Skip to Content

Where is model number for toilet?

The model number for a toilet can usually be found on the back of the tank, near the top. In some cases, the model number may be located on the underside of the toilet tank lid or molded into the side of the toilet bowl beneath the seat.

The model number may also be etched into a label that is affixed to the toilet bowl or one of its components. If you cannot locate the model number within these areas, you may need to remove the toilet tank and check the inside bottom of the tank.

The model number information should be listed on the side of the tank.

How do I find the model number of my Kohler toilet?

The model number of your Kohler toilet can usually be found on a sticker located on the back of the toilet near the top or the bottom. This sticker will include the model number and serial number of the toilet.

If you have a standard floor-mounted toilet, the manufacturer’s information is often found on the back of the tank. If the sticker or manufacturer’s info is not visible, you can also look underneath the toilet where the tank connects to the base.

This is where you will very likely find the model and serial number. You can also look inside the tank near the top, as the manufacturer’s information can be stamped directly on the tank. If you cannot find the details of your toilet in any of these places, you can also contact Kohler directly for assistance, who will be able to provide the information you need.

How do I know what kind of Kohler toilet I have?

To determine what kind of Kohler toilet you have, you will need to do a bit of detective work. First, you will need to find the Kohler model number of your toilet. The model number is typically located on the underside of the toilet’s lid or tank.

Alternatively, it may be printed on the back or side of the toilet bowl.

Once you have the model number, it is fairly easy to find out what type of Kohler toilet you have. You can find the model number on the manufacturer’s website or contact their customer service department.

You can also try searching online using the model number, which should return a list of product specifications, including the type of Kohler toilet you have.

If you are still having trouble identifying your Kohler toilet, you may want to take a picture of it (including any identifying markings) and post it on a home improvement forum. Many people in the DIY community have extensive knowledge about different kinds of toilets and can help you identify yours.

How do I find my Kohler part number?

If you need to find the part number for a Kohler product, the best place to start is by looking at the product’s packaging, manual, or othe documentation that came with it. The part number should be printed on it somewhere.

If you don’t have any documentation, you can also find the part number by entering the model number of the product into Kohler’s website. Once you have entered the model number, you should see a list of parts and their corresponding part numbers.

If you still cannot find the part number, you may need to reach out to Kohler Customer Service for additional assistance.

Is KOHLER a lifetime warranty?

No, while Kohler products do come with a limited lifetime warranty which covers defects in materials and workmanship, it does not extend to the “lifetime” of the product. Instead, the warranty on Kohler products lasts for a period of one year from the date of purchase.

In addition, components and materials used in their products may have warranties that are for different durations. Furthermore, certain exclusions apply and there may be certain limitations. As with any warranty, it is best to read the details and make sure that you have a thorough understanding of the warranties and limitations on any product purchased from Kohler.

Is my toilet 10 or 12?

Unfortunately, without specific information about the toilet you are inquiring about, it is difficult to provide an accurate answer. Generally speaking, the size of a toilet is measured in inches from the floor to the bowl rim and is typically 10 or 12 inches tall.

Additionally, while most toilets are around 11. 5-12 inches tall, some manufacturers produce comfort-height models that are up to 16 inches tall. If you have the make and model of the toilet you are asking about, you may be able to locate the dimensions online.

If not, you may consider measuring the toilet using a ruler to provide a more precise estimation.

How do I know if I have a 2 inch or 3 inch toilet?

To know whether your toilet is a 2 inch or 3 inch toilet, you need to measure the diameter of the toilet outlet. To measure the outlet, you will need a tape measure and some type of container that is able to measure the distance between the outside of the toilet outlet and the edge of the container.

If the diameter of the outlet is between 2 and 2 1/4 inches, it’s a 2 inch toilet. If it’s between 2 1/4 and 3 inches, it’s a 3 inch toilet. You can also look up the make and model of your toilet online, as this should specify the size of the toilet.

Additionally, if you recently purchased your toilet and there’s a label on the underside of the tank indicating the size, you can look there as well.

