The smallest footprint for a toilet is likely one of the models that is specifically designed to conserve space, such as a corner toilet or a wall-mounted toilet. These models are designed to be installed in a corner or against a wall, meaning they take up very little room while also maximizing space.
Additionally, they’re typically more compact than traditional toilets, so they don’t require as much plumbing or floor space. For even more space-saving, some models can be combined with a sink that is mounted on the wall above the toilet, removing the need for a separate sink and giving the entire bathroom a much more compact overall feel.
In terms of a traditional toilet, many newer models are designed to minimize their footprint by reducing the area needed to install the seat and tank. Compact toilets have a skinnier bowl with a smaller tank, further reducing the size of the overall unit.
Along with this, many newer models are designed to come with a low-profile or slimline tank lid which can also reduce the size and increase the space overall.
What is the least dimension of a toilet?
The least dimension of a toilet shall be a minimum of 18 inches from the center line of the toilet to any adjoining wall or straight side of the toilet stall, with a minimum width of 36 inches. The depth of the toilet stall for walls or partitions shall not be less than 60 inches from the side wall to the face of the toilet.
The toilet seat shall be located with a minimum of 15 inches from the side wall or partition to the center line of the toilet. In addition, the toilet door or partition shall be a minimum of 32 inches in width with a clearance of at least three feet in front of the toilet.
The height of the toilet should be between 15 and 17 inches above the floor, and the width shall not be less than 18 inches. When a toilet and bidet are installed together, the minimum clearance between them should be 17 inches.
The minimum clearance from any side wall or partition should be 12 inches. In addition, a grab bar should be installed at the back wall of the toilet area with a minimum height of 33 inches from the floor.
Is there a small size toilet?
Yes, there are different types of small size toilets available in the market. These compact toilets are ideal for a bathroom that is short of space. The reduced bowl size and rimless design makes them easier to install and maintain.
These toilets are also more efficient in terms of water usage when compared to traditional toilets. Some small size toilets come with special features such as a dual-flush system, toilet seat warmers, and built-in bidets.
The variety of options available makes finding a small size toilet easier than ever.
How much space is needed for a toilet?
The amount of space needed for a toilet depends on the type of toilet you’re installing. A standard two-piece toilet typically requires a 36-inch clearance from the center of the toilet to any wall or obstruction.
A one-piece toilet needs about 30 inches. If a vanity or cabinet is being installed next to the toilet, it may require even more space so it can open and close properly. Additionally, at least 21 inches must be left in front of the toilet for adequate space to sit and stand.
The space at the sides of the toilet should also allow for easy access and cleaning. Placement of the toilet is crucial, as it should be easily accessible and allow enough room to move around it.
What is a shorter toilet called?
A shorter toilet is generally referred to as a “comfort height toilet”. These types of toilets are designed to be a convenient height for wheelchair users, as well as for individuals of shorter stature.
Comfort height toilets typically measure 17 to 19 inches from the top of the toilet bowl to the floor, as opposed to the standard 14 to 15 inch height in a traditional toilet. Comfort height toilets may have taller bowl heights overall, so even the tallest individuals may find comfort height toilets a more comfortable choice.
Are all toilets 12 inches from wall?
No, not all toilets are 12 inches from the wall. The standard distance from the wall for a residential toilet is 12 inches. However, this may vary depending on the type, style, and size of the toilet.
For commercial toilets, the distance from the wall is usually greater in order to accommodate larger fixtures. Also, certain styles of toilets may also have different dimensions for the distance from the wall.
As a result, it is important to measure the distance from the wall to the center of the bolt holes on the toilet before installation.
Is 3 feet wide enough for a toilet?
The answer to this question depends on the size and layout of the bathroom, as well as the type and size of the toilet being considered. Generally speaking, 3 feet wide is considered to be the minimum standard for a comfortable toilet space.
In a smaller bathroom, it may be more appropriate to get a compact toilet model. A round bowl toilet will require less space than an elongated bowl model. Additionally, wall-mounted models require less space than floor-mounted models, as there is no need for space to accommodate the tank and base.
No matter what style or type of toilet is being considered, it is also important to make sure that there is enough room to maneuver around the toilet; a minimum of a 15” clearance for the front of the toilet and an 18” clearance for the side is recommended.
Additionally, a minimum of 21” of depth space is needed behind the toilet in order to install the pipes and tank correctly.
All in all, yes, 3 feet wide is wide enough for a toilet, but it is important to factor in other considerations as well.
How do you pick a toilet for a small bathroom?
When you are choosing a toilet for a small bathroom, there are many factors to consider. First and foremost, measure the available space. This will ensure that you don’t select a toilet that’s too large and end up blocking important elements like the sink or door.
Also consider corner toilets, which only require the space of one wall rather than two.
Another factor to consider is water efficiency. Toilets that use 1. 6 gallons per flush (gpf) or less are generally more efficient. Additionally, look for toilets with dual-flush features that help conserve water.
Regular flushing for solid waste and light flushing for liquid waste can really save on resources.
Finally, consider the design. For small bathrooms, it’s best to choose something simple and streamlined. Wall-mounted toilets are great options that take up minimal space, and low-profile toilets with low tanks are made for small bathrooms.
