Skip to Content

How tight should tank to bowl bolts be?

When installing or repairing a toilet, it’s important to ensure that all bolts are properly tightened. The bolts should not be so tight that they break, nor should they be so loose that they do not properly secure the tank to the bowl.

The right amount of tightness will depend on the type of nuts the toilet tank bolts have and the type of material they are connecting. Generally, tank-to-bowl bolts should be tightened by hand until they are snug and no excess movement is present.

To ensure a secure connection, you can manually tighten the bolts with a wrench, but this should be done carefully and only as much as necessary. Additionally, it is important to ensure that the washers and washer nuts are correctly installed to avoid water leaks.

Be sure to always use a quality wrench that is the correct size for the bolts, and when in doubt about your ability to tighten the bolts, it may be best to consult a professional to ensure a secure fit.

How do I know when toilet bolts are tight enough?

When tightening toilet bolts, the goal is to have them be securely fastened without stripping or damaging the bolts or nuts. The best way to ensure that they are tight enough is to use a torque wrench.

A torque wrench allows you to accurately set the amount of torque that you need to apply to the nut, based on the manufacturer’s recommendation. Once the torque wrench indicates that the correct amount of torque has been applied, you can be confident that the bolts are tight enough.

If you do not have access to a torque wrench, you can also use a standard adjustable wrench, as long as you pay careful attention to the tightening process and make sure not to overtighten the bolts.

How do you secure a tank to bowl?

To secure a tank to a bowl, it is important to first prepare the surfaces that the gasket and toilet bowl bolts will secure against. The toilet bowl should be inspected for any kind of damage to the porcelain which could interfere with the seal and cleaned of all debris, soap, and residue.

The bottom of the tank should be wiped down to ensure that the tank is clean and free of anything that may interfere with the seal. Once the surfaces have been prepped, a tank-style wax gasket should be placed around the opening of the bowl.

Position the tank over the bowl, then use the tank bolts to hold it securely in place. The tank should be firmly pressed against the gasket in order to create the tightest seal possible. Once the tank is in place, hand tighten the tank bolts and washers.

If needed, a wrench can be used to make sure the tank bolts are secure. Tighten the tank bolts until the gasket is snug. Finally, check to make sure the tank is secure by rotating it gently and test the seal by flushing the toilet.

Should toilet tanks wiggle?

No, toilet tanks should not wiggle. In a properly installed toilet, the tank should be securely attached to the bowl. If you notice that your toilet tank is wiggling, it is most likely due to an issue with the installation or the toilet components.

An improperly installed or failing toilet part can cause the tank to wiggle and rock, which can lead to leaks. Therefore, it is best to address the issue to make sure the toilet is installed correctly and the parts are working properly.

How do you keep a tank from popping out of the ground?

Regulating a tank’s environment and providing appropriate support are critical components of preventing it from popping out of the ground. Here are some tips for keeping a tank secure:

1. Half-fill the tank: To create a stable foundation and reduce the weight, the tank should never be completely full.

2. Prioritize proper placement: Make sure the tank is placed on a flat surface, minimize the number of slopes and turns, and avoid any areas prone to flooding or shifting.

3. Anchor the tank: To keep the tank from shifting or becoming unmoored, it is recommended to anchor the tank to the ground using straps, cables, or bars.

4. Install a liner: Install a liner (such as PVC or polyethylene) to help protect the tank from shifting and reduce the likelihood of ground movement.

5. Monitor the tank: Check the tank regularly for signs of cracks, leaks, or damage.

With these strategies in place, a tank should stay securely in the ground. If a tank ever does need to be moved, it’s important that a professional be consulted who can help safely and securely relocate and reinstall the tank.

What kind of water closet has a tank bolted directly to the Bowl?

A water closet with a tank bolted directly to the bowl is known as a Close-Coupled Toilet. This type of toilet is the most common type of toilet found in North America. It has a two-piece design with a tank mounted directly to the bowl and held in place with bolts.

The tank is usually made of vitreous china and the bowl is made of either ceramic or vitreous china. This toilet is ideal for smaller bathrooms as it takes up less space compared to a one-piece toilet.

The Close-Coupled Toilet is also comfortable to use because the flush handle can be reached easily from the side of the tank. However, it does require more frequent cleaning and maintenance than other types of toilets.

How do you keep a holding tank from floating?

One way to keep a holding tank from floating is to make sure it is filled to its specified capacity. It’s important to properly fill a holding tank according to the manufacturer’s guidelines, because too much weight can cause the tank to sink, while too little weight can cause it to float.

The amount of weight inside the holding tank should be calculated accurately to establish the correct buoyancy. Additionally, you should consider strategically filling the holding tank with its contents in an evenly distributed manner.

This will help keep the tank balanced so it will not float or sink. Another way to ensure the tank stays put is to anchor it securely in place. This can be done through the use of supports, stakes, posts, or a combination of these methods.

You can also increase the weight of a holding tank by adding ballast, such as sandbags or heavy objects, which will help it stay grounded in the event of a water surge or waves.

Can you store gasoline in a steel transfer tank?

Yes, you can store gasoline in a steel transfer tank as long as it is constructed with appropriate materials and is rated for gasoline use. Steel is a popular material for transfer tanks for various reasons.

