Skip to Content

What is the depth of a wall-mounted toilet?

The exact depth of a wall-mounted toilet will depend on the type and model, but typically wall-mounted toilets have an overall depth of between 25 and 35 inches (63. 5 cm and 88. 9 cm) from the wall to the front of the toilet bowl.

Wall-mounted toilets do not sit on the floor and instead are mounted to the wall. Because of this, the weight of the toilet is borne by the wall, allowing for a smaller footprint than floor-mounted toilets.

This is one of the main benefits of a wall-mounted toilet as it allows for more space in small bathrooms. However, it is important to measure out the space under the toilet before purchasing to make sure that the depth will fit in the available space.

How deep are in the wall toilets?

In general, in-wall toilets are designed to be installed within a wall cavity. This means that the back of the toilet is flush with the wall. Depending on the size of the wall cavity, the depth of the in-wall toilet may vary.

Standard models usually have a depth of between 7 and 8 inches, while extended models provide a depth of up to 12 inches for greater comfort. The exact measurements of each model will vary based on the specific model and manufacturer.

When planning a wall-mounted installation, it is important to measure the wall cavity before selecting an in-wall toilet. Additionally, there are a few models that are designed to fit within shallow wall cavities of less than 7 inches deep.

If a shallow installation is needed, these are the best choice.

How far off the floor is a wall hung toilet?

The exact distance off the floor that a wall hung toilet is installed may vary based on the specific model and person responsible for installation. The ideal height should be 15 inches from the floor to the center of the toilet bowl, which meets the ADA requirements for toilets.

In or order to make sure the wall hung toilet is properly installed, it’s important to make sure the correct mounting materials and bolts are secured to the wall and studs, ensuring a safe and secure installation.

When measuring the distance from the floor, always measure from the floor to the center of the toilet bowl, to make sure it meets the ADA requirements.

Are all toilets 12 inches from wall?

No, not all toilets are 12 inches from the wall. The distance from the wall to the center of the toilet bowl can vary from 8 to 14 inches, so the overall depth of the toilet from the wall can be anywhere from 9 to 15 inches, depending on the toilet model.

Additionally, the recommended distance from the wall in many bathrooms is often 1–2 inches farther away from the wall than the depth of the toilet, so the overall distance from the wall could be as much as 16–17 inches.

Furthermore, many bathrooms feature very limited space, so the overall distance of the toilet from the wall may be as little as 8 inches. As a result, it’s important to take accurate measurements of your available bathroom space before purchasing a toilet in order to ensure it fits properly.

Do all toilets sit the same distance from the wall?

No, not all toilets sit the same distance from the wall. Toilets can come in a range of shapes and sizes, and the distance they sit from the wall is dependent on the type of toilet and installation. Generally, older toilets tend to be longer, which means they sit further away from the wall, while modern toilets tend to be shorter, often being engineered with a shallower depth.

When it comes to installation, toilets are typically affixed to the ground with a flange, and if this isn’t correctly set, then the depth of the toilet can vary from the recommended level. Therefore, if you’re struggling with your toilet sitting too far away from the wall, check that your flange is aligned correctly with the wall and use a tape measure to ensure a consistent depth.

Do back to wall toilets save space?

Yes, back to wall toilets can be a great way to save some precious space in a bathroom. Unlike standard toilets which are mounted onto the floor separately from the wall, back to wall toilets are designed to save space by integrating a part of the toilet into the wall, creating a clean and sleek bathroom aesthetic.

This type of toilet typically requires the whole unit to be installed during the installation process and they are adjustable so that they can fit closely in between the floor and ceiling. This makes them an ideal choice for bathrooms with minimal space, as all your fixtures and fittings can be flush to the wall and out of the way.

As well as being better for smaller bathrooms, back to wall toilets can also look stylish and create a sophisticated look with their streamlined design.

How is toilet depth measured?

Toilet depth is typically measured from the wall behind the toilet to the front edge of the toilet bowl. Toilets are typically 12 inches deep, which includes the depth of the bowl and the tank. Some toilet models are designed to be deeper, such as those with the shape of a comfort-height toilet or a higher tank.

When measuring, keep in mind that the rough-in size, which is the distance from the wall to the drainpipe, must subtracted from the total depth to get the exact dimensions of the toilet. Other factors must also be considered, such as the distance of the tank to the base of the toilet, as well as the toilet seat clearance and the space around the toilet.

Therefore, measuring the entire toilet before purchase is essential in order to accurately determine the proper dimensions to fit the bathroom space.

Does toilet need to rest against wall?

In most cases, it is beneficial for a toilet to rest against a wall. This is because an anchored wall can help support the weight of the toilet and the water stored inside it. Additionally, mounting the toilet against a wall gives the toilet a more secure foundation, which can help to reduce any rocking or jostling when someone sits down on it.

Keeping it close to the wall also helps to make it easier to clean around the fixture and keep the area looking tidy. In addition, it can help with the installation of accessories, such as a toilet roll holder and a toilet brush, as keeping the toilet close to the wall provides a solid base on which to mount them.

