Skip to Content

What is the standard size of a bathroom stall?

The standard size of a single bathroom stall typically varies depending on its location, with residential bathrooms generally being smaller than those found in commercial and public bathrooms. In general, the standard size of a single bathroom stall ranges from 32 to 50 inches in width and 40 to 66 inches in depth.

As a rule of thumb, it is best to leave a minimum of 36 inches of clear space between bathroom stall walls and 18 inches in front of urinals and toilet bowls. Doorways for a standard bathroom stall should be around 20 or 24 inches in width.

How tall are most bathroom stalls?

Most bathroom stalls are about 6 feet high for privacy purposes, although this can vary depending on which type of stall you purchase. Standard privacy stalls tend to measure 72-78 inches from the finished floor to the top of the partition, though there are also taller (80-84 inches) and shorter (60-66 inches) options available.

When planning for a commercial bathroom, it is important to measure the space you have and select the appropriate size for your needs.

The height of the stall door may also vary. Many commercial stalls come with a standard door height of either 48 or 54 inches, although taller options may also be available. Some stalls come with standard doors, while others offer sliding or hinged doors for added convenience.

Specialty stalls may even have no door at all, but instead feature a privacy curtain or panel.

No matter the type of stall you choose, providing users with adequate privacy is key. By understanding your space limitations and selecting the appropriate height of stall, you can ensure its users find a comfortable and private place to do their business.

Are most toilets 12 inches from wall?

The majority of toilets are installed with a 12 inch rough-in, which is the distance from the toilet centerline at the wall behind the toilet. However, this is not always the case. Offset toilet designs, which sit slightly irregularly, may be installed with a 10 or 14 inch rough-in, while low-flow toilets may be installed with a 9 inch rough-in.

Additionally, the distance from the wall to the toilet may be different than the rough-in due to the added length of the supply line, the size of the toilet flange, or the toilet design itself. It is best to measure the distance from the wall to the centerline of the toilet to determine the rough-in size if it is not immediately known.

Can you have a 5×7 bathroom?

Yes, it is possible to have a 5×7 bathroom. When planning a bathroom of this size, it is important to make sure that you plan the space carefully and select materials that help save on the amount of space taken up by the fixtures.

When designing a 5×7 bathroom, one good option is to opt for a corner shower. This can help reduce the amount of floor space taken up by a shower, while still allowing plenty of room for other elements of the bathroom.

Additionally, wall-mounted toilets can be installed to further save on floor space and make the most of the space available. Lastly, choosing smaller fixtures, such as a pedestal sink and off-the-floor vanity can also help give the bathroom the space it needs without taking up too much of the room.

Why are bathroom stalls so short?

Bathroom stalls are typically much shorter than standard doors, typically ranging from four to six feet tall. The primary reason behind this is to create a sense of privacy and security for the user.

Since bathroom stalls are typically compact and relatively cramped spaces, reducing the length of the walls allows for more space in the stall itself and a greater feeling of privacy and security. Additionally, shorter stalls are easier to install and help reduce the overall cost of the installation.

From a practical standpoint, shorter stalls also make them easier to use and access, especially for children and people with disabilities. Finally, shorter stalls can also help create an overall sense of privacy, as they ensure that individuals can’t peer into the stall or view the user’s feet or lower body.

Is 2 feet enough room for a toilet?

No, two feet is not enough room for a toilet. Toilets require a minimum of 30 inches of clearance in front of the toilet and 15 inches of clearance on each side, for a total of 60 inches for a comfortable fit in the bathroom.

Additionally, you’ll need extra room for the toilet tank, which is typically about 12-18 inches wide. Therefore, for an appropriate fitting toilet, you would need at least 74 inches of space.

Is 5 feet wide enough for a bathroom?

Whether five feet is wide enough for a bathroom depends on a few factors. If it is a secondary bathroom, it may be reasonable to assume that it is a small space, so a width of five feet may be fine. However, if the bathroom is a main bathroom, or serves multiple people or functions regularly, five feet may be too narrow.

It may be difficult to install a shower, bathtub, toilet and vanity with adequate space for maneuvering, so a larger width may be better suited. Additionally, if the bathroom includes items such as a storage cabinet, towel storage, or a makeup area, five feet could be too narrow for them to fit comfortably, so it would be best to opt for a wider bathroom if that is the case.

Ultimately, five feet may be enough but review the space carefully to determine the requirements for each item first.

Can a bathroom be 5×5?

Yes, a bathroom can be 5×5. Many bathrooms are this size and, depending on the layout and design, can accommodate the essential features of a bathroom. A 5×5 bathroom typically contains a toilet, sink, and shower or bathtub.

It would be a tight fit, so careful consideration of the layout and efficient storage solutions, like a shower caddy, will be necessary. To make the most of the space, consider smaller fixtures like a corner sink, wall-mounted toilet, and corner shower.

