Skip to Content

What to do when your pilot light goes out?

When a pilot light goes out, it typically means that the thermocouple is not detecting heat and is shutting off the flow of gas. This is a safety measure to prevent a gas leak or potential explosion.

Before attempting to relight the pilot light, make sure to check that the gas valve is in the “on” position and that all doors, windows, and vents in the room are open. If the gas valve is off, it may need to be replaced.

To relight the pilot light, first turn the gas valve control knob “off”, and wait for at least five minutes for any gas to clear from the area. Then hold a long match or fireplace lighter up to the pilot light and turn the knob to “pilot”.

Taping the button down with a toothpick or matchstick can help hold the gas valve in the pilot position. Once the button is held down, the flame from the lighter should ignite the gas. Once the pilot light continues to burn steadily, turn the gas valve control knob to the “on” position.

If the pilot light continues to go out, it may indicate that the pilot orifice is too high and you will need to contact a certified technician to adjust it. It could also indicate a problem with the thermocouple, in which case it will likely need to be replaced.

Do I need to turn gas off if pilot light goes out?

Yes, you should turn off the gas if the pilot light goes out. You should turn the gas valve to the “off” position. Once the gas is off, wait at least 5 minutes before attempting to relight the pilot light.

If after five minutes the pilot light still won’t stay lit, you should call an experienced service technician. If the pilot light continues to go out after it is relit, then you should call a technician to check for air leaks or other gas system issues, as this could be a sign of a more serious problem.

Additionally, if you can smell gas when the pilot light is out, then you should evacuate the area immediately, and call an experienced service technician right away.

Can you relight a pilot light?

Yes, it is possible to relight a pilot light. The process for doing so varies depending on the model of appliance, but typically involves pushing a reset button, turning a dial or switch from “Off” to “Pilot,” and pressing and holding a knob down while igniting a flame or electric spark near the pilot light.

To make relighting the pilot light easier, it is important to first make sure that the gas supply is turned off and the appliance is cooled down. It is also recommended to wear protective eyewear during this process to protect against potential sparks or fire.

Once the process is complete, the appliance can be tested to make sure that it is working properly.

What do I do if my pilot light won’t light?

If your pilot light won’t light, the first thing you should do is check to see if the pilot light’s flame is burning correctly or not. If it is not, the most likely causes are an accumulation of dirt and debris, or the flame has been adjusted too low or too high.

If either of these happens, it needs to be cleaned and adjusted accordingly.

Before continuing, you should check to make sure the gas valve leading to the pilot light is in the correct open position. This is essential as it provides the gas to the pilot light and if the valve is not in the correct position gas will not flow to the pilot light.

After these steps have been completed, you should try to light the pilot light manually. To do this, locate the pilot light switch, hold it for a few seconds, then release it and light the end of a long match or lighter at the pilot light location.

After the pilot light has been lit, leave it for an additional 30-60 seconds to ensure the gas and pilot light mix properly and that the flame is burning correctly.

If none of these and troubleshooting steps help, it could be that the thermocouple has gone bad, the gas pressure is incorrect, or another problem with the gas supply. If this is the case, you should contact a professional to inspect your gas appliance and make the necessary repairs.

Will the gas company light my pilot?

No, the gas company is not responsible for lighting your pilot. It is important to note that gas companies are prohibited from doing this due to safety regulations. It is important that you light the pilot yourself or hire a professional to do it for you.

Before lighting your pilot, make sure you check for any gas leaks and that all windows and doors are open for proper ventilation. Additionally, you will need to have the proper tools and materials such as a match or lighter, a screwdriver, pliers, a wrench and a flashlight.

Following your gas company’s instructions, open the valve and adjust the knob until you hear the gas flow. With the knob still in the open position, use your match or lighter and carefully light the pilot.

Hold the flame to the pilot for at least one minute before releasing and making sure that the pilot has successfully ignited and that it stays lit. If the pilot goes out, repeat the process until it stays lit and then make sure to readjust the knob to the closed position.

How much does it cost to relight a pilot light?

The cost to relight a pilot light will depend on a couple factors, including the type of heater, labor costs, and any necessary supplies. Generally speaking, however, it should be relatively inexpensive to relight a pilot light.

If you have a gas furnace, for instance, relighting the pilot light is a relatively straightforward process that most people can do on their own through following their heater manual’s instructions. This typically requires a gas valve key, which can be purchased at most hardware stores for less than $10.

It’s important to remember, however, that if the heater is not functioning properly, the pilot light may only be a symptom of a larger problem, so it’s best to have a registered HVAC professional inspect the system and determine if more expensive repairs are necessary.

Additionally, if you do not feel comfortable lighting the pilot on your own, you should opt to have a professional do the work to avoid any safety issues. This typically costs between $75 and $125.

Does leaving the pilot light on cost money?

Yes, leaving the pilot light on will cost money. The pilot light is constantly burning, so it is using gas to keep the flame lit. Depending on the efficiency of your furnace, leaving the pilot light on could add up to as much as $30 to $80 to your gas bill annually.

Additionally, it is important to note that leaving the pilot light on can be dangerous, as it can potentially lead to a carbon monoxide buildup in the home. It is important to make sure the furnace is working correctly before leaving it on.

If you are unsure about the condition of your furnace or if it is not functioning properly, it is best to call a professional to inspect it before leaving the pilot light on.

Can a pilot light cause a fire?

Yes, a pilot light can cause a fire. A pilot light is a small, continuously burning flame that remains lit to serve as a starter for a larger flame. As such, a pilot light can cause a fire if not properly monitored, maintained and regulated.

