Skip to Content

What type of drain stopper do I have?

The type of drain stopper you have will depend on the style of sink and bathtub you have installed. Generally, there are three types of drain stoppers – pull chain stoppers, push-pull stoppers, and toe-touch stoppers.

Pull Chain Stopper: This type of stopper is typically found in older bathrooms, as it is quite basic compared to the other types. It includes a piece of metal chain that is attached to the stopper itself and hangs over the edge of the sink or tub.

To use this type of stopper, you will pull the chain to raise and lower the stopper, blocking and unblocking the drain.

Push-Pull Stopper: This type of stopper is comprised of two parts – the main body, which contains the drain plug, and the lever that is used to open and close the drain. To operate the stopper, you will push and pull the lever, controlling the height of the stopper in the drain.

This type of stopper is very common in most modern bathrooms.

Toe-Touch Stopper: This type of stopper is typically installed in bathtubs and includes a plunger which slides up and down. To use this type of stopper, you will use your toes to press down on the plunger in order to lower the stopper and block the drain.

To unblock the drain, you will press down with your toes again, allowing the stopper to rise and the water to escape.

In order to determine the type of drain stopper you have, you will need to look at the drain and see which type of stopper is installed.

Are all drain stoppers the same?

No, not all drain stoppers are the same. Different types of sinks and tubs use different types of drain stoppers. Common types of stoppers include pop-up, lift-and-turn, and toe touch. Pop-up stoppers are typically used in sinks with overflow drains, meaning the sink has a second drain near the faucet that serves to keep the sink from overflowing when the main stopper is closed.

Lift-and-turn stoppers look like a plug on a stem and are opened and closed by turning the plug itself, while toe touch stoppers are actuated by pressing a button on the top of the stopper. Some sinks will also use a plunger style stopper, where the stopper is blocked by a rod with a plunger at the end.

Finally, there are also easily removable hair strainers designed to fit most standard drains, which allow waste water to flow normally but catch large items like hair that can clog the drain.

How do you unclog a bathtub drain with a non removable stopper?

One way to unclog a bathtub drain with a non removable stopper is to use a drain snake. Start by removing the excess water and preparing the necessary tools. Put on a pair of gloves, safety glasses and begin by inserting the drain snake into the bathtub drain, feeding the cable through several feet, if possible.

Doing this will help you grab the debris or blockage causing the clogging. Once you can feel the blockage, twist the handle clockwise, so it will start to break apart the debris. After the debris has been removed, use the drain snake to get rid of the debris and then, pull the cable out and check it to make sure there is no remaining debris.

Finally, rinse the drain using hot water and test the drain to make sure it’s unclogged.

Can you replace the drain stopper in a bathtub?

Yes, you can replace the drain stopper in a bathtub. The process is fairly simple and requires minimal tools but it may take some time to complete. First, you’ll need to locate the trip lever located on the overflow drain.

This will be attached to a linkage connected to the stopper underneath the tub. Detach the linkage by removing the screw and unscrew the stopper from the drain. You can then choose and purchase a new stopper.

Make sure to measure the drainage opening before you buy a new one so you get the right size. Once you have the new stopper, you will attach it to the drain in the same way the old one came off. Once the new stopper is securely in place, you can attach the linkage and the trip lever back together.

You should also secure the screw with bar soap or other adhesive to make sure the linkage won’t move. Lastly, test your new stopper to ensure it’s working properly.

Are there different size drain stoppers?

Yes, there are indeed different sizes of drain stoppers. The size of the drain stoppers can vary depending on the type of sink or bathtub, as well as the size of the hole. Generally, drain stoppers come in three main sizes—1 1/4 inch, 1 1/2 inch, and 1 3/4 inch.

However, there are also universal sizes available that can fit any size drain hole. The shape of the stopper is also important, as some may be round, oval, or square-shaped and some may come with a handle attached.

Make sure to measure the size of the drain hole and double check the measurements of the stopper before purchasing one.

What are 3 types of drain pipes?

Three common types of drain pipes are PVC pipes, ABS pipes, and cast iron pipes. PVC pipes are widely used for home plumbing systems due to their durability, affordability, and flexibility. ABS pipes are less expensive than PVC and offer a smoother inner surface, allowing water to flow through faster but they are not as durable and do not handle hot water very well.

Cast iron pipes, on the other hand, are more expensive and require more fitting, but are incredibly durable and can handle extremely hot temperatures. This material is ideal for commercial and residential drainage systems.

Are sink stoppers standard size?

No, sink stoppers are not a standard size. The size of a sink stopper depends on the type of sink it is for, as well as the type of stopper. For example, a standard sink drain stopper typically measures 2 and a half inches, while a pop-up sink stopper typically measures 3 inches.

The size of a push-down sink stopper can vary depending on the specific model, but generally ranges from 1 to 2 and three quarters inches. Additionally, while most sink stoppers are made with plastic, more expensive designs are available in metal, and can vary in size accordingly.

Ultimately, it is important to compare the measurements of replacement sink stoppers to the existing stopper to ensure a proper fit.

How do I know what size pop up drain I need?

The size of pop up drain you need largely depends on the type of sink you’re installing it in, as well as the type of pop up drain you’ve chosen. Typically, for bathroom sinks, you will need a 1 ½ inch pop up drain.