The right tiles, floorplan and fixtures can create the optical illusion of a larger space. Additional features like shelves, wall cubbies, and cabinets can be added to further optimize the space. Finally, it is important that your bath is well-ventilated, so an exhaust fan or window and skylights will likely be needed.

What are common heights for bathroom vanities?

The height of your bathroom vanity is largely dependent on individual preference. However, the average height usually falls between 30-36 inches. A vanity that is 30-36 inches high is typically the most comfortable for most people.

The countertop should be about 6-8 inches tall and the sink about 6-8 inches deep. For individuals who are taller than average, a higher vanity may be better, around 36-42 inches. Be sure to also consider the other bathroom fixtures when picking out your vanity height.

The height should work with the other fixtures and be comfortable to use. Lastly, if you’re putting in a double vanity, the two should be the same height.

What are the 2 heights of toilets?

The two common heights for toilets are the standard height model, which measures about 14-15 inches from the floor to the top of the toilet seat, and the comfort height model, which is usually about 17-19 inches from the floor to the top of the toilet seat.

Standard height toilets are typically less expensive and are the most common type of toilet. Comfort height toilets are a great choice for taller individuals or those with mobility challenges, as they make sitting down and standing up easier.

Why do public bathroom stalls have gaps?

Public bathroom stalls often have gaps between them because they are designed to provide privacy while still allowing people to be comfortable and safe. Having gaps between stalls prevents people from feeling claustrophobic and allows for ventilation within the bathroom.

With gaps an individual’s visibility around the bathroom stalls is also limited, allowing for people to feel a sense of privacy and security. Additionally, the gaps between stalls allow for staff to easily observe the area and ensure that people are acting properly, without infringing upon anyone’s privacy.

These gaps can also be helpful to disabled individuals who may need assistance using the stalls. By having spaces between stalls it is easier for staff or service animals to help them while guaranteeing the user’s privacy.

Overall, public bathroom stalls are designed with gaps in order to give people both privacy and safety while using them.

How big is an average public toilet?

The size of an average public toilet varies depending on the type of premises it is located in. Generally, a public toilet is smaller than a typical residential or commercial toilet, as public areas often need to fit several toilets into a limited amount of space.

A standard single public toilet is typically 36 inches wide by 48 inches high and contains one toilet bowl and sink, although some designs may include a small urinal, as well. This size is considered to be the minimum amount of space necessary to comfortably fit and use a toilet.

When multiple public toilets are grouped together in a public restroom, the size and shape of the space can vary depending on the layout. Generally, multiple public toilets are spaced out in a rectangle or square formation with a walkway in the center for visitors to access the stalls.

Generally, the space for smaller groups will be about 48 inches by 96 inches and for larger groups, it could be as large as 72 inches by 144 inches. These larger spaces will also usually include additional items, such as hand dryers, handicap-accessible toilets and other amenities.

What is code for distance around a toilet?

The code for the distance around a toilet required by building regulations varies by jurisdiction and the type of toilet being installed. Generally speaking, a 36 inch (900 mm) clearance is required all around the toilet, but in certain circumstances code requires a 42 inch (1067 mm) clearance.

This is usually the case when fixtures such as a shower, sink or bidet are installed within the same bathroom. Additionally, when installing a toilet against a wall, the appropriate distance from the centerline of the fixture must also be considered.

Specifically, the dimensions from the toilet’s centerline to the nearest wall should generally be at least 12 inches (300 mm).

In certain cases, building and plumbing codes may require a minimum of 15 inches (380 mm). Accessible toilets have even more stringent requirements and must be located in a clear space with a minimum of 48 inches (1200 mm) in front and an unobstructed side clearance of 56 inches (1420 mm).

This allows for wheelchair access and adequate floor space for users. It is important to check the specific requirements appropriate to the area in which the work is being done to ensure that all codes are being met.

How far from wall does toilet stick out?

The distance a toilet sticks out from the wall depends on the size, shape, and type of toilet you have. Standard toilets, otherwise known as “conventional flange” toilets, typically stick out from the wall by 28-30 inches.

Wall-mounted toilets have the most minimal design and tend to stick out from the wall by 12-15 inches. Compactly-designed or “corner” toilets often range from 21 to 25 inches from the wall depending on their depth and size.

Comfort-height or “Canada height” toilets may extend even further, ranging from 30-32 inches from the wall. Additionally, your existing plumbing may limit how far your toilet can stick out from the wall.

To determine the exact dimensions for your toilet, you should consult the model’s product specifications or a plumbing or contracting professional.

How many square feet is a public restroom?

The square footage of a public restroom can vary greatly depending on the size of the public space and the number of individuals that are expected to use it at any given time. Generally speaking, a single restroom stall will occupy around 8 square feet (including any surrounding area needed to access the stall), while a small bathroom designed for a few users may measure around 25-50 square feet.

For larger bathrooms designed to accommodate more people, such as those found in a shopping mall or other public space, the area can range from 150-200 square feet or even more. If the restroom will include showers and/or a changing area, even more space may be needed.