Skip to Content

Is it possible to move a toilet in a bathroom?

Yes, it is possible to move a toilet in a bathroom. The process of doing so often requires disconnecting the water supply line, disconnecting and removing the toilet, and then moving it to its new location.

Depending on the layout of the bathroom, this could involve some minor or major bathroom renovations. If the distance that needs to be moved is greater than that of the supply line, it may also require extending the line and adding new fittings.

The project might include moving other components connected to the toilet, such as modifying the drain line and/or floor joists. Every project is unique, so it is important to consult a professional contractor to ensure that the job is done correctly.

Can I move my toilet in the bathroom?

Yes, you can move your toilet in the bathroom. Moving a toilet is not as difficult as you might think and with the right instructions, most homeowners can handle it on their own. Before you start the project you should check your local building codes and regulations, as the size and placement of the toilet may be dictated by law.

When it comes to the actual process of moving the toilet, you’ll need to start by completely draining the tank and bowl before disconnecting the fittings and shutting off the water supply. After that, you should be able to carefully lift the toilet from its current position and move it to the desired spot.

Once it’s in place you’ll need to reconnect the fittings and open up the valve so that the toilet can be refilled.

It’s important to test the toilet before finally securing it to the floor in its new place. You should flush it multiple times to ensure everything is working properly and that there are no leaks. Once you’ve located and sealed any leaks, you can secure it to the floor and your installation is complete.

How much does it cost to move a bathroom toilet?

The cost of moving a bathroom toilet can depend on a few factors, such as distance, complexity, material costs, and labor costs. Generally speaking, it will cost anywhere between $150 and $500 to move a toilet, depending on the aforementioned factors.

The distance of the move will affect the cost, as the more distance needed to move the toilet, the more time and money will be needed for the labor. Complexity of the move is another factor to consider; if the toilet needs to be raised or removed from the wall, the cost will be higher than if it could be moved as is.

The material cost includes the professional equipment needed to do the job, such as a sledgehammer, bucket, and chisel. Lastly, the labor cost will depend on the type of job needed. If the job is basic and the toilet can just be replaced, the labor cost will be lower.

If the toilet needs to be raised, the labor costs will be higher.

In conclusion, the cost of moving a bathroom toilet can range from $150 to $500, depending on several factors.

How much does it cost to move a toilet to the other side of the bathroom?

The cost to move a toilet to the other side of the bathroom will vary based on the work involved and the materials needed. In most cases, it will involve removing the existing toilet, resecting the plumbing, moving the drains, and possibly installing new subflooring, depending on the layout of the bathroom.

Other related costs could include the removal and disposal of the old fixtures, purchasing new fixtures and parts if needed, repair or repainting any walls, and re-connecting to the sewage system. Labor costs can range from several hundred to several thousand dollars, depending on how much work needs to be done, and the current condition of the bathroom.

In some cases, it may even be necessary to hire an architect to develop a detailed plan prior to beginning any work. All this taken into consideration, the cost to move a toilet to the other side of the bathroom can range from a few hundred dollars to several thousand dollars.

Can you move a toilet to where a shower was?

Yes, it is possible to move a toilet to where a shower was, however, it can be a complex process since you would need to completely remove and relocate the plumbing. Firstly, you would need to turn off the water supply to the shower and toilet area, but if the shower is still attached you will likely need to cut away and remove any existing plumbing.

Then you would need to cut away the flooring underneath the shower and dig out the soil for the new toilet base. With the new soil in place, you can build a new foundation for your toilet and then connect the necessary plumbing.

When the new connections are in place, you need to check for any leaks and then tile the area around the toilet and fit it in place. To finish, you would need to install any shower doors or a shower curtain, and then turn the water supply back on and check for any leaks.

Do you need planning permission to move a toilet?

In most cases, yes, you will need to obtain planning permission before you move a toilet. Depending upon where you live, the regulations set out by your local authority may require that you seek permission when making any structural changes to a property.

While in some cases you may not need planning permission, it is best to check with your local authority first.

The size, scale and use of your proposed changes when moving a toilet will also determine whether you will need to obtain planning permission or not. Generally, you may need to carry out work that will involve changing the layout of the property, such as rerouting drainage or repositioning the toilet in order to alter the room or other building feature where the toilet is being moved.

You may also be required to obtain an asbestos survey if the property is in a home constructed prior to the year 2000 and before any work takes place.

In some cases, you may also need to look into additional regulations, such as building regulations compliance, which covers all aspects of the way in which the space is used, such as ventilation, extractor fans and safety features.

Since regulations may differ from area to area, it is best to seek advice from your local planning authority in order to establish whether you need to apply for planning permission, or to discuss any possible exemptions.

How difficult is it to relocate a toilet?

Relocating a toilet can be a moderately difficult job depending on one’s experience level with plumbing and home improvement. For starters, it is important to turn off the water supply to the toilet before attempting to move it.

After the water is turned off, the next step is to disconnect the waste line from the floor drain. If a flange extender is needed to make the toilet fit in the new spot, a new one needs to be purchased and installed.

Next, wax seals must be placed around the waste line. After this, the toilet needs to be carefully tilted and lifted away from the floor drain. Once the toilet is in the new location, then the waste line must be connected and securely tightened.

