When choosing a toilet for a small bathroom, it is important to consider size, style, and water efficiency. For a very small bathroom, a corner toilet is an ideal option as they are space efficient while providing the necessary plumbing access.
If you’re looking for a more contemporary look, a wall mounted toilet can work well in small spaces, as the plumbing and tank are mounted behind the wall and out of sight. To maintain a compact presence, choose a smaller toilet bowl and dual-flush option.
With dual-flush technology, you can decide how much water to use for each flush. If you’re opting for a taller toilet, it may offer more comfort, but may take up more space. In addition, look for toilets with a WaterSense label from the Environmental Protection Agency, as this indicates that the toilet uses 20% less water per flush than standard models.
With careful consideration of size, style and efficiency, you can find the ideal toilet for your small bathroom.
Why would I want an elongated toilet bowl?
An elongated toilet bowl is great for achieving a more comfortable bathroom experience. An elongated bowl is typically two to three inches longer than standard round bowls, giving you a greater seating area and thus a more comfortable feel when sitting.
They are also perfect for bathroom remodeling projects, as they fit into tighter spaces and provide a more sophisticated look than a standard round toilet. Moreover, the elongated shape keeps water in the bowl longer, which results in fewer toilet flush issues.
Additionally, an elongated bowl is a great choice for taller people or individuals with limited flexibility, as it makes it easier for them to sit and rise without difficulty. Ultimately, an elongated toilet bowl is an excellent choice for anyone looking for improved comfort and convenience.
How do I decide what toilet to buy?
Deciding which toilet to buy is a big decision, so it’s important to do your research to ensure you select the right one for your needs. The key factors to consider when deciding on a toilet include price, style, water efficiency and performance.
Price is an important factor, and you’ll likely want to select a toilet that fits within your budget. If you can, it’s usually best to splurge a bit on quality, as this will ensure that it runs smoothly without any problems.
Style can also be an important factor in the decision-making process, as you’ll want to pick a toilet that matches your bathroom decor. There are a wide variety of styles to choose from, ranging from basic and traditional to modern and sophisticated.
Water efficiency is a major factor, and selecting a toilet that uses less water can help not only save money on your utility bills, but can also help reduce your carbon footprint. Look for certifications from organizations like WaterSense, which can ensure that the toilet is highly efficient when it comes to water usage.
Finally, it’s important to consider the performance of the toilet. While it may be tempting to buy a toilet based solely on its price or style, it’s important to make sure it has a strong performance record that you can rely on.
If possible, check out reviews from other customers or research the specific model to ensure it is up to your standards.
What are the 3 types of toilet?
The three main types of toilets are gravity-fed, pressure-assisted, and flushometer.
Gravity-fed toilets are the most common type of toilet. They rely on gravity to move water through the bowl, which is why they produce a softer flush. They are the most affordable and can be found in most homes.
Pressure-assisted toilets use air pressure to force water into the bowl, creating a powerful, almost silent flush. These toilets are ideal for high-traffic areas where sound isn’t an issue, like hotels and restaurants.
They are more expensive than gravity-fed toilets and can be difficult to maintain.
Finally, flushometer toilets are the most powerful of the three types. They are activated by manually pushing a lever or button and flush with a higher water pressure. They are best for high-traffic areas, like schools and public restrooms, as well as commercial buildings.
They are usually the most expensive, but the most reliable option.
What is the most comfortable toilet shape?
The most comfortable toilet shape depends on the individual user, as everybody has different needs and preferences when it comes to using the toilet. Some people may prefer a round toilet as it fits more snugly into a compact bathroom space and is easier to clean and maintain.
Others may prefer a more elongated toilet which offers additional seating space and can provide more comfort when sitting down. Additionally, the angle of the toilet bowl can also be taken into account: a toilet that is slightly tilted forward, can provide comfort and help to reduce strain on the user’s lower back muscles.
Additionally, certain toilet models may feature specially designed sitting surfaces, such as contoured seats that follow the curvature of the body, which can also help to provide optimal comfort.
Is a taller or shorter toilet better?
Whether a taller or shorter toilet is better depends on individual needs and preferences. Taller toilets are generally easier to stand up from, which makes them a good choice for taller people or those with mobility issues.
Shorter toilets can also be a good choice, as they make it easier for shorter people or children to reach the toilet seat. Additionally, shorter toilets can make it easier for people to sit down and stand up, particularly if they are elderly or disabled.
Both taller and shorter toilets can be designed in ways that conserve water, so the water efficiency of the toilet should also be taken into consideration when making a decision. Ultimately, it is up to the individual to decide which toilet is best for them.
What is P type and S type toilet?
P type and S type toilets refer to the shape and size of the bowl, which is the basin located at the bottom of a toilet. A P type toilet is a squatting type toilet characterized by its bowl shape, which is round and wide.
This is most commonly found in Asian countries. On the other hand, an S type toilet features an elongated bowl. The design is typically taller and narrower than the P type toilet, which is more common in Western countries.
Both types of toilets have a flushing mechanism, but the S type toilet is said to flush more efficiently due to its shape. Ultimately, the choice between the two kinds of toilets depends on a person’s preference and the installation situation.
Which is better P-trap or S-trap toilet?
