Replacing a toilet requires a few basic items and measurements. You will need a new toilet, wax ring, toilet bolts, pliers, an adjustable wrench, putty knife and screwdriver.
The first measurement is the distance between the drain bolt holes and the wall. This is typically 12” apart center on center. The second measurement is the length of the toilet, usually around 16 ½ to 17 inches.
The third measurement is the bolt size. Most toilets require one-inch bolts.
Once these measurements are taken, you can purchase the appropriate parts. When replacing the toilet, you will need to disconnect the water supply line and remove the old toilet by unscrewing the bolts anchored in the floor.
Then the old wax ring should be carefully removed from the drainpipe flange. Replace it with the new wax ring, pressing firmly down all the way around to ensure a tight seal.
Next, you should align the toilet over the flange and bolt holes, inserting the new bolts into the base of the toilet. Then press the toilet down to create a tight seal against the wax ring. Securely tighten down the bolts with the adjustable wrench, reconnect the water line, and adjust its tightness with the pliers.
Finally, use putty knife or a screwdriver to make sure all the edges are sealed with caulk.
With the right tools and measurements, replacing a toilet should be a smooth and efficient process.
How do you measure for a toilet bowl replacement?
Measuring for a toilet bowl replacement is an important step in ensuring that you purchase the right size. When replacing the bowl, it is important to measure both the length from the wall to the toilet bolts, as well as the width from side to side.
To begin, measure from the wall to the back of the toilet bolts. If a plastic, shim or wooden spacer is present, measure from the wall up to your spacer and add the thickness of the spacer to your measurement, since the bowl will mount directly to the wall.
After measuring the length from the wall, measure the width across the back of the bowl from side to side. It is important to make sure the new bowl will fit within the allotted space. The two measurements should be recorded and used when shopping for a replacement toilet bowl.
How do you measure toilet rough-in for existing toilet?
Measuring the rough-in for an existing toilet is fairly straightforward, but it is important to measure accurately and follow the instructions that came with your new toilet. To begin, you will want to measure the distance from the wall to the center of the drain hole in the toilet.
To do this, you will need a measuring tape, and a straight edge such as a level to ensure you measure accurately. Take your level and place it at the back of the toilet, up against the wall, and measure from the wall to the center of the drain hole.
Note the measurement, usually which is 12 inches on most standard toilets. The rough-in measurement, which is the distance from the wall to the center of the toilet, should be the same, so measure that in the same fashion.
Once you have both measurements, write them down and refer them to the instructions of your new toilet for proper installation.
How do I know if I need a 10 or 12 rough in toilet?
In order to determine which rough in size you need (either 10 or 12 inches), you must first measure the distance between the wall behind your toilet and the bolt caps on the floor at the base of the toilet.
Generally, a 10” rough in size toilet is used in most residential bathrooms, but a 12” rough in size is sometimes needed in more spacious bathrooms. If the distance measures more than 10 inches, then you will need a 12 rough in toilet.
It is important to double-check your measurements to ensure that you purchase the correct size. Additionally, you should be mindful of any changes or adjustments you plan to make in the future before purchasing your toilet, as the rough in size of your toilet must match the size of other plumbing fixtures in the area.
How do you tell if your toilet is a 10 in or 12 in rough in?
To determine if your toilet is a 10 in or 12 in rough-in, you need to measure the distance from the wall behind the toilet to the center of the waste pipe. Toilets are typically found in either 10 in or 12 in rough-in sizes.
If you measure the distance to the center of the waste pipe and it is 10 inches, then you have a 10 inch rough-in toilet. On the other hand, if your measurement is 12 inches, then you have a 12 inch rough in toilet.
If you’re unsure of the exact size of your toilet, you can also measure from the center of the closet flange bolts to the wall. This measurement should also be the same length (10 inches or 12 inches) as the rough-in size stated on the toilet.
What size rough-in toilet do I need?
The rough-in size of a toilet generally refers to the distance between the wall behind the toilet and the centerline of the drain, usually indicated in inches. The most common sizes are 10”, 12”, and 14”.
To determine which size you need, it is important to measure from the back wall to the center of the drain. If the measurement is not either 10”, 12”, or 14”, then it is necessary to first use wall anchors and frame out the wall for the larger size before purchasing a toilet.
Additionally, if your space does not allow for a standard size, you can order what is known as a universal flushometer valve toilet, which will accommodate any rough-in size. Lastly, some toilets also come with an adjustable valve that can move the outlet of the bowl between 6” and 7” to match different rough-in sizes.
What does 12 inch rough-in mean when installing a toilet?
A 12 inch rough-in when installing a toilet refers to the distance from the wall behind the toilet to the center of the closet bolts that secure the toilet to the floor. When purchasing a toilet, you will need to know the rough-in measurement for your bathroom in order to ensure that the toilet you purchase fits the correct distance from the wall.
A standard rough-in measurement for a toilet is 12 inches, although toilets can be found with different rough-in measurements ranging from 10. 5 up to 14 inches. It is important to measure the rough-in before purchasing a toilet in order to ensure the correct fit.
