Toilet seats come in a variety of sizes, but generally speaking they are either round or elongated. Round toilet seats measure 16 ½ inches from the front to the center of the back and elongated toilet seats measure 18 ½ inches from the front to the center of the back.
The height of the seats themselves are relatively the same, measuring ~17 inches. Additionally, some toilet seats are adjustable when it comes to width, allowing you to customize the seat’s size. The main cause for variations in toilet seat sizes is due to the differences in bowls, as the seats have to fit the bowls precisely to work correctly.
Toilets generally come in standard, cadet, and compact sizes, making the seats themselves vary slightly in size.
How do I know toilet seat size?
To determine the size of a toilet seat, you will need to measure the size of your toilet bowl. To do this, measure the distance from the back two bolts of the toilet bowl to the center front of the toilet bowl.
This is the width of your toilet bowl.
Next, measure from the back two bolts of the toilet bowl to the front of the toilet seat. This is the length of your toilet seat.
Once you have the width and length of the toilet bowl and toilet seat, you will be able to determine the size of your toilet seat. Generally, sizes of toilet seats range from 16 inches to 18 inches in width and are either one or two-piece models.
Depending on the size of your toilet bowl, you may need to purchase a round, elongated, or open-front seat. A round seat usually fits in a toilet bowl that measures up to 18 inches in width, an elongated seat fits in a toilet bowl that is larger than 18 inches in width, and an open-front toilet seat, also known as a comfort-height seat, is designed for higher toilet bowls.
It is important to measure your toilet bowl and toilet seat before purchasing a new toilet seat to ensure you get the correct size for your toilet.
Are toilet seats standard size and fitting?
Yes, toilet seats are usually standard in terms of size and fitting. Most will be of a standard size to fit all standard toilets, although occasionally you may find that a certain smaller or larger model of toilet may require a different size seat.
Toilet seat fittings, meanwhile, also tend to be fairly standard. If you are looking for a replacement seat, there are usually a variety of shapes and sizes available in terms of toilet seat fittings.
Finding one to match your existing toilet should be relatively simple, as the stopper part of the seat – which fits into the base of the toilet – will be the same for most full sized seats. Another thing to consider when choosing a seat fitting is the shape of the seat itself, as well as the distance between the screws where it attaches to the toilet.
Most seats will also come with adjustable hinges, so you can ensure the toilet seat fits perfectly.
Do all toilet seat covers fit all toilets?
No, not all toilet seat covers fit all toilets. Toilet seat covers come in a variety of shapes, sizes, and types. Toilet seat covers come in round, oval, and elongated shapes, and the size of the toilet seat cover needs to match the shape and size of the toilet.
Elongated toilet seat covers are designed to fit longer toilets and are generally considered the most comfortable seat cover shape. Round toilet seat covers fit smaller, round toilets, while oval toilet seat covers are designed to fit toilets of an unusual shape.
When shopping for a toilet seat cover, make sure you measure your toilet so you can get the right size and shape.
How do you measure a toilet for a new toilet seat?
Measuring a toilet for a new toilet seat is relatively simple. It’s important that you find the right size of seat for your toilet, as some toilets vary somewhat in size and shape. Here are the steps for how to measure your toilet for a new toilet seat:
1. Begin by measuring the dimensions between the mounting holes on the underside of the toilet. These will be the two holes you use to attach the toilet seat to the toilet. Measure the distance between the two holes.
2. Measure the width of the toilet bowl from its widest point. This will tell you the size of the toilet seat you need.
3. Measure the distance from the front of the toilet bowl to the back wall. Some toilet seats will have an elongated shape that extends a little further back than the toilet bowl.
4. If you have a toilet with an exterior lip or protrusion, measure the length and width of the lip.
Once you’ve taken the measurements, make sure to compare them to the measurements of the toilet seat you are planning to purchase. Most toilet seats will list the measurements on their packaging, so make sure to check that the seat you are buying is compatible with your toilet.
What is the most common size toilet seat?
The most common size toilet seat is known as a standard-sized seat, which is typically 16. 5 inches in length and just over 14 inches in width. This size is widely available in most retail outlets, is generally easy to install, and fits onto most toilets without requiring any major prior adjustments.
Standard-sized toilet seats can be made of either plastic or wood, and come in a variety of colors, styles, and designs to suit your bathroom’s aesthetic.
Do toilet seats come in different widths?
Yes, toilet seats do come in different widths. The standard size of a toilet seat is 14 to 16 inches wide, but some manufacturers have toilet seats that are as small as 12 inches and as large as 20 inches.
The right size will depend on the size of your toilet bowl, as well as the size and shape of your body. It is important to measure the seat carefully before purchasing, as it can be difficult to return the seat once it has been installed.
Some toilet seats also have adjustable widths, making it easy to customize the seat to fit your body. Additionally, some manufacturers offer unique shapes such as elongated and oval, so you can find one that fits your toilet bowl and fits your body best.