However, for other types of sinks, such as kitchen sinks, you may require a slightly larger size – usually a 2 inch pop up drain. It’s important to make sure that the size of your pop up drain fits the type of sink it’s installed in, to avoid any potential issues down the line.

If you’re unsure of the size of pop up drain you need, it’s best to consult a professional to ensure the proper size is selected. Generally speaking, it’s also important to check your local plumbing code to ensure that your pop up drain is compliant with the required standards.

What size is a standard tub stopper?

The size of a standard tub stopper varies depending on the type of stopper and the manufacturer. Generally speaking, a standard tub stopper will typically be around 1-3/4 inches to 2-3/4 inches in diameter.

It is important to measure the size of your existing stopper before purchasing a replacement, as sizes may vary slightly between brands and manufacturers. Additionally, double-check the type of stopper that your tub uses, as this will further determine the size you need.

What are the different types of tub spouts?

Tub spouts come in a variety of different styles, shapes, and materials, making it easy to find one that best suits the needs and design of a bathroom. Common types of tub spouts include:

– Diverter Spouts: Diverter spouts are designed to prevent water from hitting the bathtub walls and allow for better control of the water when using a handheld shower head. They feature a diverter valve that is usually pushed up to switch from the spout to the shower head.

– Pull up Spouts: Pull up spouts are simple fixtures that easily control water with the push or pull of a lever. They normally attach to the wall of the tub and feature a diverter valve.

– Wall-Mount Spouts: Wall-mount spouts are great for bathtubs with a smaller footprint. As the name implies, they are mounted directly on the wall and can accommodate a handheld showerhead or have a separate showerhead flower attachment.

– Install Above the Tub Spouts: These types of spouts are mounted above the tub and feature a long neck that carries the water down to the tub. A separate diverter valve is also required for handheld showers.

– Single Function Spouts: These types of spouts are designed for a single function, either to release water from the spout to the bathtub, or to act as a showerhead.

– Decorative Spouts: Decorative tub spouts provide a decorative option for bathrooms. These spouts often feature intricate designs and colors to provide extra personality.

How do you measure a tub drain stopper?

Measuring a tub drain stopper involves measuring the overall diameter of the stopper and the diameter of the installation hole on the bathtub. The overall diameter of the stopper is typically measured by placing a straight edge ruler across its widest part and checking its diameter.

The diameter of the installation hole can be measured by inserting a measuring tape into the hole and checking its diameter. When measuring the diameter, it is important to keep the measuring tape level in order for an accurate measure.

It is also important to ensure that the stopper fits securely in the installation hole without being too tight or too loose. Once the overall diameter and diameter of the installation hole have been accurately measured, the necessary size of the stopper can be selected.

How do push down drains work?

Push down drains use a mechanism called a stopper, also known as a pop-up drain, to control the flow of water in and out of the sink basin. The stopper is connected to a linkage rod and pivot rod, which move up and down when the stopper is raised, lowered, or adjusted.

When the stopper is lifted, the linkage rod and pivot rod move up, releasing the seal on the drain assembly and allowing water to drain from the basin. When the stopper is pushed down, the pivot rod and linkage rod move down, creating a seal and preventing water from flowing out.

The stopper may also be adjusted to control the water flow rate. Depending on the type of drain assembly, the stopper can be adjusted to control water depth in the basin, act as a seal to contain the contents of the basin, and regulate the water pressure throughout the system.

How does a push up plug work?

A push up plug works by simply pushing the plug into the drain hole of a sink or basin. The plug is designed to fit the diameter of the drain hole and the end of the plug is usually concave to ensure a good seal.

Once the plug is inserted into the hole it should remain in place until it is manually removed by using the pull cord at the top. The plug is made of a soft and flexible material that conforms to the shape of the drain hole, helping to create an air-tight seal.

When the plug is pulled out of the hole, the center catches the water, keeping it from draining out. This makes it a great tool for keeping a bath or sink full of water for lengthy periods of time.

Are pop up drains a good idea?

Pop up drains can be a good idea, depending on what your needs are. Pop up drains are great for bathrooms that require deep cleaning, as they can provide easy access to the drain and pipe. Pop up drains can also be helpful in preventing clogs and maintaining proper flow in your plumbing system, as well as help reduce your water consumption.

Additionally, pop up drains can be aesthetically pleasing and can come in a variety of materials and finishes, so you can find a drain that matches your desired aesthetic. The main drawbacks to pop up drains are that they can be more expensive than most other drains, and also require some maintenance, such as replacing the stopper on a regular basis.

Ultimately, whether or not a pop up drain is a good idea for you will depend on your individual needs, so it’s always best to consult with a plumbing professional before making a decision.

Do you need overflow on pop up drain?

Yes, a pop up drain typically needs an overflow feature. An overflow is important to prevent the water level from rising above the overflow pipe. This overflow pipe prevents busting of the drain lines and other damages due to the high water pressure.

It also helps to flush the sink with more water and removes any blockages. Since the water is not allowed to rise above the overflow, it will not splash and cause any water damage on the walls, cupboards, and other fixtures, this feature helps to protect them from spilling water.

Furthermore, the overflow is an added safety feature as it prevents overflowing of the sink or basin, avoiding any kind of avoidable accidents.