Skip to Content

Where do I find the model number on my Moen faucet?

The model number on your Moen faucet can be found on the underside of the spout, or on the valve body located behind your handles. In most cases, you can also locate the model number on the original packaging or on the warranty card that came with your faucet.

If you are unable to find either of these, you may be able to look up your model online by searching the product name and brand. Additionally, if your faucet was installed prior to 1976, the model number may be located inside the handle.

To access this number, use a flathead screwdriver to remove the setscrew at the bottom of your handle. This will allow you to lift the handle off the faucet.

How do I identify my faucet model?

Identifying your faucet model can be a difficult task. Fortunately, there are several ways you can go about pinpointing the model of your faucet.

The first method is to look inside your faucet for a manufacturer’s name or logo. This is often stamped onto the metal or written on a sticker on the exterior of the faucet. Oftentimes, these markings will also include a model number which can be used to look up the corresponding product on the manufacturer’s website.

Another way to figure out your faucet model is to look up the serial number. This should be printed on a metal plate on the exterior of the faucet. Finding the serial number can sometimes be tricky, so you may need to take the faucet apart in order to locate it.

Once you have the serial number, you can contact the manufacturer’s customer service department directly to ask for the make and model.

Finally, if you don’t have the model number, make and model, or serial number, then you can also search for compatible parts online. While this may not be the most precise way of identifying your faucet, it can often work if you’re able to find an exact match for the parts you need.

Ultimately, these methods should help you to identify your faucet model. If all else fails, then you can bring your faucet to a plumbing or hardware store and speak to a knowledgeable staff member who should be able to help you out.

Do all Moen faucets use the same cartridge?

No, not all Moen faucets use the same cartridge. Moen manufactures a wide range of faucets, including models for the bathroom, kitchen and shower, and each of these may have different cartridges. Although some cartridges are universal and may be used on multiple faucets, other faucets may require a unique cartridge.

It is important to identify the exact model of a Moen faucet in order to determine the specific cartridge needed. The easiest way to do this is to check the faucet’s packaging or its identification markings, which are usually located somewhere on the faucet itself.

When ordering a cartridge for a Moen faucet, it is best to use the exact part number or name to make sure that you are getting the right one.

Does Moen have a lifetime warranty on their faucets?

Yes, Moen does have a lifetime warranty on their faucets. This warranty covers all Moen products, including kitchen and bath faucets, showerheads, accessories, and garbage disposals. As part of the warranty, Moen will replace any product that is defective due to manufacturing or material defects.

The warranty also covers parts of Moen products. In some instances, Moen may choose to repair the product instead of an exact replacement. In addition, Moen provides a limited lifetime warranty on Moen cartridges, which are covered by an extended limited lifetime warranty when installed in a Moen product.

In either case, Moen requires proof of purchase to verify warranty coverage.

How long should a Moen faucet cartridge last?

Moen faucet cartridges should last between two to five years, depending on how often they are used and the water conditions they are exposed to. If you live in a hard water area and use them frequently, they may need to be replaced more often.

A Moen Faucet with a 1225 Plastic Cartridge should last up to five years with basic care, while a 1258 Brass Cartridge model can last up to ten. Ultimately, the life of your Moen faucet cartridge depends on how you maintain it and the usage conditions it is exposed to.

Periodic maintenance is a key factor in keeping your faucet functioning as new for as long as possible.

How do I know if I have a Moen 1222 or 1225?

To determine if you have a Moen 1222 or a Moen 1225, you should first look closely at the cartridge stem (the small cylinder) of your faucet. If the stem is stamped “Moen 1222” then it is a 1222 cartridge.

If the stem is stamped “Moen 1225” then it is a 1225 cartridge. Of course, this assumes that the cartridge you have installed is the original one, and has not been replaced.

If the cartridge does not have the number printed on it, or you are unable to remove the cartridge for some reason, the next step is to take a look at the packaging of the cartridge. Many times the number is printed on the package or included in the product description.

You can also try searching the number online, to see if there are any product listings or images that can help you identify the cartridge.

If you are still unsure whether your faucet utilizes a Moen 1222 or a Moen 1225 cartridge, you should contact Moen directly with the model number of your faucet. Moen has support representatives available who can help you identify the right cartridge for your particular faucet.

Can you replace a Moen cartridge without turning off the water?

No, it is highly recommended that you turn off the water supply before attempting to replace a Moen cartridge, as doing this will help to prevent water damage. When replacing a Moen cartridge, it is best to turn off the main water supply to the house to be sure that all water is off, and then turn off the water faucet that is connected to the Moen cartridge.

Once both of these have been done, you can then begin the process of replacing the Moen cartridge. If the water supply is still on while replacing the cartridge, the exposed parts of the plumbing may suffer water damage, which could result in leaking.

Additionally, it is possible for the Moen cartridge to break due to a water pressure spike, leading to water flooding the area. For these reasons, it is important to make sure the water supply is turned off before attempting to replace the Moen cartridge.

How do you replace a Moen 1225 single handle cartridge?

