Skip to Content

How much space is needed for a Japanese soaking tub?

When it comes to how much space a Japanese soaking tub requires, it will depend on the specific model. Generally speaking, these tubs are typically 25 to 40 inches deep, and 4 to 6 feet in length. Some models may also have a soaking bench inside, so the overall dimensions of the tub may require more room.

If your bathroom is not large enough, or if the layout is not conducive to a larger tub, you can also find models with a smaller footprint. For instance, rounded corner or trio-style tubs are often available in more compact sizes.

As a general rule of thumb, make sure to leave at least a couple of feet of floor space around the tub to make it easier to get in and out. Additionally, be sure to check the manufacturer’s instructions for the specific model to ensure that you are selecting a tub that will fit comfortably in your space.

What is a good size for a soaking tub?

When it comes to choosing the size of a soaking tub, it really depends on the size of your bathroom and personal preference. Generally, most people prefer larger soaking tubs which range from 60″ x 32″ to 72″ x 36″ or are even bigger.

On the smaller end, 48″ x 32″ tubs can also be a great size. If your bathroom is smaller, you may have to opt for a deep soaking tub with a shorter length, such as a 38″ or 44″ length. Other factors to consider are the shape of the soaking tub and how many people plan to use it.

Square or rectangular tubs are good for couples, while oval or hourglass shaped tubs are great for relaxing by yourself. No matter what size you choose, make sure the tub will fit comfortably in your space, and you’ll enjoy a cozy, stress-free soak every day.

Do you tile under a soaking tub?

Yes, you should tile under a soaking tub. Tiling under a soaking tub is important for protecting the subfloor from water damage, as well as helping to insulate the tub. When tiling around a soaking tub, make sure to use the correct type of tile to help prevent slipping when getting in and out of the tub.

Start by laying a waterproof underlayment, such as a rubber flooring membrane, over the subfloor to help protect the wood from water damage. After the underlayment is in place, install cement backerboard over the top and secure it with tile adhesive and screws.

Once the backerboard is in place, you can tile the area around the tub. Make sure to use a water-resistant tile that is rated for wet areas and use a waterproof grout to help prevent water from seeping through the grout joints.

Finally, seal the grout to help protect the surface from water damage.

Are soaker tubs worth it?

Soaker tubs are definitely worth considering if you’re looking to upgrade your existing bathroom fixtures. Not only do they look more aesthetically pleasing than traditional bathtubs, but they also come with a variety of features that make them incredibly comfortable.

Soaker tubs are designed with a deeper basin that envelops the body more fully than traditional bathtubs, creating a comfortable, spa-like experience. The deeper basin also provides ample support for those looking to relax in their tub without the worry of slipping.

Furthermore, soaker tubs are often equipped with air jets that generate a soothing stream of air bubbles to increase relaxation. Many soaker tubs also come with LED mood lighting, allowing for personal customization and creating a truly unique experience.

On top of all of this, because of the greater capacity of soaker tubs, you will likely save water each time you use it. All of these features make soaker tubs an appealing upgrade for any bathroom and make them well worth their investment.

Are soaking tubs practical?

Soaking tubs can be a great option for anyone looking for the ultimate in relaxation and bathroom luxury. Soaking tubs provide a deep, full-body experience and can be incredibly therapeutic. Despite their luxurious look, many soaking tubs are actually quite practical.

They are generally shallower than standard-size tubs and take up less space, making them ideal for smaller bathrooms and half baths. The deep soaking experience they provide also means that less water is needed to fill the tub, which helps save on energy and water costs.

Many soaking tubs also come equipped with air jets that provide a massage-like effect to relax tired muscles. So, while they may look a bit fancy and luxurious, soaking tubs can actually be a practical choice for any bathroom.

Where do you put the faucet on a soaking tub?

The faucet for a soaking tub should be installed on the back wall of the tub. It is typically mounted higher than the tub so it will not disrupt relaxation while in the tub. The plumbing shut offs should be installed near the faucet and in an accessible location.

The faucet should be connected to a hot and cold water line, and if a handheld showerhead is desired, then an additional line is needed. The instructions of the faucet and the specs of the tub should be followed for the installation to ensure all components are compatible.

The soaking tub should also be positioned close to a drain for easy access for filling and draining.

Do you leave gap between tub and tile?

Yes, it is important to leave a gap between the tub and the tile as this allows for movement as the tub/tile settle over time. This movement could be caused by weight changes on the floor from regular use or expansion from changing temperature and humidity in the room.

When this movement occurs, the tub can shift out of place if there is not a gap. Think of it like a rubber band. The gap is designed to be the size of a grout line and will be either filled with caulk or colored grout that matches the rest of the tile in the area.

Additionally, this gap will help prevent water and moisture from seeping underneath the tub, which can cause water damage to the floor it’s sitting on over time.

How much space should be between wall and freestanding bath?

The recommended amount of space between a wall and a freestanding bathtub is three inches. This allows for access to the plumbing connections behind the bathtub as well as providing room to keep necessary items and tools.

In order to create a flush look, one inch of plywood should be attached to the wall, and then the bathtub should be affixed to the plywood using appropriate screws. In addition, a waterproof membrane must be applied along the entire back, sides and bottom of the bathtub to the surrounding walls or plywood.

