Skip to Content

Should flooring go under toilet flange?

Yes, it is recommended to place flooring under the toilet flange. This is because the flange needs a solid and stable surface to be mounted on. Otherwise, if the flange is not securely fixed onto the floor, it could cause the toilet to become loose over time.

Additionally, the flange will cover any unfinished edges when the flooring is in place, creating a neat and seamless finish. Installing flooring under the flange prior to installation will also help to prevent any water damage due to a clogged toilet.

It is also important to use the appropriate flooring materials when doing this. Hardwood, tile, and laminate are the most suitable materials to use—they should be strong enough to not be affected by water damage and heavy use.

Laminate must also fit directly over the subfloor for added support, as it is a relatively thin material.

How far should toilet flange be above finished floor?

The toilet flange, also known as the closet flange, is an important part of the toilet installation process and of needed for a properly functioning toilet. The flange provides the connection between the toilet and the drain pipe in the floor.

The flange also helps to secure the toilet to the floor and to prevent leaks. When installing a toilet, it is important to make sure that the flange is correctly placed and that it is the correct distance above the finished floor.

Generally, the flange should be approximately 1/4 to 1/2 of an inch above the finished floor to ensure a good seal and to prevent any leaks. It is important to be careful when positioning the flange to make sure there are no gaps between the toilet and the flange.

It may also be necessary to provide some additional support for the flange if it is not securely attached to the floor. The flange should also be properly leveled and sealed to help prevent any problems with the proper functioning of the toilet.

In summary, when installing a toilet flange it is important to make sure it is securely attached to the floor. The flange should be roughly 1/4 to 1/2 of an inch above the finished floor to ensure a good seal and to prevent any leaks.

Additionally, it is important to be sure the flange is properly leveled and sealed. Taking the time to make sure these steps are completed properly can help to ensure the toilet will function correctly.

Should toilet flange be on top of vinyl plank flooring?

No, a toilet flange should not be on top of vinyl plank flooring. Toilet flanges are usually installed on top of the subfloor and should not interfere with the flooring material. When installing a new flooring material, the toilet flange must be carefully positioned so that it lies beneath the subfloor, allowing the new flooring to be properly secured.

Inadequate securing of the flooring material can lead to movement, creaking, and bubbling; therefore, it is essential to ensure that the toilet flange is properly installed and not on top of the new vinyl plank floor.

What happens if you don’t caulk around toilet?

If you don’t caulk around your toilet, you risk potential water damage over time. Since the toilet is usually sitting on a tiled floor, not caulking the edges will leave an opening for water to seep down and settle, enabling mold to form and possibly damage the subflooring and/or the seam around the toilet.

Plus, not caulking can make the toilet feel uneven and insecure, create a dust and dirt trap, and it will look visually unappealing. Caulking is an important step in the installation of your toilet and should be done properly to prevent potential water damage and keep your bathroom looking its best.

Does a toilet flange go inside or outside the drain pipe?

The toilet flange typically goes around the outside of the drainpipe, as an anchor point for the toilet. The flange should be secured to the floor before the drainpipe is connected to it (if the flange isn’t already connected to the drainpipe).

If a wax ring is used to create a seal between the toilet and the flange, then the wax ring should go inside the drain pipe. A special type of flange, called a “no-hub flange,” can sometimes fit inside the drainpipe, which is useful in certain situations, particularly when the drainpipe is made of plastic.

It’s important to make sure that the toilet flange is correctly secured and sealed, in order to prevent leaks.

Do you put the wax seal on the toilet or the flange?

The wax seal should be placed on the flange at the base of the toilet. The flange is a metal or plastic ring that is attached to the floor and connects the toilet to the drainpipe below. The wax seal fits between the flange and the bottom of the toilet, creating a watertight seal.

It is important to make sure the wax ring is the right size; an incorrectly sized wax ring can cause a leak and a poor seal which can lead to serious damage to the floor and surrounding area. Additionally, the wax ring should not be placed on the toilet itself, as it needs to be pushed into the flange properly to create the necessary seal.

Do you install a toilet before or after flooring?

It is generally recommended to install a toilet before you lay the flooring. This ensures that there will be proper drainage, and that the flooring is not damaged during the installation of the toilet.

Installing the toilet first also allows you to make sure that there is adequate space for the toilet before you lay the flooring. Additionally, it is important to make sure that the toilet sits firmly on the floor.

The flooring can then be laid to ensure that the toilet is secure and stable. If you were to install the toilet after the flooring has been laid, it could be a difficult and messy process.

Do I have to remove the toilet to install vinyl plank flooring?

No, you do not have to remove the toilet when installing vinyl plank flooring. You can install the flooring around the toilet, but you do want to make sure you leave enough space for the flange when you lay down the planks.

If the flange is not tight against the floor, it can cause problems with the toilet seals. To ensure a proper fit and secure seal, you should check the flange and adjust the flooring accordingly. Before installing the vinyl plank flooring, you should clean the area and make sure it is completely dry.

You should also use a vapor barrier if you are installing the flooring in a bathroom or other damp areas. After removing the toilet, you should take special care to clean and prepare the area, as any dust or debris that accumulates under the floor can interfere with the installation.

Do you caulk all the way around a toilet?

Yes, it is important to caulk all the way around a toilet to help ensure a watertight seal between the floor and the toilet. Before caulking, you should thoroughly clean the edges of the toilet and the floor with a Lysol disinfectant or a similar cleaner.

