Skip to Content

How much does it cost to change a tub to a shower stall?

The cost to change a tub to a shower stall will depend on several factors, including the size of the existing tub, the materials you choose, the contractor you hire, and the amount of labor required.

Generally, the cost can range anywhere between $3,000 and $7,000. This cost typically includes the cost of the shower stall itself, as well as any additional plumbing and electrical work required. If you choose a high-end shower stall, the cost may go higher.

Additionally, if there is already existing plumbing and electrical in place, costs may be reduced. It’s best to get several estimates from contractors to determine the cost of your project.

Is it cheaper to replace a bathtub with a shower?

Generally, it is cheaper to replace a bathtub with a shower. Depending on the size, quality of materials, fixtures, and extras like tile or seating, the cost of replacing a bathtub with a shower can range from a few hundred dollars to several thousand.

If you are merely looking to replace the bathtub with a basic shower, you can usually plan to spend around $1000 for a standard shower kit and installation. That cost may be more for a larger shower system or a more premium quality unit.

Conversely, if you replace a bathtub with a luxury shower system with additional bells and whistles, the cost may rise to several thousand dollars. Ultimately, the cost of replacing a bathtub with a shower will depend on your individual needs, fixtures, installation, and the quality of the materials used.

It is always recommended to consult with a professional contractor to get accurate pricing.

Can you remove tub and replace with shower?

Yes, it is possible to remove a tub and replace it with a shower. This type of remodeling project requires careful planning and consideration of the potential costs. Depending on the size, materials, and complexity of the project, the cost to remodel a bathroom can range from a few hundred dollars for a simple budget-friendly update, to tens of thousands of dollars for a full-scale renovation.

When you plan to replace a bathtub with a shower, several factors should be taken into account. Some important considerations include:

-The size and layout of the bathroom. The shower should fit within the space without overcrowding the room.

-The water source. Make sure the shower head is near a water source. Furthermore, if you plan to install a thermostatic valve, a hot and cold water supply will be necessary.

-The type of shower. Such as framed, sliding, and steam showers. Each type of shower has its own advantages, so it is important to consider which type will best suit your needs.

-The type of tile you will use. Tiles come in all sorts of materials, colors, styles, and sizes. You should choose a tile that works well with the overall design of your bathroom.

Installing a shower can be complicated, so it is best to consult with a professional for expert advice. A plumbing contractor or a bathroom remodeling specialist can help you choose the right shower for your needs and will ensure that it is installed correctly.

Can you replace a tub with a walk-in shower?

Yes, it is possible to replace a tub with a walk-in shower. Depending on the existing bathroom layout, you may need to reconfigure and update existing plumbing, add a new floor drain, and extend the existing walls of the existing tub space.

Additionally, depending on the type of shower you wish to install you may need to purchase a shower door, showerhead, and insulated shower base to ensure proper installation and a leak-proof seal.

To create the best shower for your bathroom, you should always work with a professional remodeling contractor experienced in bathroom transformations. They can identify all the necessary steps from beginning to end to ensure that the job is properly completed and within the appropriate budget.

Does removing tub hurt home value?

Removing a tub from a home does not necessarily hurt a home’s value; however, it can have an impact depending on how it is done. If a large soaker tub is removed, it could decrease the value as potential buyers may imagine a relaxing soak after a long day at work.

However, if the tub is small and dated, then it could actually add value when removing it as the room could take on a more up-to-date aesthetic with modern fixtures and materials. The effects of removing a tub could also depend on the local housing market, as removing a tub in one area may hurt a home’s value while in another it could add value.

Additionally, if the tub removal results in bringing in more natural light to a room, this could increase the value. In the end, it is best to consult a professional such as a realtor or contractor to assess the impact of removing a tub and make the best decision for adding or maintaining value in a home.

How much does a walk in shower cost?

The cost of a walk-in shower depends on several factors, including the size of the shower, the materials and fixtures used, the installation costs, and any special features such as steam shower systems, tile work, or built-in shelving.

