The shortest toilet front to back is generally between 24 inches and 27 inches. Many toilets with a round bowl typically measure around 24 inches from the wall to the center of the bowl. For example, the American Standard Optimum Definity Right Height Elongated Toilet has a 24-inch front to back measurement from the wall to the farthest point of the bowl.
Other models with an elongated bowl can measure around 27 inches from the front of the bowl. However, for the most accurate measurement, you should check the owner’s manual for the exact measurements of the particular toilet you are looking to purchase.
How long is a toilet from front to back?
The average length of a toilet from its front to its back is roughly 28 to 31 inches. However, this measurement can vary based on the type of toilet and its installation. Some wall-mounted toilets may be shorter, while some round-bowl toilets may be longer.
Additionally, some toilets may have a larger projection than others, so it is important to measure the depth of the toilet before purchasing it to ensure it will work with the space you have available.
What is a shorter toilet called?
A shorter toilet is usually referred to as a Compact Toilet. Compact Toilets are perfect for small bathrooms since they are designed to be a smaller version of a standard toilet, but still maintain the same level of comfort and functionality.
Depending on the model, Compact Toilets may feature a slightly smaller bowl and seat size. This allows them to fit into tighter spaces, such as bathrooms with minimal storage or tight corners. They are also great for people looking to conserve water, as they typically use less water than a standard toilet.
Additionally, some models may also come with features such as a low profile or an ADA compliant bowl height, making them accessible for people with various physical needs.
What is the minimum distance in front of a toilet?
The minimum distance in front of a toilet should be 15” (38cm). This should allow enough room to move around the area when in use and provide enough space to move around the toilet when cleaning. Additionally, having enough force in front of the toilet helps prevent splashing, which can be more likely in a crowded space.
The minimum distance should also be far enough away from any other fixtures, such as a sink or other fixtures, to allow for maneuverability. Finally, when installing a toilet, be sure to take into consideration any obstacles that may be in the area and adjust the positioning of the toilet accordingly.
Do they make short toilets?
No, toilets typically come in one standard size. However, there are other options to consider if you have a bathroom with limited space. If you don’t have room for a full-size toilet, a wall mounted toilet may be a great alternative.
Wall mounted toilets don’t take up any floor space and are usually shallow, allowing for more space around the toilet. Some models of wall mounted toilets are very short in nature, usually being around 12-15 inches in depth.
Another option for tight spaces is a corner toilet. These toilets are designed to fit in the corner of a smaller bathroom and are typically shorter than regular-size toilets, as they are designed to fit an angled wall.
There are also some toilets with a tankless design, which offer even more space-saving. So, while there aren’t any short toilets per se, smaller bathroom spaces can take advantage of a number of different options.
How do you move a toilet back a few inches?
Moving a toilet back a few inches is doable but not a particularly easy task. All of the connections need to be removed, including the water supply line, the wax seal and the bolts holding the toilet to the floor.
Also, it is important to remember that the toilet must sit level; if the position change will affect the toilet’s balance, an extra shim may need to be used.
To start, it is important to shut off the water valve located on the wall or floor before disconnecting the water line from the tank. After the water supply line is disconnected, the wax seal can be broken using a flathead screwdriver or putty knife.
Then, the toilet needs to be given a gentle “rocking” motion to loosen it from the floor. There should be nuts or bolts on either side of the toilet at the floor connection — these will need to be removed once the toilet is loose.
Next, the toilet needs to be shifted, or slid, back to its new position, taking care not to damage the floor as you do so. Once the toilet is in its new spot, the water supply line should be connected, ensuring that it is secure and tight.
The wax seal may be reused if it is still in good condition, otherwise a new seal will need to be placed. Finally, the nuts or bolts may need to be tightened to ensure the toilet is securely in place, and the job is done.
Are all toilets 12 inches from wall?
No, not all toilets are 12 inches from the wall. Toilet dimensions can vary depending on the model and manufacturer. Generally, the average toilet bowl will stand 12 inches from the wall, however models such as “sanitary tubs” or corner toilets can be slightly less or more than 12 inches from the wall.
Additionally, toilets vary in size from 15 inches from the wall up to 20 or more inches. Therefore, it is important to check the measurements of the particular toilet before installing it in order to ensure maximum comfort for the user.
What does 12 inch rough-in mean when installing a toilet?
When installing a toilet, a 12 inch rough-in means that the distance from the wall behind the toilet to the center of the wall drain, or the drainage pipe, is 12 inches. This is typically the standard rough-in size, but may vary slightly depending on the manufacturer of the toilet and the type of wall construction.
To help determine the rough-in size the bathroom, you can measure the existing toilet, or check the installation guide that came with your new toilet. Most two-piece toilets have the same 12 inch rough-in, but one-piece toilets may have a 10 inch or 14 inch rough-in.
