Skip to Content

What is the shortest depth toilet?

The shortest depth toilet currently available on the market is the Kohler Cimarron Comfort Height Toilet, which has a shallow water depth of just 11. 5 inches. This allows it to easily fit in small spaces and bathrooms without taking up too much room.

This toilet also features a sleek, contemporary design which will look great in any bathroom. It has an elongated bowl to provide superior comfort, as well as a PowerWash rim to keep the bowl clean with every flush.

Additionally, its advanced flushing technology helps to conserve water and make sure that waste is removed thoroughly with each flush.

What is smallest toilet dimensions?

The smallest toilet dimensions can vary greatly depending on the type of toilet chosen. Generally, a round-front toilet will be the most compact and the bowl itself might measure 16 ½” to 19 ½” from the wall to the center of the bowl.

An elongated toilet bowl will usually measure up to 30”. The total width of a round-front toilet, from the wall to the outside edges of the tank, might measure anywhere from 22” to 27”, while a elongated toilet bowl will typically measure from 28” to 31 ½”.

An elongated toilet will dent into the bathroom more than a round-front toilet, but can be a more comfortable size for taller users.

Do toilets have different depths?

Yes, toilets do have different depths, and this is due to the variations between different toilet designs, sizes, and shapes, as well as the varying types of plumbing installations needed for each one.

Some models of toilets are designed to fit very close to the wall and will have a shallower depth, while other toilets are designed to have a wider base and will have a deeper depth. Additionally, the depth of a toilet could differ depending on the type of plumbing installation.

Generally, toilets will have a depth of 11 to 14 inches, but this may vary depending on the size and design of the toilet.

How far does a toilet stick out from the wall?

The distance a toilet sticks out from the wall can vary depending on the type of toilet you have. With floor-mounted toilets, the toilet will typically stick out about 18 inches from the wall, though this can vary slightly depending on the specific design.

Wall-mounted toilets have the bowl extending from the wall by a little over a foot, while corner toilets will typically extend out 11-16 inches. Since each of these toilets are different, it’s important to measure the specific space you’re working with before purchasing a toilet to ensure it will fit.

How do you measure the depth of a toilet?

When measuring the depth of a toilet, it is important to consider the total depth from the finished floor to the top of the tank. To accurately measure the depth of a toilet, you will need a tape measure or measuring stick.

Start by measuring starting from the center of the toilet bowl, extending the tape measure to the bottom of the floor. This will give you the height of the toilet bowl. Then, measure from the top of the toilet bowl to the finished floor, accounting for any underlayment or floorboards.

Finally, measure the height of the tank, which should be the same as the bowl height. The total depth of the toilet can then be determined by adding the bowl height and the tank height together.

What height of toilet is for seniors?

For seniors, the ideal height of a toilet should be 17 – 19 inches from the floor to the top of the toilet seat. This is higher than a typical toilet, which clocks in at 15 inches. A higher toilet is better for seniors because it reduces the amount of bending and squatting, which can be difficult for older adults and can even be dangerous due to potential balance issues.

However, it is important to consider an individual’s needs and abilities when determining the most suitable toilet height. For those with mobility issues, it may be beneficial to install a handicapped-accessible toilet, which is usually at least 17 inches from the floor to the top of the seat.

The ADA also outlines other requirements for a handicap accessible toilet, such as a higher toilet tank and the inclusion of a minimum of 30-inch clear floor space in front of the toilet.

Are all toilets 12 inches from wall?

No, not all toilets are 12 inches from the wall. Toilets come in various sizes which can impact how far they are placed from the wall. Generally, standard-sized toilets need to be 12 inches away from the wall and some wall-mounted toilets may be flush against the wall, although the majority protrude 4-6 inches away from the wall.

Some elongated toilets may need to be placed 14 inches away from the wall. Individual toilets may vary from brand to brand, so it is important to check the specific measurements for the toilet being used.

Additionally, a person should measure the distance from the wall to the finished flooring, which may be thicker than traditional materials, before purchasing a toilet to ensure the toilet will fit and be the correct distance from the wall.

Is a taller or shorter toilet better?

The answer to this question really depends on the individual’s needs. For those with limited mobility, a taller toilet may be the better option due to its ease of use. The higher height of the seat makes it easier to get off and on without having to strain or reach.

Taller toilets also help reduce the amount of bending necessary when sitting or standing. For those with limited leg or waist strength, a taller toilet can give extra support.

However, for those who prefer a more traditional look, a shorter toilet may be the better option. Shorter toilets also do not require as much space in a bathroom, making them a good choice for those with limited space.

