, then applying a specialized epoxy resin and topcoat to fill any cracks and create a smooth, glossy surface.

Another option is to use a refinishing kit, which includes the necessary materials and instructions to help you apply a durable, long-lasting finish to your tub. Additionally, you can use a tub liner to cover the existing surface, which will give your bathtub a fresh look without the need for extensive repairs.

Lastly, you could consider adding tile, stone, or wood accents to the walls or floors around your bathtub to give it an updated, more modern style.

What do you put behind a tub surround?

When installing a tub surround, there are a few things you need to consider putting behind it, such as the wall building materials, waterproofing material, insulation, and any additional accessories.

For the wall material, you will want to use a sturdy material such as cement backer board, concrete board, or greenboard for the walls. Depending on the size of the tub, you may also need to add extra wall stiffeners or supports such as studs.

You should also use a waterproofing material such as a PVC sheet or liquid membrane to waterproof the area behind the tub surround.

Insulation is also important to include behind the tub surround. You will want to use a product such as foam insulation or closed-cell spray foam. This will help reduce the sound from inside the tub and also help limit heat loss.

Finally, you may also want to install additional accessories behind the tub surround such as grab bars or accessory trays. These can be mounted to the wall and help make your bath time more comfortable.

What are tub and shower surrounds made of?

Tub and shower surrounds are usually constructed with a combination of materials, including waterproof membranes and vinyl, ceramic, or stone tiles to create a protective and durable seal between the wall and the tub or shower.

Waterproof membranes are required to prevent water from seeping through the wall and into the surrounding areas. Vinyl, ceramic, or stone tiles offer a more aesthetically pleasing look and help protect the wall from moisture and damage from water.

In addition, some tub and shower surrounds may also include metal trim or molding to provide additional protection from water damage and for decorative purposes.

Is my tub surround plastic or fiberglass?

To determine whether your tub surround is made of plastic or fiberglass, it will depend on the material that is visible after any fixtures and tiles have been removed. If the material is made up of a thin sheet – often composed of a plastic or vinyl material – it is likely plastic.

Plastic tub surrounds are typically more affordable, lightweight, and easier to cut and configure. On the other hand, if you are able to see a thicker and more rigid material, then it is most likely fiberglass.

Fiberglass is less prone to denting and extremely durable, making it a popular choice for tub surrounds. Additionally, it is relatively simple to clean and maintain.

Which is better for tubs acrylic or fiberglass?

The answer to which material is better for tubs, acrylic or fiberglass, depends on your specific needs and preferences.

Acrylic tubs are known for being more lightweight and are more comfortable than fiberglass tubs. They are also less expensive than fiberglass, making them a good choice if you’re on a budget. Acrylic tubs also tend to retain heat better than fiberglass.

The downside of acrylic is that it can be more prone to scratching or staining than fiberglass, so extra care should be taken when using these tubs.

Fiberglass tubs are usually heavier and more durable than acrylic, making them a good choice for long-term use. They are easier to clean than acrylic, and they are also more resistant to scratching. Fiberglass tubs also tend to be more expensive than acrylic, so if you’re on a tight budget this may not be the best option for you.

In summary, if you’re looking for a lightweight and affordable tub, acrylic is the better option. If you want a durable tub that is easy to clean and resistant to scratches and staining, then fiberglass may be the right choice for you.

Ultimately, it is important to consider both the cost and benefits of each option before deciding which material is best for your tub.

What is the longest lasting bathtub material?

The longest lasting bathtub material is enameled steel. This type of material is made out of a heavy cast iron base covered with a layer of porcelain enamel. It provides superior durability and is much more resistant to staining, scratching and impact than other materials.

It is one of the most popular and cost-effective choices for bathtubs, and when properly maintained can last for decades. Additionally, enameled steel is relatively easy to clean, non-porous, and safe for use with certain acids and alkalis.