Skip to Content

What size shower curtain do I need for a walk in tub?

The size of the shower curtain you need for a walk in tub will depend on the size of the tub. A generally accepted guideline is to get a 70- to 72-inch-wide curtain for a standard 60-inch-wide tub, as this will give you some room for it to hang down on either side of the tub area.

If your tub is wider than that, you may need a wider curtain. If you have a corner walk in tub, you may want two narrower curtains so you can easily open and close the tub, while still having the desired privacy.

Also, make sure to measure the length of the tub because many walk in tubs can be higher than a standard bathtub, and you may need a longer curtain to ensure it reaches the floor or comes close to it.

What is the size for a shower curtain that fits in a bathtub?

When selecting a shower curtain size for a bathtub, you will want to measure the length and height of the tub opening. The standard size shower curtain liner is 72 inches wide by 72 inches long. You can purchase any size longer than the opening, but it must fit both the height and width of the opening.

If you need a shower curtain to fit a tub that’s longer than the standard 72 inches, you can purchase extra-long liners that are 84 or even 96 inches long. For a better fit, opt for wider liners that are 84 inches wide.

To cover your tub and the adjacent walls, look for extra-wide curtains that measure 96 inches wide by 72 inches long.

Can you use a shower curtain with a walk in shower?

Yes, you can use a shower curtain with a walk in shower. Shower curtains provide a functional and stylish way to enhance your bathroom décor while also providing privacy and helping to keep water off the floor.

Shower curtains are relatively inexpensive and can be used to define the shower area in a walk-in shower. When used in combination with a glass door or panel, a shower curtain can create a modern and elegant look for your walk in shower.

When selecting a shower curtain for a walk-in shower, it is important to ensure it is long enough to provide adequate coverage for the entire walk-in shower. Additionally, make sure you choose one made from a shower curtain fabric that is mildew resistant or treated with a mildew-resistant finish to help keep it looking like new.

Finally, when hanging the shower curtain on the wall, use extra-long shower curtain hooks or rings to make sure the curtain fits well and surrounds the walk in shower area.

How do I know what size shower curtain I need?

When it comes to finding the right size shower curtain, it’s important to measure the length of your shower or bathtub so you know the exact size you need. To do this, you’ll want to measure the height of the inner walls of your bathtub or shower stall and the width of the outer base of the bathtub or shower stall.

The curtain will typically extend just beyond the sides of the stall. To make sure you find the right fit, it’s always best to measure twice just to be sure. You should also refer to the product packaging of your shower curtain to verify the length and width.

Most standard-sized shower curtains measure 72-inches long and 72-inches wide, so keep this in mind if you’re having difficulty finding one that fits your measurements. If you’re having trouble finding one that fits your measurements, a custom-made curtain may be the better option.

Are walk in showers standard size?

No, walk in showers are not standard size. The size will vary depending on the size of the bathroom and the type of shower you choose. The size depends on the space available and the type of shower. For example, showers that are larger than standard sizes or multi-faceted showers with multiple showerheads will often require more space.

It is important to measure your bathroom and get the exact size before you purchase your shower. Also, it’s important to factor in the type of shower head you plan to use and any additional features, such as shower wood, that you might want to include.

When deciding on the size of your walk-in shower, you should also consider its placement and how it will fit with the other fixtures in the bathroom. If you want an open shower that is fully visible from the outside, it should be placed with enough room to walk around it comfortably.

If you plan to have your shower next to a wall, you’ll need to make sure it’s the right size for the space you have available.

Is a doorless shower a good idea?

Whether a doorless shower is a good idea depends on the specific needs of the person who will be using it. For those who are able, a doorless shower can be an attractive choice for a variety of reasons.

It can provide an open, airy feeling that many homeowners prefer, and there are fewer cleaning surfaces to maintain, since there are no doors to wipe down or clean around. Additionally, if the bathroom is small, a doorless shower can provide the illusion of extra space.

For people with mobility issues, or young children, however, a doorless shower may not be the best choice, as it can lead to unnecessary falls or spills. Also, without a shower door, water can escape more easily, potentially creating a safety hazard around the bathroom floor.

If the shower is a high-traffic area with several people using it, a shower door can keep potentially hazardous water contained.

Ultimately, the choice of whether a doorless shower is a good idea should be made on a case-by-case basis, considering the specific needs, desires, and safety concerns of those who will be using it.

How do walk in showers not get water everywhere?

Walk in showers can be designed in a variety of ways to minimize the chances of water getting outside the shower enclosure. Generally, these showers are fitted with splash guards that are positioned along all sides to help prevent water from irritatingly rolling out.

The threshold, or lip, of the shower should be sloped downwards to guide the water back into the shower. Many showers also incorporate glass walls and doors which further helps to hold the water inside.

Some also incorporate a ceiling which can be sloped to drain downward, away from the entrance, into a drain or trough. The shower head should be positioned so that it directs the water down, not up or sideways, to help keep all the water contained in the shower area.

