The size of the fridge that fits under-counter depends on the model, size, and capacity. Generally, the standard size refrigerator can fit in a space that has a minimum width of 30 inches and a minimum of 30 – 34 inches of height.
However, you may find that models that are sized and designed specifically to fit under-counter may even fit in a space as small as 24 inches in width and height. The capacities, however, typically range from 15 to 18 cubic feet, and may even come in a variety of models with features that may include door storage, drawers, and more.
However, when shopping, it’s important to be aware of the dimensions of the refrigerator itself and its clearance space, to ensure the refrigerator is a proper fit.
Are all under-counter integrated fridges the same size?
No, not all under-counter integrated fridges are the same size. Ranging from small countertop fridges to large full-sized units that can accommodate a lot of food. The size you choose will depend on the available space in your kitchen as well as your storage needs.
Generally, you’ll have a choice between a tall, slim model and a wide, oblong model. Additionally, you may be able to choose the height and depth of the appliance to accommodate your kitchen layout and the items you plan to store in it.
What is the standard depth of an under-counter fridge?
The standard depth of an under-counter fridge varies depending on the make and model. However, most under-counter fridges are between 24-31 inches deep without the door, and 24-34 inches deep with the door.
This measurement includes the door handle and small components, but excludes the hinges. Additionally, under-counter fridges can come with built-in draws and doors, which can increase their depth even further, up to as deep as 40-50 inches.
Therefore, it is necessary to take accurate measurements of your space before selecting a model. Most under-counter fridge freezer combos have slightly higher depths than fridges on their own.
Do under counter fridges need ventilation?
Yes, under counter fridges need ventilation in order to ensure they are running efficiently. Without proper ventilation, the refrigerator could overheat and breakdown prematurely, leading to costly repairs.
Proper ventilation also helps with performance, as inadequate air circulation can cause the fridge to work harder, leading to higher energy costs.
A rule of thumb is that the back of the fridge should have two to four inches of clearance from the wall, and sides should have one to two inches of clearance for adequate airflow. If your under counter fridge is near a kitchen appliance or a closet with a swinging door, make sure the door doesn’t block the ventilation.
Further, make sure you keep dust, dirt and lint from building up around your refrigerator.
In order to help keep your fridge running efficiently for years to come, you should routinely check that the coils are clean and dust-free. If your under counter fridge has a built-in fan, make sure it is operating properly.
These simple maintenance items can help keep your refrigerator from becoming hot, which can cause food spoilage and decreased performance.
Where should you not put a fridge?
You should not place a refrigerator in an area that is exposed to temperatures below 60°F, as this could damage the appliance, jeopardizing its proper functioning. In addition, the area should not be too hot and humid, since this could cause the motor and compressor to overwork and could also increase the temperature inside the refrigerator.
An ideal temperature for the space should be somewhere between 60°F and 90°F. Refrigerators should also be placed away from direct sunlight, stoves, radiators and other appliances that generate heat, as this could cause the condenser to overheat and damage the unit.
Additionally, the area should not be too small, as this could make it difficult for adequate ventilation.
Do you need clearance above a fridge?
When installing a refrigerator, it is important to ensure that you have the necessary clearance both above and around the fridge. Depending on the type of refrigerator, you may need to leave 3–6 inches of clearance behind the unit.
Typically, a minimum of 1 inch of clearance should be left above the top of the fridge to provide enough space for air to circulate. Keep in mind, certain types of refrigerators, such as those with ice makers, may require an additional 1-2 inches of clearance as they will have an inlet or water supply line.
You also want to leave at least 3 inches of clearance on both sides of the refrigerator. Additionally, you should ensure there is at least 4 inches of clearance between the top of the refrigerator and the bottom of any overhead cabinets or moldings.
Finally, if the refrigerator has doors that open outward, you need to leave enough clearance space for the doors to open fully. Allowing for enough air circulation and clearance will ensure that your refrigerator runs efficiently and lasts for many years to come.
What happens if not enough space around fridge?
If there is not enough space around the refrigerator, it can make it difficult to access the refrigerator properly. This can make it difficult to open the refrigerator door, and could cause damage to the door, seal, or other parts of the refrigerator.
Additionally, it could lead to poor cooling of the refrigerator, as the air needs to be able to circulate around the unit for proper cooling to occur. Furthermore, if there is not enough space around the refrigerator, it may be difficult to properly clean it, as dust and debris can more easily accumulate when there is not enough spacing.
Finally, not having enough space around the refrigerator can cause an increase in energy costs, as the refrigerator has to work harder to keep the interior cool.
