Drop in tubs come in a variety of sizes, so there is no single answer to this question. Generally, drop in tubs are designed to accommodate a wide range of bathrooms, ranging from smaller powder rooms to larger master bathrooms.
Generally, the smallest drop in tubs are just over four feet and can comfortably seat one to two people. There are larger, 6-7 foot drop in tubs suited for two to three people, and even large, 8-10 foot tubs, which are suitable for up to four people.
Drop in tubs can also be customised, to fit the exact measurements of your bathroom.
What is the standard size of a soaker tub?
The standard size of a soaker tub can depend on the manufacturer, however most are usually between 48” and 66” long and 28” to 36” wide. Some soaker tubs even come with the option to customize the size.
If you have a larger bathroom area to work with you can opt for a larger soaker tub. Most soaker tubs come with a seating area to maximize comfort. The seats are usually between 15” and 20” high. The average capacity of a soaker tub is 35 to 40 gallons.
How much space is needed for a soaker tub?
The size of space needed for a soaker tub depends on the size of the soaker tub as well as the size of the bathroom. Most standard soaker tubs are between 6 and 8 feet in length, but can be up to 10 to 12 feet in length depending on the bathroom size.
When choosing the size of your soaker tub, it is important to make sure to factor in any added features like shower doors and other hardware the tub may require. Generally, the ideal clear space for a soaker tub is at least 4 feet in length plus the width of the tub from all sides, including the outside wall.
It’s also important to leave adequate room for the continuous flow of traffic around the tub, as well as space for a toilet and sink if required. When it doubt, it’s better to err on the side of caution and opt for a larger distance, as keeping the soaker tub from feeling too cramped will give you a more relaxing and enjoyable experience.
Are soaker tubs bigger than regular tubs?
Generally speaking, soaker tubs are larger than regular tubs. Soaker tubs are typically designed to fit two people, whereas regular tubs are designed to fit just one. Soaker tubs are also deeper than regular tubs, making them perfect for soaking.
They can also be used as more of a luxurious bathing experience than a regular tub, since they are so much more spacious. The only difference is that soaker tubs are typically made of different materials than regular tubs, making them more expensive.
So it really depends on your needs on the size and the material of the tub that you choose.
What are the different sizes of bathtubs?
The different sizes of bathtubs vary greatly, depending on the shape and style of the bathtub. For example, a claw foot tub typically measures 59″ long x 30″ wide, while a standard alcove or drop-in tub typically measures 60″ long x 32″ wide.
Additionally, bathtubs come in many different shapes such as rectangular, oval, square, and corner tubs. Depending on the size of the wall and bathroom space, you can choose the size and shape bathtub that best fits the area.
For instance, a corner tub is the perfect size and shape for small bathrooms, as it slides into a corner taking up minimal space.
Apart from shape and size, there are other design options available to consider as well. This includes the material the bathtub is made of either acrylic, fiberglass, or cast-iron. Additionally, bathtubs can be freestanding or built-in, depending on the overall look and feel of the bathroom.
Finally, if you are looking for a luxurious spa experience, a whirlpool tub with jets may be the perfect choice for you.
Can you put a soaker tub in a small bathroom?
Yes, it is possible to put a soaker tub in a small bathroom. The key is to choose the right size of tub and to make efficient use of the surrounding space. When selecting a soaker tub, it is important to consider its width, length, and placement in the room.
A small corner tub can help conserve space in a small bathroom, as well as a short tub, which is usually no more than 5 feet in length. When installing the tub, make sure it is away from any windows to avoid steam or condensation from collecting on them.
Additionally, it may be necessary to have additional lighting, such as recessed lighting or wall sconces, installed to brighten the room while using the tub. Finally, consider using mirrors and other wall-mounted décor to create the illusion of more space.
By following the right steps and maximizing use of the space in the bathroom, putting a soaker tub in a small bathroom is definitely possible.
Is soaker hose supposed to be buried?
No, soaker hoses are not meant to be buried. They should be placed flat on the ground in the area where the water is needed, such as around a garden or flowerbed. You can use landscape staples or something similar to secure them to the ground, if desired.
Alternatively, they can be placed on top of the soil, just make sure they lay flat so the water is fully dispersed. Connect the ends of your hose together with a regular garden hose and turn on your water.
The soaker hose will filter water through its pores, allowing the water to slowly penetrate the ground and deliver moisture with minimal runoff.
It’s also important to note that soaker hoses should not be buried under mulch or covered with soil. This will prevent the water from properly saturating the ground and the hose may become clogged.
Do they make bathtubs smaller than 60 inches?
Yes, bathtubs are available in a range of sizes, and some are even shorter than 60 inches. Depending on your installation and bathroom size, you can choose a bathtub that is anywhere from 36 inches to 72 inches in length.
If a 60 inch bathtub is too large for your space, there are several models that measure shorter which can be great options. Additionally, some bathtubs come with a removable panel, allowing you to shrink the bathtub size to fit in a smaller space.