It is important to remember that if you buy a toilet with a larger rough-in than the measure of your bathroom, it will not fit correctly, and you will need to purchase a toilet with a 12 inch rough-in.
How do I know if my toilet is 2 or 3 inches?
The best way to determine if your toilet is 2 or 3 inches is to measure the “rough in” of your toilet. The rough in refers to the distance between the wall behind the toilet and the center of the waste pipe that connects to the toilet.
To measure the rough in, first locate the waster pipe that attaches to the back of the toilet. To do this, you will likely need to remove the tank lid and the two bolts that hold the tank to the bowl.
If you have an access panel, you can access the waste pipe from there. Once the tank is removed, you can measure from the back wall to the center of the waste pipe. If the distance measures 10 inches, then your toilet is a 3 inch.
If, on the other hand, the distance measures 12 inches, then you have a 2 inch toilet.
How much space do you need for a toilet rough-in?
Most toilet rough-ins require a minimum of 12 inches of clearance from a wall or other obstruction in front of the toilet. Additionally, a 12-inch clearance is typically required on either side of the center line of the drain.
This typically adds up to having a space of at least 24 inches in width – but it is important to double-check the measurements of the specific rough-in you are installing, as these measurements may vary slightly based on the model or brand of the toilet you are installing.
The clearance space may need to be a bit wider if there is an obstruction on either side of the rough-in, in order to fully accommodate the toilet. Additionally, the drain must be at least 15 inches from the finished wall in back of the toilet for most models, so that is something to consider when measuring your space as well.
Ultimately, ensure that the measurements of the space you have for your toilet rough-in meet the exact specifications to ensure a proper installation.
Should toilet flange be flush with floor?
Yes, it is important to ensure the toilet flange is flush with the floor. This is because a toilet flange is what connects the toilet to the drainpipe and helps keep the seal between the two components, which prevents water and waste from leaking.
If there is even a small gap between the flange and the floor, it can cause weak seals that allow water to leak. This can eventually damage the flooring and surrounding areas, leading to costly repairs.
To ensure a proper seal, it is important to make sure the flange is level and flush with the floor before installing a toilet.
How far off the wall does a toilet flange need to be?
The distance off the wall that a toilet flange needs to be depends on the type of wall surface used. If the wall is made of wood or drywall, then the flange should be placed between 1/4” and 1” off the wall.
For thicker walls such as concrete or cinder block, the flange should be installed at least 1” off the wall. In any case, it’s important to double-check the installation instructions for the specific type of flange being used to ensure the appropriate distance is used.
Additionally, it’s a good idea to wait until the toilet is installed prior to attaching and mounting the flange, so that the amount of space required and the specific placement can be adjusted accordingly.
How far does a toilet stick out from the wall?
The exact distance that a toilet sticks out from the wall will vary depending on the design and model of the toilet, as well as any other furniture or accessories that might be in the bathroom. Generally speaking, however, a toilet will stick out from the wall by around 18 to 20 inches.
Some one-piece toilets may protrude as far as 24 inches, and some corner toilets may be as shallow as 12 inches. When researching toilets for your bathroom renovation project, be sure to consider the depth of the toilet when measure the space to ensure a snug and secure fit.
What is code for distance around a toilet?
The code for the distance around a toilet is determined by a number of factors, including the type of installation, the space available in the bathroom, and the purpose for which the toilet is being used.
For standard toilet installations in residential homes, the minimum distance around the toilet should be at least 18 inches. For commercial toilet installations, such as in public facilities, the distance should be at least 24 inches to ensure ADA compliance.
If a toilet is being installed inside of a stall, the minimum distance should still be at least 18 inches, however if the stall is larger than 18 inches the distance can be greater. Additionally, if a floor mounted toilet is placed in front of a wall, the distance should be increased to at least 24 inches of clearance in order to properly adhere to building and plumbing codes.
When considering toilet placement, the location should also take into account the available space in the bathroom and any other furniture, fixtures, and plumbing that will be installed. Furthermore, if the toilet is being used to provide access to a sink, or in an area that requires a wheelchair or other mobility aid, the distance should be increased to at least 36 inches to ensure full accessibility.
Does toilet need to rest against wall?
Yes, toilets should typically be resting against a wall. This ensures that they are securely anchored, which helps prevent any potential accidents or leaks from occurring. The water and waste connections must also be properly secured in order to ensure the safety of the toilet and those using it.
Additionally, having the toilet against a wall helps create a more aesthetically pleasing look in a bathroom. Without any other obstructions, the toilet should have an even, clean appearance that fits in with the overall design of the space.
What is the smallest space for a toilet?
The smallest space for a toilet that meets the building codes is usually somewhere around 24″ by 30”. It is important to note, however, that the exact required distances may change according to the locale and authorities that have jurisdiction over the area.
That being said, even the smallest possible space is large enough to fit a toilet with the necessary clearance for both a user and any required safety features such as grab bars. Additionally, adequate space must be provided for the tank and seat as well as any toilet fixture accessories like a bidet.
It is important to make sure that there is enough space to provide a safe, comfortable, and easy to use experience.