It is strong, durable, and can withstand extreme temperatures. When choosing a steel transfer tank for gasoline storage, however, make sure that it is made from mild steel rather than stainless steel as stainless steel can corrode and contaminate your fuel.

Additionally, the tank should have been designed to safely contain the petroleum content, should be fitted with a locking cap or lid, and should have an installed shutoff valve. Finally, it is important to ensure that the tank is certified to be safe and suitable for liquids such as gasoline.

Is there a seal between the toilet tank and bowl?

Yes, there is a seal between the toilet tank and bowl. This seal typically consists of a wax ring that is placed is between the toilet tank and the toilet bowl. This seal is responsible for holding the water in the tank so that it can flush the toilet properly when needed.

The wax ring helps to form a seal between the two parts, which helps to stop water from leaking out and causing damage to either part. Additionally, it is also important to make sure that the seal is properly seated and secured to ensure that it is effective and that it will last for many years.

Replacing the wax ring should be done if the toilet is leaking or if water is found around the base of the toilet bowl.

What size wrench for toilet tank bolts?

The size of wrench you need to remove the bolts from a toilet tank varies depending on the model of toilet. Common sizes of bolts found on toilet tanks include 1/2-inch, 7/16-inch, and 3/8-inch. Before purchasing a wrench, it is important to measure the head size of the bolts that are attached to the tank to determine which size wrench will work.

Additionally, it is a good idea to purchase a wrench that has adjustable heads so that you can use it on multiple sizes of bolts. You may also need a plumber’s wrench, which is designed with a long handle to help reach fasteners located deep in the toilet bowl.

Lastly, when choosing a wrench, be sure to pick one that is strong and durable. This will help it to last a long time and make sure it is ready when you need it.

What size are tank to bowl bolts?

The size of tank to bowl bolts varies depending on the type and size of the tank. Most tanks have 3-4 bolts that range in size from 1/4 inch to 1 1/2 inch. To ensure a proper fit, you should use the bolts that are specifically recommended for the tank being installed.

If replacement bolts are necessary, they should match the originals in size and length. Additionally, there may be larger bolts used to secure the tank to the bowl. If the toilet is a standard two-piece model, the two-piece tank-to-bowl bolts should be between 7/16 and 1/2 inch in diameter and 1.

5–2 inches in length. If using wax ring, the bolts should not stick out any further than the underside of the tank, otherwise the seal will break.

Are toilet tank bolts universal?

No, toilet tank bolts are not universal. They come in a variety of shapes and sizes to suit different types of toilets. In most cases, the bolts are specific to the manufacturer and model of toilet, so you must check the specifications of your toilet to ensure that you purchase the correct bolts.

When purchasing toilet tank bolts, it is important to consider both the type of toilet and the size of the bolt as tank bolts come in both short and long lengths. Additionally, some tanks are designed with particular types of bolts and mounting plates, so they may require specific shapes and sizes of bolts.

When in doubt, it is always best to consult a manufacturer or plumber for the right toilet tank bolts for your specific model and type of toilet.

How do I fix a leaking toilet tank bolt?

Fixing a leaking toilet tank bolt is not a difficult task to accomplish. The first step is to turn off the water at the shut-off valve behind the toilet. Then, use a sponge to mop up any water remaining in the tank.

Once the tank is dry, locate the specific toilet tank bolt that is leaking. If the bolt appears to be broken, remove it and take it to a home improvement store to find an appropriate replacement.

Next, clean the area surrounding the leaking tank bolt – especially anything that may be obstructing the seal between the washer and the tank. Replace the old worn out washer with a new one and apply some plumber’s grease over the threads of the bolt using a small brush.

Place the bolt back in the tank, tighten until it is snug, and lock it in place using a wrench.

Finally, turn the water supply back on (using the shut-off valve) and flush the toilet to ensure that the leak has been eliminated. If you experience a slow leak, try tightening the bolt even more or replacing the washer a second time.

If all tactics fail and the leak is still present, contact a qualified professional to take over the rest of the repair.

Are all toilet tanks standard size?

No, not all toilet tanks are standard size. In fact, the size of toilet tanks can vary significantly depending on the product and manufacturer. Each type of toilet, such as a new or retrofit version, one-piece, two-piece, etc.

, will come with different sizes of tanks and bowls. Additionally, toilets come in a variety of shapes and sizes, and for that reason, the tank sizes vary as well. A variety of factors, including the room size, the style of the toilet, or even the height or weight of the users can influence the size of the toilet tank that is best suited.

Therefore, it is important to measure the space you have available to you, consult a restroom and plumbing specialist, and purchase a tank that is the most appropriate size for your needs.

How do I remove the bolts from my Kohler toilet?

Removing the bolts from your Kohler toilet requires a few basic tools such as a wrench, adjustable wrench, nut driver and torpedo level. Begin by using the adjustable wrench to loosen and remove the two nuts that hold the seat to the toilet bowl.

If your old seat is still attached, pry it up with a flathead screwdriver. Once the nuts are removed, loosen the two bolts from the side of the toilet, taking care to keep the nuts and bolts separated.

At this point, you may want to apply some penetrating oil to help loosen the bolts if they are stuck. Then use the nut driver or open end wrench to loosen and remove the bolts from the toilet. Once the bolts are removed, you can remove the old seat and replace it with a new one, using the same nuts and bolts.

Finally, level the seat using the torpedo level and tighten the bolts securely.