Additionally, shorter toilets may be more cost effective than taller toilets, making them the better option for those on a tighter budget.

Ultimately, the decision of whether to choose a taller or shorter toilet depends on the individual’s needs and preferences. It is important to consider factors such as mobility, budgets, and space of the bathroom when making a decision.

How much space do you need on either side of a toilet?

When it comes to leaving space on either side of a toilet, there is no definitive answer as the amount of space needed will be determined by the desired layout of the bathroom, type of toilet, and available space.

Generally, it is recommended to leave a minimum of 15-18 inches of open space on either side of the toilet. This is just enough room for a person to comfortably maneuver around the toilet and for a possible bidet to be placed.

For a roomier and more aesthetically pleasing look, however, it is recommended to leave a minimum of 21-24 inches of open space on either side of the toilet. This allows space for a small dresser or shelf to be placed, as well as a softer look and feel to the bathroom.

Additionally, it is important to consider a wall to wall measurement of at least 30 inches for larger people who may have difficulty maneuvering around the toilet.

Is my toilet a 2 inch or 3 inch?

The size of your toilet flange and the size of your toilet exit hole will determine if you have a 2 inch or 3 inch toilet. The most common options are a 2 inch flange for toilets that are not located on a slab foundation, and a 3 inch flange for those that are.

To determine which type you have, measure the diameter of the PVC pipe that extends from the floor or wall where your toilet is located. If the pipe is 2 inches in diameter, then you have a 2 inch toilet.

If it measures 3 inches in diameter, you have a 3 inch toilet.

How do I know if my toilet is 10 inch or 12 inch?

In order to determine the size of your toilet, you will need to measure the rough-in of your toilet. The rough-in is the distance from the wall or the center of the closet bolts to the center of the waste outlet.

If that measurement is 10 inches, then your toilet is 10 inch. If the measurement is 12 inches, then your toilet is 12 inch. To do this, use a measuring tape and measure the distance from the wall or the center of the closet bolts to the center of the waste outlet.

Additionally, the tank size is not always the same as the rough-in size so you may need to measure the length of your tank from the front of the tank to the center of the waste outlet to determine the size for sure.

What is a low profile toilet?

A low profile toilet is a toilet that sits low to the ground. It is designed to save space and provide a more comfortable seating position. Low profile toilets have a much smaller profile than the conventional toilets, thus they require less space in the bathroom.

They are typically no more than 15″ inches in height, making them ideal for those with limited space in their bathrooms. Besides the space savings, these types of toilets usually offer great comfort because the seating height is closer to the floor.

This makes it much easier for people with mobility issues to access the toilet. Additionally, because the toilet bowl sits lower than conventional toilets, the flush does not require as much force, making it more efficient.

Low profile toilets typically come with a variety of features and styles, allowing you to choose the best one that fits both your needs and style.

What depths do toilets come in?

Toilets come in a variety of depths, including comfort height and standard heights. Comfort height toilets generally measure around 16 to 19 inches from the floor to the top of the toilet bowl, while standard toilets typically measure anywhere from 15 to 17 inches.

While comfort height toilets are designed to make it easier for seniors and people with disabilities to sit down and stand up, they also provide extra legroom which can be beneficial for taller people.

While the exact depth varies from one toilet to another depending on the make and model, most toilets come with adjustable legs so that you can customize the height to your individual needs.

Whats the closest the toilet can be to the wall?

The closest a toilet can be to the wall is roughly 6 inches from the centerline of the toilet to the wall. This is to ensure there is enough space for the toilet to be installed and for maintenance work to be done.

This includes the distance for the wax ring to be properly sealed, the plumbing fittings, and bolts, as well as room for the toilet bowl to be lifted or adjusted when doing maintenance work. The distance also allows for any toilet seats, hangers, and other fixtures to be easily attached.

Additionally, it also provides enough room for the person using the toilet to sit comfortably while on the toilet.

What does 12 inch rough in mean when installing a toilet?

Rough-in is the distance from the wall behind the toilet to the center of the closet bolts, which secure the toilet to the floor. The standard rough-in for toilets is 12 inches, which is the distance from the wall behind the toilet to the center of the closet bolts.

When installing a toilet, you need to know the rough-in size in order to purchase the right size toilet. The most common and standard size for residential toilet rough-in is 12 inches, but some toilets have a 10- or 14-inch rough-in.

You’ll need to measure the distance from the wall behind the toilet to the center of the closet bolts before you purchase a toilet to make sure you get the right size.