Lastly, the water supply must be reconnected, checked for any leaks and adjusted.

Overall, relocating a toilet is not a difficult task, but it may require some practice and experience with plumbing. Basic plumbing tools and supplies are also needed in order to complete the task correctly and safely.

Can I use an old shower drain for a toilet?

No, it is not recommended to use an old shower drain for a toilet. Shower drains are designed for water drainage, not human waste. toilets need to be connected to a plumbing vent in order to allow the waste to be drained properly and the vent allows the air to escape.

Using an old shower drain could potentially cause serious plumbing problems and health risks due to the build-up of fumes and bacteria from the waste. It is better to invest in a new, correctly installed plumbing system for your toilet.

How far can you move an existing toilet?

You can move an existing toilet as far away from its original location as the plumbing and drainage allow. Depending on the distance, you may need to modify or extend the existing water supply and/or waste pipes.

If the plumbing setup lends itself to this, you can move the toilet up to 10 feet from its original location. If the required modifications become complicated and/or expensive, you might have to move the toilet only 6 feet.

An experienced plumber should be consulted before making any modifications to the plumbing or attempting to move the toilet yourself.

How do you slightly move a toilet?

If you want to slightly move a toilet, you’ll need to make sure that you have the right tools and materials to do it. First, you’ll need a shop vacuum and absorbent towels to suck up any excess water and to keep the area dry while you’re moving it.

You’ll also need a wrench and a standard screwdriver if the toilet bolts are stuck. To avoid damaging the toilet, use a hammer and a piece of wood to nudge it back and forth. Move the toilet in a clockwise direction by gently tapping on it with the hammer and wood until it slides into the desired location.

Once in place, you’ll need to reconnect the wax ring and make sure the toilet is seated properly with the floor. If the toilet is too loose, use plastic shims to snug it up. Make sure to tighten the bolts with a wrench but do not overtighten them – this can crack the porcelain of the toilet.

Finally, it’s always a good idea to caulk the base of the toilet after it’s been moved.

Can you switch a toilet and sink?

Yes, you can switch a toilet and sink, although it will require some plumbing and electrical work. If you are going to attempt to do the work yourself, you should make sure you understand the basics of plumbing, as well as electrical safety.

To switch the two fixtures you will need to replace the sink drain with a toilet flange and then move the water supply pipe to accommodate the new toilet location. You will also need to move the soil pipe from the sink location to the new toilet location.

If you have an electric sink you will also need to move the electrical wiring to the new sink location. Finally, once the plumbing and electrical work is complete, you will need to patch and repaint the wall where the toilet and sink were originally located.

It is recommended you consult with a professional plumbing or electrical contractor if you are not comfortable completing this project on your own.

How far can a toilet be from the main drain?

The standard distance a toilet can be from the main drain depends on the size and scale of the plumbing project. In general, the maximum distance from a toilet to the main drain should be 4 metres (13 feet).

However, when a soil pipe is run horizontally, measuring four metres from the toilet to the main drain may be impractical since there would be obstructions like walls, studs, and floors in the way. In such cases, it would be best to reduce the distance to between 2–3 metres (6–10 feet).

In some cases, an offset fitting is required to join two drain pipes of different sizes, allowing a further reduction in the distance from the toilet to the main drain. Additionally, when the installation is part of a plumbing system with a septic tank and drainfield, the minimum recommended distance is 6 metres (20 feet).

Does a toilet need to be against a wall?

No, a toilet does not necessarily need to be against a wall. Some people choose to place their toilet in the middle of the bathroom floor or even in a corner. This is a great option for smaller bathrooms who don’t have a lot of space to work with, as the toilet takes up less floor space in the center of the room.

Placing the toilet in the middle of the room can also help to create a modern or contemporary look for your bathroom. However, you do need to make sure that you have enough room around the toilet for comfortable use, especially if you don’t want to install a corner tank unit that would take up less space.

How much room do you need for a toilet?

To install a toilet, you will need at least 30 inches of clearance space in front of the toilet. This space allows enough room to sit comfortably without hitting your knees against the back of the toilet.

You will also need approximately 24 inches of depth behind the toilet, and 15–18 inches of width on either side. Additionally you will need at least 18 inches of clear space from the toilet to the nearest obstruction such as a wall, bathtub, or vanity.

Generally, a toilet should also be placed no less than 18 inches and no more than 24 inches from the center of the flushing pipe. These are basic guidelines for installing a new toilet, but be sure to measure your space before installing to ensure that you get the perfect fit.

Can you move the placement of a toilet?

Yes, it is possible to move the placement of a toilet. Depending on the space available, moving a toilet may involve the relocation of plumbing pipes and connecting them to new drain and supply lines.

This can be done during a bathroom remodel project and involves removing the toilet from its existing spot, cutting drain lines to the appropriate length and attaching new pieces, and re-installing the toilet.

Additionally, you will need to make sure that it is properly and securely mounted to the floor and that the floor is leveled and sealed. In many cases it may be necessary to hire a professional plumber to assess the existing plumbing and make the necessary modifications to move the toilet.