This ensures that any water seepage or overflow will not damage the surrounding surfaces or cause mold and mildew to form.

How far from wall does a freestanding bath need to be?

The exact distance a freestanding bath needs to be from a wall or any other surface depends on the specific bathtub model. Generally speaking, most freestanding bathtubs require a space of at least 15-20 centimeters between the outer sides of the tub and the wall.

Additionally, most freestanding bathtubs also require a minimum 4” lip that hangs over the floor or any other surface on which the bathtub is sitting. Therefore, a rough estimate would put the freestanding bath distance from any wall or surface at least 18-25 centimeters or more.

Ultimately, the best way to ensure the correct distance from the wall is to consult your bathtub’s specific installation instructions.

Can a freestanding tub be against a wall?

Yes, a freestanding tub can be against a wall. It is a great way to save space and can look very stylish in a bathroom. Freestanding tubs are designed to be easily installed and can rest against a wall if there is adequate support and insulation.

When placing a freestanding tub against a wall, ensure that it is securely affixed and that any potential water that could escape is properly trapped. You may need to use an additional lip or gasket to ensure water remains where it should.

Additionally, you will want to make sure that the wall you are placing the tub against is structurally sound and able to bear the weight of the tub. Lastly, installing a tub against the wall allows for a wider opening for easier access and a more open look.

How far should a bathtub be from the wall?

The recommended distance that a bathtub should be placed from the wall will vary depending on the type of bathtub and the surrounding wall configuration. For example, Freestanding tubs should be kept a distance of 1-2 feet away from the wall to allow sufficient space for installation and cleaning.

With built-in tubs, it is recommended to leave a space of 6-12 inches from the wall for easy access to the pipes and for cleaning purposes. The amount of space left between the bathtub and the wall should also depend on the size of the tub.

Generally, larger tubs require more clearance space from the walls and may need a distance of up to 4 feet. Additionally, some type of tubs, such as claw foot tubs, might have limitations as to how far they can be from the wall.

If in doubt, consult a professional plumber on the best positioning for the tub, and for any additional information on space requirements for different types of tubs.

How much clearance do you need around a freestanding tub?

The recommended amount of clearance around a freestanding tub is at least 36 inches, allowing enough room for you to be able to enter and exit the tub safely. This clearance space should be directly in front of the tub, and not at an angle.

You can choose to extend the clearance space further if you plan to have décor or other items around the tub, such as a vanity or chair. Ideally, you should create a minimum of 36 inches on each side of the tub, as it will provide more access, not to mention a spacious feel to the room.

It is also a good idea to consider how much room you will need for plumbing fixtures, either if you choose to have them within the wall or above the tub. This can help determine how much clearance you need on the side and back walls of the tub.

When deciding the total space you will need for your freestanding tub, don’t forget to include extra room for any decorative items you plan to add, as well as space for any cleaning or maintenance needs.

Should a freestanding bath be fixed to the floor?

When installing a freestanding bath, it is essential to consider both the weight and size of the bath, as well as the type of floor on which it will be placed. As a general rule, freestanding baths should be fixed to the floor for safety reasons, as the extra support will help to ensure that the bath remains stable and secure.

Depending on the type of floor and the material from which the bath is made. For concrete floors, the bath can be bolted down with a hammer drill and wall plugs. Alternatively, for wooden floors and for bathrooms on the upper floors of a building, it can be fixed using heavy-duty brackets and bolts.

When it comes to fixing a freestanding bath to the floor, there are various products available to suit different types of baths. For example, high-strength adhesives are ideal for use with stone and marble baths, while stainless steel brackets can be used with porcelain, acrylic, and fiberglass ones.

In addition to ensuring the bath’s stability and security, fixing it to the floor can also help to protect it against minor miscalculations and misalignments during installation. It also plays a big role in improving the overall look of the bathroom, as the bath will appear far more aesthetically pleasing when it is firmly fixed to the floor.

Therefore, for all these reasons, it is highly recommended that a freestanding bath should be fixed to the floor.

What is a Japanese bathtub called?

A Japanese bathtub is known as an ofuro. Ofuro is a type of bathtub typically made from hinoki (Japanese cypress) wood or bamboo. They tend to be much deeper and smaller in size than traditional Western-style bathtubs, allowing the bather to sit with the water level up to their chin.

Ofuro tubs are closely associated with Japanese culture and bathing rituals. Generally, they are used to practice ritual cleansing before entering a Japanese bathhouse (sento) or hot spring (onsen). The ofuro can also be filled with hot water and used as a more traditional-style bathtub to soak in.

Do Japanese homes have bathtubs?

Yes, many Japanese homes do have bathtubs. While the traditional bath style in Japan is a deep, long bathtub known as a “Ofuro,” there are many modern homes that feature a standard North American-style bathing setup – meaning a shower/tub combo or separate shower coupled with a bathtub.

Japanese bathtubs are typically made of a wooden material and are large enough to accommodate more than one person. They also have stools or other benches on the side, so that people can kneel while they bathe.

Ofuro baths are traditionally filled with piping hot water from a boiler, either downstairs or outside the house, before bathing. However, in modern homes, it is more common to have a tub with a self-filling mechanism.

Today, there are also acrylic, synthetic, and steel bathtubs available for those that want to choose a more contemporary style.