If you need to replace a Moen 1225 single handle cartridge, the process for doing so is relatively straightforward. You’ll need to begin by turning off the water supply to the faucet and then removing the faucet handle by taking off the set screw and pulling the handle straight up.

Once you’ve removed the handle, take off the retaining clip and then remove the bonnet nut and the inserting itself. At this point, you’ll be able to remove the old cartridge and replace it with the new one.

Make sure to ensure a tight fit and then replace the inserting, bonnet nut, and retaining clip. Reattach the faucet handle and then turn on the water supply. Lastly, check to make sure the water is flowing properly and that the new cartridge is operating correctly.

What does Moen 1225 cartridge fit?

The Moen 1225 cartridge fits a variety of Moen single-handle kitchen and bathroom faucet models including some from both their chateau and posi-temp collections. It is intended to replace even older Moen cartridges, such as the 1070 and 1167.

This cartridge also has a longer life than comparable models due to its durable design and its ability to reduce the amount of wear and tear that usually occurs with repeated use. The Moen 1225 is also adjustable to fit a greater range of water pressure to ensure that you always get the perfect amount of water flow.

This cartridge is designed to fit Moen faucets without the need for any additional parts or adapters, so it is ideal for a quick and easy replacement.

What is the difference between Moen 2 Series and 3 Series?

The Moen 2 Series and 3 Series are two product lines of dependable and convenient motion sensing faucets. There are several differences between the two product lines.

In terms of design and affordability, the 2 Series is slightly more basic and its models are more cost-effective than the 3 Series. The 2 Series is available in fewer finishes and styles than the 3 Series, and its models do not include some of the special features that 3 Series models do.

However, all 2 Series models come with Moen’s WaveTM Activation technology, allowing users to operate their faucet with a simple wave of their hand.

The 3 Series is slightly more expensive than the 2 Series, but it offers several exclusive features to make it worthwhile. This product line also features advanced WaveTM Activation technology, and comes with additional features that detect the presence of an object and turn the water on and off.

In addition, 3 Series models send notifications to users’ phones when the faucet senses motion, and they come with Moen’s self-cleaning technology to keep them sparkling clean. The 3 Series is also available in more finish and style options.

While both 2 Series and 3 Series models offer great convenience, durability, and style, the 3 Series is the better option for those who want the latest technology and access to additional features.

How do I check my serial number?

To check your serial number, you will need to locate the product label that should be affixed to the product itself. On this label, you will find the serial number printed or stamped onto the label. The serial number may also be referred to as the ‘Product Number’, ‘Model Number’, or ‘Part Number’, and will typically be 12 digits long.

If the product has a digital display, the serial number may also be displayed on the screen. If you can’t find the label, it may have been removed or it may be located on an area of the product that is not easily seen.

You can also find the serial number in product documentation such as the user manual or warrantyguide. Additionally, if the product is registered, you can find the serial number on the receipt that came with the product or in the company’s records.

Do faucets have serial numbers?

Yes, faucets do have serial numbers. Depending on the manufacturer, these may look different. Many different sensor faucets feature a serial number on the bottom or side of the spout, which can be used to identify the unit and help trace its history.

These numbers are generally used to identify the design of the model, the production and assembly dates, and the specific unit to which it was produced and/or delivered. Additionally, some faucets may also feature model or product numbers and/or their own individual codes that could be used to track the history and usage of each specific faucet.

Are faucet cartridges interchangeable?

The answer to this question is: it depends. In general, faucet cartridges are designed for a particular faucet model and cannot be interchanged. This is because the cartridge is typically specific to a specific brand and model of faucet.

However, some manufacturers do design their cartridges to be interchangeable between different faucet models, so it is always best to check the manufacturer’s specifications to confirm whether the cartridge you have is indeed interchangeable with another model.

Additionally, some specialized manufacturers may have a universal cartridge that can be used on multiple brands and models, but this is not the norm.

How do I know which Delta faucet cartridge I need?

In order to know which Delta faucet cartridge you need, you’ll need to first identify the model number of your Delta faucet. This can usually be located on the faucet’s body or on a small plate attached to the faucet.

Once you’ve identified the model number, go to the Delta website and type the model number in the search bar on the main page. This will bring up a list of all the parts needed for the faucet along with part numbers.

Look for the cartridge in the list and then make a note of the part number. You can then use that part number when purchasing the replacement cartridge.

If you’re having trouble finding the model number or part number, don’t hesitate to call Delta’s customer service line. They will be able to help you identify the correct cartridge you need.

What cartridge is used in a Delta Monitor shower faucet?

The Delta Monitor shower faucet utilizes a 1700 series cartridge. It is a single lever, single-function cartridge offered in a variety of finishes to coordinate with your shower fixtures. The single lever is used to turn the water on and off as well as to adjust the temperature.

The 1700 series cartridge is also available in temperature-only models, where the single lever adjusts only the temperature of the shower. It is a high-quality, durable cartridge that is composed of metal and plastic parts and is corrosion-resistant for long-lasting performance.