Finally, installing a good-quality shower curtain or a door can be an effective way to stop water from spreading outside the shower enclosure.

How do you stop water splashing in a walk in shower?

One option is to install an on-wall shower splash guard. This is a barrier usually made of plastic or glass that catches splashing water and deflects it back into the shower stall. It may also help to keep the water temperature in the shower consistent.

It should be installed at a height that stops water from going outside of the shower. Additionally, you can use a shower curtain. It should have proper weights At the base and magnets on the sides that ensure that it completely seals the shower area so no water can escape.

Additionally, you can install door strips around the door to ensure that water does not escape from the shower. These are strips lined with rubber that act as a barrier to stop water from leaking out.

Finally, the use of a shower door can also help immensely. By installing a door that seals the shower area, it will keep splashing water confined within the shower stall.

Is a walk in shower the same as a wet room?

No, a walk in shower is not the same as a wet room. A walk in shower usually refers to a shower in which the user can simply step in without needing to raise a threshold. This can be beneficial for those who need more accessible options, Senior citizens, and people with arthritis and joint-related issues.

A wet room, on the other hand, is a larger showering space that can take up an entire bathroom or part of a bathroom. It replaces the traditional shower enclosure, tray and bathtub combination and normally includes a fully tiled floor as well as a low-level shower tray or drainage.

The concept of a wet room is to use a single product for the entire room, delivering a luxurious showering experience with a stylish and contemporary look. Wet rooms have the added benefit of offering added space and can look more spacious and aesthetically pleasing with the use of glass screens and doors.

How much longer should shower curtain be than the tub?

Ideally, a shower curtain should be 1-2 inches (2. 5-5 cm) longer than the tub to provide adequate coverage and prevent water from spilling out. This is most important when taking a shower or a bath, as the extra coverage will help contain the water and keep it from getting onto the bathroom floor.

It’s also important to measure the height of the shower curtain rod, as that will determine the height of the shower curtain and should be taken into account when making your purchase. Additionally, it is important to consider the width of the shower curtain for proper coverage.

Make sure to purchase a shower curtain that is wider than the bathtub, as a shower curtain that is not wide enough is likely to leak water.

How many holes are in a 72 inch shower curtain?

The exact number of holes in a 72 inch shower curtain largely depends on the design of the curtain itself. Most traditional shower curtains have 12-15 metal grommets that provide holes for a shower curtain rod.

Some designs have fewer metal grommets, while others have decorative holes that are covered with cloth fabric. Some shower curtains may also include additional, smaller holes for hanging additional features such as a shower liner, additional layers of fabric, or a tieback.

Ultimately, the number of holes in a 72 inch shower curtain is determined by the design of the curtain and can vary widely depending on the design.

Are shower curtains supposed to touch the floor?

Shower curtains are not necessarily supposed to touch the floor. It really depends on the type of shower curtain you have and the layout of the bathroom. If you have a straight curtain rod, then it is often recommended to have the shower curtain ends extended to just before or just on the floor to keep water from splashing outside the shower area.

However, in many bathrooms with a curved curtain rod, the shower curtain will not actually touch the floor and the bottom of the curtain will be slightly above the floor. So it really just depends on the set-up of your bathroom and the type of shower curtain you are using.

Are shower curtains universal size?

No, shower curtains are not universal size. Shower curtains come in a wide variety of sizes and styles to fit shower stalls of all shapes and sizes. Generally, shower curtains come in two standard sizes: 72″ x 72″ and 72″ x 84″, although there are other variations available as well.

Measurements can vary depending on the style, type, design, and material of the shower curtain. When choosing a size, it is important to measure your shower first to ensure you get a curtain that will fit properly.

It’s best to buy a shower curtain that is slightly larger than your shower opening since it can be adjusted with a special shower curtain liner, clips, or hooks to fit snugly and keep out water.

What size is a standard shower?

A standard shower size is typically 34-36 inches wide and 72-78 inches tall without any additional fixtures, such as a shower door or enclosure. The minimum size for a standard shower is typically 30 inches x 30 inches.

If you are considering a shower with more features, such as a shower enclosure, it is important to consider that additional space will be required for the enclosure, doors, and other fixtures. The area needed for a complete shower with enclosure typically requires a space of at least 32-36 inches wide and 72-78 inches tall.

Consider the space you have and the desired features, such as a steam shower, to help you determine the best size for your shower.

What are the different size shower curtains?

Shower curtains come in a variety of sizes to suit a range of shower sizes. Standard-sized curtains measure 70 inches wide by 72 inches long and will fit most residential showers. Extra-long curtains are available for larger shower stalls and measure 78 inches wide by 84 inches long.

A wide variety of custom-sized shower curtains are also available in a range of sizes, including those designed to fit extra-wide bathtubs or showers. For curved or corner showers, stall shower curtains (typically measuring 54 inches wide by 78 inches long) are the preferred size.

Finally, to accommodate a range of window sizes, many companies offer curtains in extra-long and extra-wide sizes.