Whichever size of bathtub you choose, it is important to get professional measurements of your bathroom so that you can determine the best size for your space.
How much area does a soaker hose cover?
The area that a soaker hose covers depends on the length of the hose and the water pressure. A 25-foot hose, for example, can cover up to 25 square feet of area if the water pressure is low, or up to 75 square feet of area if the water pressure is higher.
Generally speaking, soaker hoses work best when laid out in a meandering line, rather than in a straight line, which can minimize the amount of water wasted while maximizing the area of coverage. The total area covered will also depend on the size of the nozzle used.
A larger, 1/2″ nozzle will cover more area than a small, 1/4″ nozzle. Additionally, the distance between the hose and the plants should also taken into consideration; a wider space can result in a greater area of coverage.
How much clearance do you need around a freestanding tub?
The National Kitchen and Bath Association (NKBA) recommends that you allow a minimum of 30 inches of space between the edge of the tub and the walls surrounding it. This allows the user to be able to access the tub from all directions.
However, to ensure an adequate amount of space, it is recommended that 36-48 inches of clearance is provided. If a shower curtain is used, you will need to factor in at least 12 inches of additional space.
It’s also important to leave at least 6-12 inches of space between the tub and any built in shelving, cabinets or fixtures. Additionally, the NKBA recommends allowing an extra 3 feet of space around the tub to allow for ease of movement and accessibility.
This should account for large items such as a shower curtain rod or other storage furniture. Finally, consider ground clearance as well; a minimum of 6 inches of clearance should be left for both cleaning and preventing water splatter from creating a dangerous slippage situation.
How far away should a soaker hose be?
The ideal distance to install a soaker hose varies depending on the area you’re irrigating and the type of soaker hose you’re using. Generally speaking, you want to place the soaker hose closely enough together to ensure uniform distribution of water across your garden or planting area.
For instance, a 5/8-inch soaker hose should be spaced about 18-24 inches apart, while a 1/2-inch hose should be spaced about 12-18 inches apart. If you’re irrigating a large area, you may have to utilize more hoses that are spaced further apart to ensure optimal coverage.
Please note that for spaces with different types of soils, it may be necessary to adjust the spacing accordingly. To achieve the best results, it is advised that you consult a professional before selecting and installing soaker hoses.
Can a freestanding tub be against a wall?
Yes, a freestanding tub can be against a wall. Many people enjoy the look of a freestanding tub against a wall, which can be an attractive feature in a bathroom. Before you install a freestanding tub, however, it’s important to make sure that your wall can adequately support the weight of the tub and the water it will contain.
The best way to do this is to check with an experienced contractor or builder, who can tell you if the wall is strong enough to safely hold a freestanding bathtub.
When installing a freestanding tub close to a wall, it’s also important to pick the right type of material for the tub. Solid stone tubs are usually the heaviest option, so be sure to inquire about the weight of any stone tub you’re considering.
Additionally, make sure there is adequate room between the tub’s drain and the wall, as this can affect the water flow and pressure. Finally, choose the right kind of sealant for the area where the tub meets the wall in order to prevent moisture and mildew buildup.
All of these considerations must be taken into account when planning to install a freestanding tub close to a wall.
Does flooring go under a freestanding tub?
Yes, flooring should go under a freestanding tub. This is because the flooring supports the tub, even if it is not anchored to the flooring. Installing flooring beneath the tub creates a more stable and level base for the tub, as well as adds insulation.
The flooring will also help to reduce any noise from water splashing inside the tub. When installing the flooring under the tub, use a waterproof membrane or a modified thinset between the floor and the bathtub.
This will help protect the flooring and make it easier to clean. In addition, use a level to make sure the bathtub is upright and plumb, as well as to verify the tub is level.
What keeps a freestanding tub from moving?
A freestanding tub typically has several components that help keep it in place. A primary measure is a stabilizing support system which almost always consists of a set of legs and a frame that encases the tub and provides extra stability.
Additionally, the tub is often secured to the floor or wall, either with a set of anchors or with a strong adhesive. The internal components of the tub can also provide support via a set of steel ribs that help hold the tub in place when water is added and the sides become more buoyant.
Finally, a specialized leveling kit can be used to make sure the tub is level, which further maintains the stability of the entire unit.
Does a free standing tub sit on tile?
A free standing tub can be installed on a variety of flooring surfaces, including tile. Tile is a popular option, as it is long-lasting and easy to clean. However, keep in mind that the weight of the tub – usually over 200lbs – will require the flooring underneath to be able to hold the extra load.
If you choose to install the free standing tub on tile, it is important to consult with a professional to make sure the tile is strong enough to support the weight of the tub. Additionally, the tile must be installed correctly and in some cases, may need an extra layer of support beneath it, such as a concrete board or reinforcement grid.
If the tile is not installed properly, the tub may become unbalanced and the tile may crack under the weight of the tub. Lastly, in order to properly connect and secure the free standing tub, you will need to use high-quality sealant, grout, and caulk, to ensure that water does not leak.