It may also be helpful to look for toilets with a comfort height so that sitting down and standing back up will be easier (applicable for anyone 5’8” and taller).
Most importantly, if you are unsure about installation, always seek the help of a professional plumber. They can assess your bathroom set-up and offer the best advice so that you don’t experience any unnecessary issues.
Remember, when it comes to picking a toilet for a small bathroom, larger isn’t always better. Careful selection to match the particular space and needs is the best way to go.
Are there different sizes for toilets?
Yes, there are different sizes for toilets. Toilets come in a variety of sizes, shapes, and heights to accommodate a range of bathrooms. Standard toilets are typically between 12 and 14 inches in height, though manufacturers will offer variations for those who may need a higher toilet for comfort.
Additionally, toilet bowls can come in both round and elongated shapes to deliver varying levels of comfort and ease of use. The toilet tank also comes in different sizes, though it can sometimes be adapted to fit a variety of shapes and sizes.
Ultimately, a wide range of toilet sizes and shapes exists to ensure that anyone can find an option that meets the needs of their bathroom and provides the desired level of comfort.
What kind of toilet does a tiny house use?
A tiny house uses a composting toilet, sometimes referred to as an eco-friendly toilet, that uses a process of composting and evaporation to turn human waste into fertilizer. This type of toilet does not have a traditional tank and pipe system like a standard toilet.
Instead, the waste and accompanying liquids are collected in a holding tank, where the waste is broken down by enzymes and bacteria over a period of time. Once the process is complete, the waste breaks down into natural components and the liquid evaporates into the air (or can be vented safely outside).
This allows for the fecal matter to be used as organic fertilizer and the liquid to dissipate into nature cleanly and safely. This type of toilet is cost-effective, eco-friendly and requires no connection to a sewer line, so it is the perfect option for tiny house living.
What kind of toilet should I use in a small bathroom?
If you have a small bathroom, the best type of toilet to use is a compact toilet, also known as a “comfort height” toilet. Compact toilets are becoming increasingly popular in small bathrooms due to their space-saving design, typically being several inches shorter than traditional toilets.
Comfort height toilets also offer ergonomic benefits, as they are designed to be higher than standard toilets, creating a more comfortable experience when sitting or standing. Compact toilets also offer a variety of features such as elongated bowls and powerful flushing systems, making them a great choice for any small bathroom.
When deciding on a toilet, look for models that use less water, as this will help reduce water bills. Additionally, the type of the flush mechanism should be considered, as powerful flushes are more efficient in small spaces and help prevent clogging.
What is a micro toilet?
A micro toilet is a type of waterless or composting toilet that is designed to take up minimal space and resources. It is often used in places where space is limited, such as boats, motor homes, and other recreational vehicles (RV).
Micro toilets are designed to work without the need for a large water supply, thus making them ideal for trips where water is scarce or in places where plumbing is not available. The main component of a micro toilet is a sealed container of either plastic or metal.
The waste is generally stored in the container until it can be disposed of properly in an environmental-friendly manner. In some cases, the waste can be treated through a filtration or composting process to reduce environmental impact.
Micro toilets can typically be utilized for up to 36 hours before needing to be emptied or replaced, limiting the need for frequent maintenance.
Can you put a regular toilet in a tiny house?
Yes, it is possible to put a regular toilet in a tiny house. Depending on the size and layout of your tiny home, you may need to consider a few factors before purchasing a toilet. For example, some toilets have a tank attached to the wall, which can take up precious space in a small home.
If space limitations are a concern, compact toilets that don’t have a tank might be the better choice. Another consideration is the size of your bathroom. A standard-size toilet (roughly 30”) may be too large for a tiny bathroom and might not fit comfortably.
Alternatively, a short depth toilet or corner style toilet may be a better choice since they require less space and can fit better into a smaller area. Additionally, there are also various flushing mechanisms you can choose from, like dual flush or pressure assist.
Ultimately, when selecting a toilet for your tiny house, consider the size, shape, and flushing type that will best suit your needs.
Is there a toilet that doesn’t need plumbing?
Yes, there is a type of toilet that doesn’t require any plumbing. It is called a composting toilet and it works by collecting human waste in a holding tank. The waste is then naturally broken down over time through a process of aerobic digestion, meaning that it doesn’t need to be flushed away or connected to any plumbing.
Composting toilets can be a great solution for rural areas or areas where plumbing is difficult or expensive to install. In addition, many composting toilets are efficient and can save water when compared to traditional flushing toilets.
Why would I want an elongated toilet bowl?
An elongated toilet bowl can provide a variety of benefits. First and foremost, it can provide a more comfortable seating experience. Elongated bowls are typically two to three inches longer than other toilets and provide greater support for the natural curvature of the body.
This added length not only offers improved comfort, but it also helps to reduce strain on the lower back and legs when seated on the toilet. Secondly, elongated bowls are often considered more aesthetically pleasing than standard round bowls, as the elongated shape can add a more elegantly curved look to a bathroom.
Additionally, elongated bowls tend to provide a larger flushing area than round toilets, giving them a better flushing performance to help keep the bowl and bathroom clean. Finally, elongated bowls typically provide a taller seating height, making them a great choice for anyone with mobility issues, as the higher sitting position is often easier to get on and off of.