For a basic installation of a 60-by-36-inch shower, which should accommodate one or two people comfortably, the average cost for materials and fixtures is usually between $1,000 and $4,000. Installation costs will vary depending on the complexity of the project, with a minimum cost of around $500.

Additional features, like tilework, can add considerably to the overall cost, with a typical installation ranging in price from $5,000 to $14,000, depending on the choice of tile, the complexity of the design, and contractor’s fees.

Steam shower systems cost an additional $1,500 to $5,000, depending on the model.

Ultimately, the cost of a walk-in shower will depend on the size, materials and fixtures chosen, as well as the details of the design and any additional features.

How do you turn a bathtub into a shower?

If you want to turn your bathtub into a shower, the easiest and most cost-effective way to do it is to install a shower conversion kit. These kits are available at most hardware and home improvement stores, and typically include a shower curtain, rod, extension arms, valve, and riser.

Depending on the model you purchase, you may also need additional parts, like a showerhead diverter.

The first step is to measure to make sure the kit you purchase will fit your bathtub. Then, use a level to check if the new plumbing needs to be leveled. If necessary, use a simple tiling job to level the floor around the bathtub area.

Once you’ve checked for level, you’re ready to install the kit.

Start by removing the existing faucet and tub spout, and then adding the new valve, extension arms, and riser, following the kit’s instructions. Make sure the valves are in place and securely connected, and the new plumbing is supported, so it won’t move.

Next, hang the new shower curtain and rod, and then hook the diverter up to the showerhead. Test the functionality of the new shower to make sure there are no leaks. Finally, use caulk or silicone to seal any gaps around the new hardware, and you’re all done!.

What is the labor cost to remove and replace a bathtub?

The labor cost to remove and replace a bathtub can vary greatly depending on the specific bathtub, as well as the contractor performing the job. Generally speaking, for a mid-level bathtub, the total labor cost to remove and replace the bathtub can be anywhere from around $400-$800, with a few factors that could push that cost higher or lower, such as the size, access points, and any additional materials and fixtures that may need to be replaced.

Things that could add to the cost of the job are any existing tile walls which may need to be removed in order to remove the bathtub, any additional plumbing or fixtures that may need to be adjusted or replaced, as well as the cost of the new tub itself.

Is a house worth more with a tub or shower?

When it comes to deciding on whether a house is worth more with a tub or shower, it really depends on the current housing market, the condition of the house, the size of the house, and the preferences of potential buyers.

Generally speaking, in a typical market, a house with a shower may be more desirable than one with a tub, as many people opt for the convenience of a shower over the luxury of a tub. On the other hand, if the house is quite spacious and is in a desirable area, a tub may be more suited for the overall aesthetics of the home and may be favored by potential buyers.

Ultimately, it is best to consider the big picture and the type of neighborhood in which the house is located before making the final decision.

Why do new homes not have bathtubs?

And a combination of factors may influence this decision. One primary reason is increasing cost. Building and installing a bathtub can significantly increase the cost of the new home, and many builders are opting for showers to help keep costs down.

Additionally, many buyers are choosing showers over tubs since they take up less space and are easier to clean.

Another potential factor is the changing preferences of modern households. Today’s younger generations tend to value convenience and efficiency, which can lead them to choose showers over bathtubs. Mobility can also be an issue, as some households with elderly, disabled or limited-mobility individuals may not be able to access or use a bathtub, while they can still access a shower.

Finally, cultural preferences may come into play, since some cultures prefer showers and consider them to be a more hygienic option than tubs.

In the end, the decision to include a bathtub or a shower in a new home may be up to the homeowner. Factors such as cost, space, convenience and preference may all influence the choice of tub or shower.

Do buyers still want bathtubs?

Yes, buyers still want bathtubs. Many people still prefer the traditional and luxurious experience of a bathtub, rather than a shower. Bathtubs take up more space and are more expensive than showers, but for many people, it’s worth the luxury experience, especially if they have a larger bathroom.