Is my toilet 10 or 12 inch?
Your toilet size will depend on the type and size of the toilet you have. In the United States, the most common type of toilet is a standard residential toilet. Standard residential toilets generally have a 12-inch rough-in, meaning that the distance from the rear of the horn (the part of the bowl that sticks up on the backside of the toilet) to the center of the adjacent flange (the pipe fitting where the toilet bolts to the floor) is 12-inches.
This is measured straight back and also straight down. There are also toilets available with a 10-inch rough-in, though these are less common.
To determine your toilet’s size, the easiest way is to measure the distance from the rear of the horn to the center of the flange. You can do this using a tape measure or a ruler. You could also measure the outer diameter of the cone-shaped horn or the distance between the bolt holes in the bottom of the toilet, but these are not accurate methods for measuring the rough-in.
If you have any difficulties, it is best to contact a professional plumber for assistance.
How do I know if my toilet is 10 inch or 12 inch?
In order to determine whether your toilet is a 10-inch or 12-inch model, you will need to measure the distance from the floor to the centerline of the mounting hole on the back the the toilet bowl. This measurement is known as the “rough-in” and it will give you the depth (meaning inches out from the wall) of your toilet.
For example, toilets with a 10-inch rough-in will be approximately 10 inches from the wall. Likewise, a 12-inch rough-in measurement would be 12 inches from the wall.
If you have difficulty determining the rough-in measurement of your toilet, you can also look for a model number or name plate located on the back of the unit, typically near the water supply line. This name plate will provide you with the model name and number, which should allow you to determine the rough-in measurement of your toilet.
If you are still unsure of your toilet’s rough-in, you can also contact the manufacturer directly. By providing them with your model number and other details, they should be able to provide you with the exact dimensions of your toilet.
Are all American Standard toilet seats the same size?
No, all American Standard toilet seats are not the same size. While most standard toilet seats, including those from American Standard, are designed to fit the standard of 15″ by 14. 25″, which fits most standard toilets, there are certain models that come in other sizes in order to accommodate particular shapes and sizes of toilets.
American Standard offers a variety of toilet seats in different styles, materials, and sizes to meet the needs of every consumer. You can find sizes ranging from compact round seats to elongated ones made for handicapped individuals.
Additionally, American Standard offers toilet seats with various features to suit your needs, such as padded seats, slow-close lids, handles and more.
Are elongated toilet seats more comfortable?
Elongated toilet seats can certainly be more comfortable than standard round toilet seats, depending on your body type. The longer design of an elongated seat provides more surface area, making it especially beneficial for those with a larger frame.
The increased surface area can provide much-needed support when sitting down, while providing greater comfort overall. Additionally, the slightly contoured design of an elongated seat often stops your legs from slipping off, which can be especially beneficial for those who have difficulty with mobility.
However, elongated seats can take up more space and may not fit as easily in smaller bathrooms, so be sure to measure your bathroom before purchasing. Considering all of this, it’s clear that elongated toilet seats can be more comfortable for some individuals.
Can you put an elongated toilet seat on a standard toilet?
Yes, you can put an elongated toilet seat on a standard toilet. Elongated toilet seats are designed to fit both standard and elongated toilets. In most cases, you need to ensure that the toilet seat is the same length as the tank of the toilet.
To do this, measure the length of the tank before you purchase an elongated seat. When installing the seat, follow the manufacturer’s instructions to ensure a good fit and secure attachment. In addition, some elongated seats can be adjusted to fit both standard and elongated toilet bowls.
If you have any questions about the installation, contact the manufacturer for more information.
How long is a small toilet?
A small toilet typically measures between 30 to 36 inches in length and 15 to 18 inches in width. To meet the federal requirement for ADA (Americans with Disabilities Act) compliance, the minimum length must be 17 inches and the minimum width should measure 21 inches.
It is important to note that the measurements of a small toilet will vary depending on the model, so it is best to check the manual before making a purchase.
What is a shorter toilet called?
A shorter toilet is also known as a Comfort Height toilet. The term Comfort Height is used to refer to toilets that are taller than the standard toilet height of 15 inches, usually measuring around 17 to 19 inches.
This higher toilet seat height is designed to promote a more natural and comfortable sitting position, making it easier to stand up or sit down. Comfort Height toilets are becoming increasingly popular as they are more accessible and easier to use for seniors, those with disabilities, and even people of average height who find the standard toilet height too low or uncomfortable.
Do they make short toilets?
No, there are no toilets specifically designed to be shorter than normal. Generally speaking, the standard toilet height off the ground is 14-15 inches, and there is no shorter standard toilet height.
Some people might prefer to have a shorter toilet, especially those with limited mobility, however the only way to truly get a shorter toilet is to buy a toilet with an adjustable or extended height and then adjust the height down to a shorter level.
It is important to take into account the comfort and safety of those using the toilet when deciding on the height, as there should be a balance of being able to sit down and stand up comfortably and safely.