After that, you can use a waterproof silicone caulk that can be found at your local hardware store or online. You should apply the caulk around the base of the toilet, making sure to go all the way around and fill any gaps.

If you can, use your finger or a tool to smooth it out, taking care to ensure the caulk seals the entire area. Once dry, the caulking should be comprehensive and effective in providing a seal that protects against water damage.

Should toilet flange be glued to pipe?

Yes, toilet flanges should always be glued to the pipe as this helps form an airtight and watertight seal. If a flange isn’t glued properly to the pipe, then leaks could form over time that could cause serious damage to the surrounding walls and flooring.

Additionally, the flange helps keep the toilet securely installed on the floor, so it’s important that the connection is strong and secure. It’s typically recommended to use PVC cement (also known as solvent cement) to properly glue the toilet flange to the pipe.

While it can depend on the exact material being used, PVC cement usually takes around 30 minutes to set. After the cement has dried and set properly, the toilet should be securely fastened to the floor and the flange.

Which comes first toilet or flooring?

When constructing a bathroom or restroom, the toilet should be installed before the flooring. This is because the toilet must be securely and properly attached to the existing plumbing system. While the flooring can be installed later, ensuring that the toilet is connected and secured will help prevent water damage to the flooring and surrounding walls while also ensuring that the toilet functions properly.

In addition, it is important to make sure that the toilet is level with the floor in order for it to work correctly. Installing the toilet before flooring also assists with the installation process, as it can be difficult to secure the toilet in place once the floor has been laid.

How do you prepare a room for vinyl plank flooring?

Preparing a room for vinyl plank flooring is an important first step in the installation process. Here are the steps to ensure that you are set up for success:

1. Thoroughly clean the subfloor: Before beginning the installation, you’ll need to make sure the subfloor is free of dirt, dust, grease, or anything else that could interfere with adhesion. Vacuum any existing flooring and use a damp mop to clean the area before beginning installation.

2. Check the moisture levels of the subfloor: Use a moisture meter to measure the moisture content of the concrete subfloor. It should be no higher than 5%, or else the planks could become warped or damaged.

3. Level the subfloor: If the subfloor has any large slopes or dips, you may need to use a self-leveling compound to even it out. Make sure to give the compound plenty of time to set before beginning the installation.

4. Create an expansion gap: An expansion gap is necessary to allow for the expansion of your vinyl planks as temperatures and humidity levels change. Measure the gap along all walls and use a piece of timber to mark the area.

5. Place the underlayment: The underlayment is necessary to create a smooth and sound surface for the planks to adhere to. Make sure the underlayment is level and flush with the expansion gap.

Once you’ve followed all the necessary steps, you’re ready to begin the installation process.

How does LVP hold up in a bathroom?

LVP (Luxury Vinyl Plank) flooring is an excellent choice for bathrooms, as it is very durable and holds up well to water. LVP is waterproof, which makes it ideal for high moisture areas like bathrooms.

It is also resistant to mildew and bacteria growth. All of these features make LVP a great option for bathrooms, as it does not need extra sealing or special cleaning products. It is also easier to maintain than carpet or hardwood, and is easy to clean and keep looking new.

LVP flooring is also scratch resistant, making it a perfect choice for bathroom floors, as it is unaffected by high heels or furniture. All of these features make LVP a great choice for bathrooms, as it stands up well to the moisture and wear that comes with bathroom use.

Do you need a moisture barrier under vinyl plank in bathroom?

Yes, you need a moisture barrier under vinyl plank in a bathroom. Moisture can damage your flooring and reduce the life of it. Having a moisture barrier in place helps provide an extra layer of protection.

This is especially important in bathrooms, because bathrooms contain an abundance of moisture due to sinks, bathtubs, and showers. This moisture can seep down and cause your flooring to warp, buckle, and swell if left unchecked.

With a moisture barrier in place, it will help to keep this moisture out and protect your flooring from water damage. To install a moisture barrier, you will need to spread a thin layer of adhesive on the floor to bond the moisture barrier to the floor.

This is important to make sure the moisture barrier will adhere properly and create a sealed moisture barrier. You can also use a self-leveling compound to help ensure a smooth, even surface for your vinyl planks to rest on.

Does LVP need underlayment in bathroom?

Yes, there are certain circumstances where underlayment may be required for installing luxury vinyl plank (LVP) flooring in a bathroom. Underlayment is important for providing extra cushioning and insulation.

It can also create a smooth, level surface for the LVP to adhere to, which results in a better finished product. Additionally, underlayment can increase sound dampening, which can be beneficial in bathrooms, where echo can occur.

When installing LVP in a bathroom, it is recommended that you use a moisture barrier between the subfloor and the underlayment. The majority of underlayments are made to protect the flooring from moisture, but the additional vapor barrier can help to prevent the growth of mold and mildew.

Certain types of underlayment, such as cork, can also provide an extra layer of water resistance and sound dampening.

Finally, if you are installing LVP over a concrete subfloor, it is recommended that you use a foam underlayment designed specifically for the job. This will help to give the floor more cushion, provide extra insulation, and reduce sound transmission.

In conclusion, while it may not always be necessary to use an underlayment when installing LVP in a bathroom, it can be beneficial in certain cases. Underlayment can increase sound dampening and cushioning, create a smooth, level surface for the flooring, and provide an extra layer of protection against moisture.