Bathtubs are also becoming a focus for creative design, with some homeowners opting for larger, claw-footed tubs. For those looking for a low-maintenance experience, there are many acrylic tubs, which are easier to clean than other materials.

Many people also like to combine their shower and tub in one, so they can enjoy a relaxing bath and a quick rinse. Ultimately, bathtubs or showers come down to personal preference, but the demand for bathtubs is still strong.

What is the average cost to convert a bathtub to a shower?

The average cost to convert a bathtub to a shower will depend on the type of shower being installed, the complexity of the project, and the materials and labor associated with the project. Generally speaking, the cost to convert a bathtub to a shower ranges from $1,500 to $5,000.

Starting at the lower end of the budget, a basic conversion with minimal labor requirements and standard fixtures could cost between $1,500 and $2,500. This will include the cost of the shower, tub surround, associated fixtures, and labor.

The basic fixtures might include a single handle shower, a shower head, a shower valve and drain, and a vinyl or fiberglass enclosure or tub surround.

Mid-range conversion costs might reach $3,000 to $4,000, with some more complexity involved. This might include installing shower walls, tile, fixtures with two handles, a diverter valve, and/or additional accessories such as a seat or jets.

The higher end projects, costing between $4,000 to $5,000, might include more extensive tile work, custom shower walls, and extensive plumbing work.

If you’re planning to convert your bathtub to a shower, it’s important to consult a professional for an estimate based on the specific requirements of your project.

Will Medicare pay for a tub conversion?

Yes. Medicare can pay for a tub conversion as long as it is considered a medically necessary item. These conversions often involve the removal of existing bathtubs and showers and the installation of showers or lower platforms designed for those with limited mobility.

To be eligible for Medicare coverage, a medical doctor or other health care practitioner must certify that the conversion is necessary for the person’s health. Additionally, the physician must specify which type of conversion is needed, whether it’s a raised shower platform or a lower shower threshold, and the cost must be reasonable.

If all of the requirements are met, Medicare will often cover the cost of the conversion.

What is involved in replacing a bathtub?

Replacing a bathtub involves several steps, including removing the existing tub, preparing the area, installing a new tub, and connecting the plumbing.

Before you start, it is important to ensure you have all the necessary tools and materials. This includes protective gear, tape measure, screwdrivers, hammer, pry bar, putty knife, utility knife, copper fittings and pipes, caulk, silicone sealant, and of course the new bathtub.

The first step is to remove the existing tub. This typically involves disconnecting any pipes connected to the tub and then lifting it out of the enclosure. It’s advisable to place a cloth or tarp underneath the old tub to make the removal process easier for yourself and to protect the flooring.

Once the old tub is removed, you will need to prepare the area. This involves cleaning and sanding the enclosure, checking to make sure the corners are square, and any drywall repairs may need to be made.

Once the area is ready, you can install the new tub. Be sure to check the instructions that came with the tub for the specific steps related to that product. Typically, you will need to make sure the tub is level and secure it in place with wall supports and screws.

Finally, you can connect the plumbing for the new tub. You will need to make sure all the pipes are properly connected and sealed with caulk or silicone sealant. Once everything is connected, you can turn the water on and check for any leaks.

Once all of the steps are followed, the new bathtub is installed and ready to be used.

Is it expensive to remove a bathtub?

Removing a bathtub can be expensive depending on the complexity of the project and the materials needed to complete it. If the bathtub isn’t connected to a plumbing line, the removal cost may be relatively low since the only thing that needs to be done is to physically remove the tub from the area.

However, if the tub is connected to a plumbing line, the removal cost can be much higher since a plumber needs to be called in to break apart the pipes and disconnect the lines before the tub can be taken out safely.

Additionally, if there is tile or other flooring around the tub, the cost may increase since there may be a need to repair any damage caused by the removal process. In general, it is wise to contact a professional to get an estimate of the cost before beginning the removal project.