How much ventilation space does a refrigerator need?
A refrigerator requires about a one-inch clearance for air circulation on all sides and the back. This clearance is needed to ensure adequate air circulation throughout the entire unit. A refrigerator also requires two to three inches of clearance above the top and two inches of clearance at the sides and back to allow hot air to escape the unit.
Additionally, proper airflow can be achieved through the bottom of the refrigerator. If the refrigerator is sitting directly atop a carpeted floor or other surface, it may require additional clearance in order to allow the warm air to escape.
Proper ventilation is key to keeping the refrigerator running efficiently and help to extend its lifespan.
How much space do you need around a refrigerator for a kitchen?
A minimum of 6 inches of space should be left around your refrigerator for ventilation, accessibility and to allow for efficient operation and adequate airflow. The sides of the refrigerator should be at least one inch away from the wall, and the back should be at least two inches away from any other appliance.
If the fridge is located between two cabinets, there should be at least 2 inches of space on either side. The top of the refrigerator should be at least 4 inches away from the ceiling, while the bottom should have a gap of at least one inch to allow for good airflow.
Additionally, you should have a gap of at least 3-4 feet behind the fridge, or enough space to pull out the refrigerator for cleaning and maintenance.
Will a 36 inch refrigerator fit in a 36 inch opening?
Yes, a 36 inch refrigerator should fit into a 36 inch opening. This is because the size listed for a refrigerator usually refers to the size of its exterior, not its interior. This means that the 36 inch refrigerator should fit in the 36 inch opening, but it is important to double-check the manufacturer’s specifications to be sure.
Depending on the model, the actual measurements of the refrigerator may be slightly smaller than 36 inches, so you should always check to make sure your opening will accommodate the unit. Also be sure to allow additional clearance space for ventilation, as well as any other pieces of furniture or appliances that may be nearby.
What happens if fridge is too close to wall?
If a fridge is too close to a wall, it can cause several problems. For example, heat that is generated by the condenser on the back or bottom of the fridge will have nowhere to properly dissipate, leading to a decrease in efficiency and an increase in energy costs.
Additionally, the wall can prevent proper circulation of cool air, leading to an increase in temperature inside the fridge and a decrease in its cooling capabilities. Additionally, it can be difficult to open the door properly and to access the items inside if the fridge is too close to a wall.
Over time, this can cause wear and tear on the hinges, increasing the likelihood of premature failure. Lastly, the fridge may be difficult to clean if it’s too close to the wall due to limited access.
In most cases, it’s recommended that a fridge be at least two inches away from any adjacent walls.
How deep is an under counter fridge?
The depth of an under counter fridge varies depending on the exact style and type of refrigerator. Generally, they are anywhere between 550 millimeters (21. 7 inches) and 680 millimeters (26. 8 inches) deep.
This measurement applies to the entire unit, including the internal structures, cooling system and the door. Many modern under counter fridges also come equipped with a range of functions such as digital temperature settings and automatic defrosting.
If you are looking to purchase an under counter fridge, it is best to measure the space in your kitchen first to ensure you get a unit that will fit.
Are under counter fridges standard size?
No, under counter fridges do not necessarily come in a standard size. These appliances come in a variety of sizes, ranging from compact models designed to fit conveniently under kitchen counters to larger models designed for use in commercial settings.
Generally speaking, the size of the under counter fridge you choose depends on the size of your space and the amount of storage you need. It is important to measure the area you plan to install the fridge in and make sure you select a size that fits comfortably and allows regular use.
The good news is that a variety of sizes are available, so you should be able to find one that works in your specific space.
What size is standard depth refrigerator?
The standard depth of a refrigerator is usually around 70-78 inches, which is approximately 5-7/8 to 6-3/8 feet. This size of refrigerator usually provides between 17 and 28 cubic feet of space, depending on the model and size.
Common widths for a standard depth refrigerator are between 30-36 inches. This type of refrigerator may be best for those who have limited space and only need the basic features.
What is difference between counter-depth and standard depth?
The main difference between counter depth and standard depth has to do with the overall dimensions of the refrigerator. Standard depth refrigerators are typically between 28 and 34 inches deep, while counter depth refrigerators are usually no more than 24 inches deep.
This shallow depth can make counter depth refrigerators an appealing choice for people who want their kitchen to look more open and spacious. Counter depth models also tend to fit more seamlessly below countertops, compared to standard depth models.
In addition to the width and depth dimensions, counter depth models tend to be shorter in height than standard depth options, as counter depth models are typically between 60 and 70 inches tall, while standard depth models tend to measure between 66 and 70 inches tall.