However, some installations may require the toilet to be slightly away from the wall, for example, if the wall is not strong enough to support the weight of the toilet. In these cases, installing a reinforced frame behind the toilet is necessary to provide the necessary support.

It is also possible to have a wall-mounted toilet that is not actually touching the wall, but is instead installed with a gap between it and the wall. While this does mean it does not have the same level of support, it can be beneficial for making certain cleaning and installation tasks a little easier.

Are wall hung toilets height adjustable?

Yes, wall hung toilets are generally height adjustable. Most wall hung toilets are made to be adjustable so that users can customize the fixture to the height that is most comfortable for them. Wall hung toilets typically feature adjustable feet, allowing the height of the toilet bowl to be adjusted between 7 – 12 inches off of the ground.

This height adjustment is especially important for users who struggle to get up and down from a standard height toilet bowl. Additionally, wall hung toilets tend to be more accessible for disabled users, as it makes the transferring from a wheelchair to the toilet seat easier than with a standard height toilet.

Do all wall hung toilets need a frame?

No, not all wall hung toilets need a frame. Wall hung toilets are designed to be suspended off the ground, but the type of fixing required will depend on the design of the product and the type of wall.

Wall hung toilets may be hung with specialist brackets, or a concealed frame or carriers may be needed to ensure the toilet is securely fixed to the wall, which will also provide access to the waste pipe connection.

If a frame is needed, it will usually be supplied with the toilet, and it should be fitted with additional fixings before the toilet is mounted. It is also important to check whether the building structure is strong enough to hold the weight of the toilet, as wall hung toilets can be heavier than floor-mounted ones.

What is the most comfortable height for a toilet?

When it comes to comfort, there is no one-size-fits-all toilet height. Comfort is largely subjective and based on individual body shape, size, and flexibility. Factors such as height, disability, or health can all play a role.

Generally, a standard toilet is designed to be between 15 to 17 inches from the floor to the top of the bowl. This height is adequate for most people, but some may find that it is a bit too high or low.

A taller toilet, 18 to 19 inches from the floor to the bowl, is a popular option for some people, as is an ADA-compliant toilet which is typically 17 to 19 inches from floor to bowl. In addition, some manufacturers offer toilets in various heights ranging from 15 to 20 inches from floor to bowl to accommodate all heights and body types.

Ultimately, the most comfortable toilet for you is the one that works for your body. If you are taller, consider a taller toilet. If you have mobility issues or physical disabilities, an ADA-compliant toilet might be the best option.

You may also want to consider comfort height toilets, which are designed to be a few inches higher than standard height toilets in order to prevent unnecessary bending of the hips and knees.

What is the toilet height for seniors?

The recommended toilet height for seniors is 17 to 19 inches from the floor to the top of the toilet seat. The standard toilet seat height is usually 15 to 16 inches from the floor to the top of the seat, but a higher toilet height can offer seniors greater comfort and security.

The ADA also recommends a height of 17-19 inches for seniors to ensure accessibility and reduce the fatigue that can come from sitting for long periods of time. In general, a toilet seat should be set at a height that is comfortable for the user.

After you’ve decided on the appropriate toilet height for seniors, be sure to install grab bars near the toilet to provide extra support and stability.

Is a taller or shorter toilet better?

It really depends on the individual and their needs. A taller toilet can be better for those who have difficulty sitting or standing up because it makes it easier to transition between the two. A taller toilet is also better for taller individuals as it allows for more comfort and less strain on the knees and back.

On the other hand, a shorter toilet may be better for those with disabilities or limited mobility because it is easier to reach and use. It’s also better for those with smaller bathrooms, as it can make the bathroom feel more spacious.

Ultimately, it all depends on the individual’s needs and preferences.

What does assembled depth mean for a toilet?

Assembled depth for a toilet refers to the total distance from the wall behind the toilet to the back of the rim area, which is the part of the toilet bowl that users come into contact with when they are seated.

The depth is important because it affects how close the toilet is to the wall and what type of space is needed around it. The deeper the assembled depth, the farther the toilet will sit from the wall, allowing more space for a user to move around.

In some cases, a deeper assembled depth may also be required to fit the toilet into a space, due to subfloor conditions or other dimensional limits. An adequate amount of space is needed between the toilet and the wall, both to make it comfortable to use as well as to allow room for cleaning.

As a general rule, the ideal range for an assembled depth for a toilet typically falls between 28-38 inches.

What toilet has the shortest depth?

The Saniflo 023 Sanicompact Toilet has the shortest depth of only 18. 5 inches, making it ideal for smaller spaces. This toilet is designed to fit into tight spaces, allowing it to be installed where traditional toilets cannot.

It features a modern look and comes in white or bone. It requires no venting, no additional plumbing, and uses only one water connection, making it a great value for those looking to install a toilet in a tight space.

The Sanicompact is also equipped with a quiet and powerful macerator pump that helps ensure smooth waste disposal. Its low-profile design makes it easy to clean and maintain.