The choice between a P-trap and an S-trap toilet largely depends on the design of the piping system in the bathroom and the individual’s preference. Both can be equally effective and efficient in their functions, so the decision often comes down to practicality.
P-traps are typically used in modern bathrooms where a regular and symmetrical piping system is present. The P-trap is always lower than the fixtures, and it is able to collect the wastewater quickly and efficiently.
It requires about 6 to 8 inches of space between the wall of the bathroom and the trap.
On the other hand, an S-trap has been used in the past and is mainly preferred by those who have an uneven floor or a limited amount of space. The S-trap toilet sits higher than the trap, which means that some of the water can be trapped in the curve or ‘S’ shape of the pipe.
However, this type of trap should not be used in areas where the water level is subject to change, as it can cause back flow and other issues.
In short, it is best to look at the type of plumbing in the bathroom before choosing between a P-trap and an S-trap toilet. Take into consideration the amount of space available, the water level in the area, and any other factors that could impact the effectiveness of either one.
Ultimately, the choice can be a matter of individual preference.
Why is S-trap prohibited?
S-traps are no longer permitted in modern plumbing installations due to their potential for creating costly and hazardous sanitary risks. An S-trap is a type of plumbing fixture, such as a sink, tub, or toilet, that is designed to shape the horizontal piping so that it resembles the letter “S.
” This design creates a gap between the trap and the upper drainpipe leading to the vertical drainage and vent (stack) pipe. This gap allows odors and sewage gases to escape instead of being trapped in the fixture, and this can be hazardous for humans and animals exposed to the gas.
It also presents sanitation issues with the possibility of sewage backing up and spilling out of the S-trap. Finally, S-traps can reduce the effectiveness of the drainage system, which can lead to plumbing problems (such as clogs) and costly water damage.
For these reasons, S-traps are no longer allowed in most modern plumbing installations. Instead, plumbers typically use P-traps, which use curved pipe to keep the water in the horizontal part of the pipe—eliminating the risks that come with an S-trap.
What does P-trap stand for?
P-trap stands for “Primary trap”. P-traps are plumbing fixtures used for many different fixtures such as sinks, tubs, showers, and more. They are an L-shaped pipe that uses a U-shaped dip in the middle to trap water, preventing odor, steam, insects, and other materials from flowing back up and out.
The purpose of the P-trap is to prevent the sewer gas from entering the building while also allowing air to enter, making drainage faster and more efficient. The P-trap also helps support the plumbing system by preventing clogged drains.
The downward dip of the U-shape also prevents large debris from passing through and blocing the pipe.
Does P-trap prevent sewer smell?
Yes, a P-trap prevents sewer smell by utilizing a water seal that prevents methane and other odors from emanating through the drain pipe and entering your home. This trap is designed with an angle that causes water to fill the curved section of the pipe, creating a seal that blocks gases from passing through.
This seal is maintained by regularly running warm soapy water down the drain or running a small amount of water in the sink a few times a week. Additionally, if you believe that the water seal has dried out or the trap has filled with debris, it should be flushed regularly with water and cleanser.
Can I put an elongated toilet in a small bathroom?
Yes, you can put an elongated toilet in a small bathroom. However, there are a few important considerations to keep in mind if you choose to do so. Firstly, you’ll need to make sure that the extra length of the elongated toilet won’t cause any issues with the bathroom layout, such as blocking access to other fixtures or creating an uneven look.
Secondly, bear in mind that using an elongated toilet in a small bathroom can often make the space feel even smaller as the extra length of the bowl takes up more valuable floor space. Finally, you’ll need to also think about the type of toilet you choose, as certain modern designs can help counteract this issue by being much slimmer than traditional elongated models.
With some careful planning and consideration, however, an elongated toilet can work well in a small bathroom.
Do elongated toilets take up more space?
Yes, elongated toilets take up more space than round toilets. In general, an elongated toilet requires more clearance space than a round toilet due to its extended shape. The increased size adds 2-3 inches of additional clearance space when compared with a round toilet.
The elongated toilet shape offers a much more comfortable, ergonomic seating position for the user and may even help to save space in a smaller bathroom due to its more efficient use of the overall space.
However, it does take up more total space in the bathroom than a round toilet. Additionally, it is important to note that the usage of a toilet seat specifically designed for elongated toilets must be used in order to get the most out of the elongated shape.
How much space do you need for an elongated toilet?
On average, most elongated toilets require a minimum space area that measures 30 to 32 inches from the center of the toilet drain to the wall behind and at least 18 inches from the center of the toilet drain to the side wall.
The space between the toilet and the wall should also be at least 15 inches. Depending on the toilet model, a few extra inches may be needed for supplies such as the flush handle. Therefore, it is recommended that you measure the total space you have available before purchasing an elongated toilet.
Can I replace round toilet with elongated?
Yes, it is possible to replace a round toilet with an elongated one. However, you need to take into consideration the amount of space you have available since elongated toilets typically require more space due to their oval shape.
Furthermore, you need to make sure that all of your existing plumbing is compatible with the new elongated toilet. If all of the existing plumbing is not properly recalibrated, you may experience leakage or other related issues.
Additionally, you need to ensure that the new toilet is compliant with any code requirements in your area. If all of these requirements are met, replacing a round toilet with an elongated one should be an easy process.