If the rough-in size of the existing toilet is different than the size of the new toilet, you may need to install a closet flange extender or make adjustments to the existing plumbing. If you plan to install a new toilet, it is important to make sure that the rough-in size is correct.
How far is a toilet supposed to be from the back wall?
The distance of the toilet from the back wall depends on the type of toilet you are installing, as well as the size of the space. Generally speaking, a round bowl toilet should have 12 inches of space between it and the back wall, while an elongated bowl toilet should have 14 inches of space.
It’s important to measure the space you have available before purchasing a new toilet to ensure you have the right dimensions to work with. Additionally, it’s important to follow all the guidelines indicated in the installation instructions of your new toilet to ensure that it is installed correctly and safely.
What are the dimensions of a toilet?
The dimensions of a toilet vary depending on the type of toilet you have and the configuration of your bathroom. A standard, or classic, toilet’s dimensions are roughly 30″ in length, 15″ in width, and 28.
5″ for its height. This configuration is for a one-piece toilet, which refers to the tank and bowl being one cohesive unit.
For a two-piece toilet, where the toilet bowl and tank are separate units, the dimensions are slightly different. The length of a two-piece toilet is roughly 29”, the width is roughly 15”, and the height is about 31”.
This slightly taller height of a two-piece toilet is due to the gap between the toilet bowl and tank.
The placement of the toilet in the bathroom, as well as its brand and model, will play a factor in the dimensions. Additionally, walls and other design elements in the bathroom may also cause slight fluctuations in the toilet’s dimensions.
So it is important to check if your specific toilet has any unique dimensions.
Do all toilets sit the same distance from the wall?
No, not all toilets sit the same distance from the wall. Toilet placement depends on the style of the toilet and the distance of the rough-in. Rough-in is the distance from the wall behind the toilet to the center of the drainpipe.
A standard rough-in measures 12 inches, but closer rough-ins of 10 or 14 inches are also common. Toilets with closer rough-ins are intended to be placed closer to the wall, typically with about 6 inches of space between the back of the toilet and the wall for cleaning.
Toilets with standard and longer rough-ins are designed to be used farther from the wall, so that the full length of the bowl and tank can be seen. Tankless toilets, which have the tank housed in the wall, will generally sit the closest to the wall.
Wall hung toilets do not have a tank, and are considered the most space-efficient option, since they sit directly on the wall.
Does rough in have to be exact?
No, rough in does not have to be exact. “Rough-in” is the term for the early stages of electrical work. It involves running wires behind walls for background lighting, outlets, and hardwired electrical items.
This generally needs to be done before the drywall is installed. The goal of rough-in is to provide an accurate roadmap of the wiring path so that electrical components can be connected during the finish phase.
This wiring is often placed as close as possible to where it will ultimately be installed. However, it is common for the wiring to be slightly off the ideal path because of spacing restrictions and other unforeseen roadblocks.
During the finish phase, electricians will work with what they have and make adjustments to match the ideal setup. As long as the wiring is safe and the final result works properly, rough-in doesn’t have to be exact.
How much space should be in front of a toilet in relation to a wall fixture or door?
Generally, there should be a minimum of 15-20 inches of clearance space in front of the toilet in relation to a wall fixture or door. This is to ensure that there is enough space for the user to comfortably stand and maneuver when using the toilet.
It should also take into account any space needed for toilet accessories (e. g. a toilet paper holder) or other obstructions that may be in the way. Additionally, it is important to consider any potential unique toilet configurations such as raised toilets, wall-mounted toilets, corner toilets and tankless toilets, all of which may require extra clearance.
Finally, it is best practice to leave at least 24 inches in front of a toilet to meet the accessibility requirements of individuals using a walker or wheelchair.
How much room do you need in front of a toilet in MM?
The general rule for the amount of space you need in front of a toilet is a minimum of 760mm (or 76cm), though some guidelines recommend having a minimum of 870mm (87cm). The exact amount of space needed will depend on the size of the toilet, the size and shape of the room, and other factors such as any auxiliary items (bidet, washing machine, etc).
For example, if a bidet is needed in the bathroom then you may need to have a larger space in front of the toilet to accommodate both the main toilet as well as the bidet. It is important to have enough space to enable users to move around the toilet comfortably and for any additional items.
Furthermore, it is also recommended to leave a minimum distance of 250mm behind the toilet and 300mm from the side walls, to ensure the toilet is easily accessed from all angles.
How far away from a wall should a toilet be installed?
Generally, a toilet should be installed at least 12 inches away from the wall in order to allow for adequate space for cleaning and maneuvering around the toilet when necessary. Having a close distance between the toilet and the wall can result in placement issues and make it difficult to access plumbing and electrical facilities.
It’s also a good idea to make sure that the room has enough space for the toilet and other amenities. Additionally, consider the size of potential occupants as some people may need additional space when using the toilet.
If the toilet is placed too close to the wall, it may prevent people from having comfortable access.