The standard depth of an under counter fridge is typically around 60cm (23. 6 inches), but the actual measurements can vary depending on the width and type of the fridge. For example, a standard under counter fridge may be wider than long and therefore measure 85cm (33inches) wide with a depth of 55cm (21.
7 inches). On the other hand, a smaller mini fridge or wine cooler might measure just 35cm (13. 8 inches) wide but with a depth of 55 cm (21. 7 inches). It is best to measure the exact space in your kitchen before you decide on the type of under counter fridge you would like, to make sure that it fits your needs.
How deep is an under counter fridge?
The depth of an under counter fridge can vary, depending on the type of fridge and the specific model. Generally, an under counter fridge will usually have a depth of between 18 and 24 inches. However, counter depth fridges tend to have a shallower depth, usually between 24 and 27 inches.
This can make them more suitable for fitting into tighter spaces. Some compact fridges may have depths as shallow as 15 inches.
Are under counter fridges standard size?
No, under counter fridges are not standard size. There are a range of size options available depending on the manufacturer. The smallest size of under counter fridge is typically around 18 inches in width and 26 inches in height, while the largest can reach up to a full width of 48 inches and a height of nearly 80 inches.
It is important to measure the space you have in your kitchen before buying an under counter fridge, as there can be a large range in sizes and some may not be suitable for the size of the area you have available.
Additionally, when looking for an under counter fridge, you may want to consider the type of shelves and drawers that come with the fridge to ensure that you can fit in all the items you plan to store inside.
What size is standard depth refrigerator?
The standard depth for a standard-sized refrigerator is approximately 28 inches from the wall to the front of the door. This is the standard depth for most freestanding and built-in refrigerators. Some models may be slightly shallower or deeper depending on specific requirements, but 28 inches is the most common refrigerator depth.
A refrigerator with a shallower depth of 22 to 24 inches is typically considered a counter-depth refrigerator. These are placed flush with surrounding counters creating an integrated look. These refrigerators can also be useful in kitchens with limited space, as they require less room to open their doors.
However, they can be more expensive than standard-depth models and have limited interior storage.
Is it worth it to get counter-depth fridge?
It can be worth it to get a counter-depth fridge depending on your needs. A counter-depth fridge offers a sleeker and more built-in look, as the refrigerator is exactly the same depth as your counters.
This type of refrigerator is ideal for smaller living spaces and can save you up to 4-6 inches of extra space.
Counter-depth refrigerators also offer improved energy efficiency, as they typically don’t require extra ventilation to cool the compressor. Additionally, the built-in look of these fridges can make a kitchen look more modern and aesthetically pleasing, which be a great benefit if you’re looking to update your kitchen.
However, this type of fridge may not be worth the cost if you need a larger, more versatile refrigerator. Most counter-depth refrigerators are around 24 inches in width, which may not accommodate all of your food storage needs.
Additionally, counter-depth models tend to have fewer custom features such as ice makers, temperature settings, and doors, which may negate the aesthetic benefits.
Overall, it is worth it to get a counter-depth fridge if you have a smaller living space and are looking for an aesthetically-pleasing, energy-efficient refrigerator. However, if you need a larger fridge or specific features, it may be best to stick with a standard refrigerator.
Do I want a counter-depth refrigerator?
Deciding whether or not to invest in a counter-depth refrigerator is a personal preference that depends upon the size and layout of your kitchen. Counter-depth refrigerators offer a sleek, built-in look that is becoming increasingly popular, by fitting flush to the counters in most kitchens.
However, as counter-depth models typically range from 21 to 24 inches deep, these models do not offer as much storage as a traditional refrigerator, which ranges from 24 to 36 inches deep.
If you plan to use a counter-depth refrigerator as your only unit, you may want to consider the amount of space available and aim for the highest cubic footage in that size range so the refrigerator can work on its own for your family’s needs.
However, if you have a small kitchen with limited space, a counter-depth unit may be the best choice as it saves floor and counter space.
Consider weighing your storage needs and aesthetic preferences against the size of your kitchen. If you have the space and plan to invest in another refrigerator, your traditional, larger model could work best according to your storage needs.
But if you like the look and feel of a counter-depth refrigerator, despite the storage sacrifice, it could be the right choice for your kitchen.
Which is better counter-depth or standard refrigerator?
It really depends on personal preference, lifestyle and space restrictions. Counter-depth refrigerators are typically shallower than standard ones, with their outer edge generally lining up with the edge of other kitchen cabinets, making them appear more unified and built-in.
Counter-depth refrigerators generally offer less storage space than standard ones and can be more expensive.
Standard refrigerators offer more storage space with taller, wider door designs that are less likely to require bending to see and reach items. They also tend to be less expensive than counter-depth versions.
Compared to counter-depth refrigerators, they jut further into the room, which means they will not line up with the edge of surrounding cabinets and the look will not be as integrated.
The choice of a counter-depth or standard refrigerator really comes down to personal preference, lifestyle and space restrictions. If you’re looking for a more unified look with fewer appliance edges, then a counter-depth refrigerator would be the better option.
However, if you’re looking for more storage space, then a standard refrigerator would be the better choice.
Do you lose a lot of space with a counter-depth fridge?
Counter-depth refrigerators typically have a shallower depth than standard-depth refrigerators, which means they take up less space in your kitchen. However, while counter-depth refrigerators are great for saving floor space in your kitchen, you do sacrifice a bit of space in terms of total storage.
Counter-depth refrigerators typically offer slightly less total storage space than standard-depth refrigerators, but they often come with a bonus storage compartment—the increased depth between the door and the counter.
This area can be great for storing condiments, snacks, and other smaller items. Additionally, counter-depth refrigerators often come with a shallower freezer compartment, which may limit some of your storage options.
So, while you do lose some storage space with a counter-depth refrigerator, you gain the benefits of taking up less floor space and having more usable countertop space.
Is counter-depth fridge really counter-depth?
No, a counter-depth refrigerator is not actually counter-depth. Although these fridges are made to look flush with the counters, they are often slightly deeper than a standard counter. Counter-depth refrigerators typically range in size from 22 to 28 inches in depth, whereas typical counters are roughly 24 inches deep.
This design helps the refrigerator appear more integrated into its surroundings, while still providing enough storage space. Some models are even designed with adjustable or expandable features to increase the usable space within the refrigerator even further.
Why are counter-depth fridges so expensive?
Counter-depth refrigerators are often more expensive than standard-depth models because they require more specialized engineering and sophisticated production processes. Counter-depth fridges have shallower dimensions than standard-depth models, so their inner components, such as the compressor and evaporator, must be modified and precise cuts made to fit the smaller confines of the fridge.
Additionally, because the walls of the fridge are shallower, more insulation is needed to retain cold air and keep contents at their optimum temperature, making them pricier than standard-depth models.
Due to the time and effort required for modifications, counter-depth refrigerators tend to be more expensive than their standard-depth counterparts.