Improperly maintained pilot lights can become contaminated with dirt and debris, resulting in them becoming more prone to sparking and flaming. Poorly placed pilot lights can also pose a greater risk.

Pilot lights that are too close to flammable items like curtains, furniture and clothing can ignite these pieces, ultimately leading to a fire.

Finally, if a malfunction occurs in the appliance, such as a mixture of too-rich fuel and air, then a pilot light can cause a fire. If the flame continues to draw too much fuel and the mixture becomes too rich, it can ignite and cause a fire.

In order to reduce the risk of a fire caused by a pilot light, it is important to routinely check and inspect the appliance for dirt or malfunction to ensure the pilot light is clean and functioning properly.

Additionally, you should keep all flammable materials and furniture away from the pilot light at least 6-12 inches away to reduce the risk of ignition.

How long does a pilot light last?

The lifespan of a pilot light can vary depending on the type of appliance and usage, but generally it can be expected to last between 5-20 years. Pilot lights are lit constantly, so the length of their life can depend on how often the appliance is used and how efficiently the pilot light is burning.

If a pilot light is not burning efficiently, it can put an additional strain on the part, both reducing its lifetime and possibly leading to a malfunction in the appliance. To extend the life of a pilot light, it is important to check that it is burning correctly, as well as regularly cleaning and replacing gas controls, orifices and thermocouplers.

Regular maintenance can help ensure the pilot light operates safely and efficiently and lasts as long as possible.

Is it OK to leave pilot light on all year?

Yes, it is generally considered to be okay to leave your pilot light on all year. A pilot light is the small flame that stays lit in the burner of your furnace, water heater, or stove. Many people assume that having the pilot light always lit increases their energy costs, but the reality is, leaving it on all year actually helps you save on energy costs in the long run.

Leaving the pilot light on means the device is heated up and ready to be used when needed, so you don’t have to waste energy heating it up every time you need to use it. Additionally, appliances equipped with a pilot light are usually more efficient when they’re kept on all the time.

Because they’re constantly keeping their parts warm, they won’t have to expend energy to heat back up if they’ve been turned off. Even after turning the appliance off, the pilot light uses less energy than a traditional light bulb.

When it comes to safety, having the pilot light on all year can be beneficial as well. Regular maintenance and inspection should still be done, just as you would when the pilot light isn’t lit. But having it lit can help alert you to any potential gas issues that need to be addressed earlier on.

Overall, it is definitely okay to leave your pilot light on all year. Keeping the pilot light lit will not only help you save energy costs, but it could also help prevent further safety hazards.

Can you get carbon monoxide poisoning from a pilot light?

Yes, it is possible to get carbon monoxide poisoning from a pilot light. The pilot light is a small gas flame used to ignite the gas burner in gas appliances as part of their normal operation. Carbon monoxide (CO) is an odorless, colorless gas produced by burning fuel such as gas, wood, oil, and kerosene.

When these appliances are not operating properly, CO can leak from them and the pilot light can be a source of CO. Symptoms of carbon monoxide poisoning range from nausea, headaches and weakness to confusion, dizziness and even death.

It is important that carbon monoxide detectors be installed in your home to alert you if there is a leak or a rise in CO levels. It is also important to make sure all gas appliances are properly maintained and any possible leaks or problems are addressed right away.

Should I turn off furnace if pilot light is out?

Yes, it is important that you turn off the furnace if the pilot light is out. This is because a pilot light that is not functioning properly can cause carbon monoxide to build up in your home. Carbon monoxide is an odorless, colorless gas that can be dangerous if breathed in high concentrations.

Therefore, if the pilot light is out, it is best to turn off the furnace and contact a service technician to check it out. At the very least, you should open windows and doors to make sure the area is well ventilated.

Additionally, you should ensure that you have a working carbon monoxide detector on each floor of your home and test it regularly to be sure that it is functioning properly.

How long should you smell gas after lighting pilot?

You should immediately smell gas after you light the pilot, and then for about a minute after. If you can still smell gas after that point, there could be a problem with the gas or airflow and the pilot light should be extinguished and checked by a qualified technician.

How do I know if my gas connection is leaking?

If you suspect that your gas connection is leaking, there are several steps you can take to determine the cause. First, you should listen carefully for any hissing or gurgling sounds near any gas appliances or piping.

If you hear any unusual noises, it’s time to contact your local gas utility.

Second, you should look for signs of corrosion or discoloration on any of your gas appliances, fixtures, or piping. If you notice anything out of the ordinary, contact your gas utility as soon as possible.

Third, if you have an odor from your gas, you should take immediate action. Natural gas has a distinct smell that is sometimes described as sulfur-like, and it will be strongest when you are near the suspected source of the leak.

If you smell natural gas, leave the area immediately and turn off the main gas supply line before calling your gas utility.

By taking these precautionary steps, you should be able to determine whether your gas connection is leaking. It is important to contact a gas utility professional to repair any leaks you may find, as they can be dangerous if left unchecked.

What happens if you sleep in a house with a gas leak?

Sleeping in a house with a gas leak can be extremely dangerous and even deadly. Gas leaks can cause symptoms such as nausea, dizziness, headaches, and fatigue. At worse, inhaling a large amount of gas can leads to poisoning and oxygen deprivation, resulting in unconsciousness and potentially death.

If a gas leak occurs while you are sleeping, it can be even more dangerous since you will not be aware of the signs and symptoms.

If you suspect there may be a gas leak in your home, it is important to seek help immediately. Have a professional inspect the area as soon as possible to make sure it is safe to stay in the home. If it is not possible or safe to stay in the home, then you should evacuate immediately and contact your local gas utility to report the leak.