Can you mix and match toilet bowls and tanks?

Yes, you can mix and match toilet bowls and tanks. Most toilets consist of two main components – the bowl and the tank. While the bowl shape and size are fixed, you can select from a variety of tank styles and colors.

Generally, tank styles come in either round or elongated shapes and can either be a single piece or two pieces (tank and lid). When selecting a toilet tank and toilet bowl, it is important to ensure that they are from the same manufacturer and series to ensure a proper fit.

Additionally, the tank may also need to include additional parts such as a flush valve or tank to bowl gasket. It is best to consult the manufacturer’s installation instructions to ensure that you select compatible components when mixing and matching toilet bowls and tanks.

How do you fix a Kohler toilet that keeps running?

To fix a Kohler toilet that keeps running, you will need to adjust the fill valve. First, shut off the water supply to the toilet. Then, remove the top of the toilet tank and locate the fill valve. There should be a small tab on the bottom, sliding it up and down will adjust the water level in the tank.

If the valve is completely open, meaning that the water level is too high, this can cause the tank to run. In this case, adjust the tab to lower the water level until the running stops. Once the running stops, replace the tank cover and turn the water back on.

What are Kohler Class 5 toilets?

Kohler Class 5 Toilets are one of the most efficient and advanced flushing systems on the market. Class 5 flushing technology features an internal Vortex flush system that uses 4. 8 gallons of water per flush.

This incredibly efficient and powerful flush system uses a double cyclone technology to create centrifugal force and an even distribution of pressure to the bowl. The flushing system also utilizes centrifugal force to enhance the pull-down effect for a complete flush, and the built-in rim does all the hard work for you.

TheClass 5 Flushing System is designed to tackle the toughest flushing jobs and get them done all at once, making it an ideal choice for high-traffic restrooms and other commercial settings. The Kohler Class 5 flushing system is one of the most powerful on the market, providing ultra powerful flushing and outstanding water conservation.

Can you use a universal flush valve on a Kohler toilet?

Yes, you can use a universal flush valve on a Kohler toilet. The universal flush valve is designed to work with a variety of toilets, including Kohler toilets. This type of valve works by replacing the flush valve inside the tank, which is connected to the fill valve.

The universal valve can be easily installed and comes with instructions and the necessary tools for installation. Before installing the valve, it is important to verify compatibility with your toilet model.

Additionally, it is important to follow all safety precautions and installation instructions that come with the valve.

Is there an app to identify plumbing parts?

Yes, there is an app to identify plumbing parts. The app is called PlumbFitter and it is available on both the iTunes App Store and Google Play Store. With the PlumbFitter app, users can accurately identify more than 300 common plumbing parts, valves and fixtures.

The part identification process is simple; users take pictures of a part, drag and drop labels on the image and submit. Then, the PlumbFitter app will use the image and labels to analyze the part, verify it against manufacturer specifications and provide a detailed description, including the manufacturer name and part number.

Additionally, PlumbFitter provides cross-referencing of manufacturers and other supplementary plumbing-related services.

How do I identify my faucet parts?

Identifying your faucet parts can be a tricky task, depending on the age and model of your faucet. The easiest way to identify your faucet parts is to take pictures of the parts and take note of the model number and parts that are on the unit.

If you do not know the model of your faucet, first look at the manufacturer’s logo or name plate usually found on the faucet handle or under the spout. Once you have determined the manufacturer and model of your faucet, you can then refer to online part diagrams or the manufacturer’s website in order to identify the parts.

If the part looks unusual and does not match any diagrams online, it may be best to take the part to a hardware store for identification or consider replacing it entirely.

Are all toilets 12 inches from wall?

No, not all toilets are 12 inches from the wall. The distance from the wall to the toilet bowl will vary depending on the style and model of the toilet. The largest factor in toilet placement distance from the wall is typically the type of toilet flange that is being used.

If a standard toilet flange is used, then the toilet will typically be about 12 inches from the wall; however, non-standard toilet flanges may require the flange to be set further back from the wall, in which case the toilet will be further back from the wall as well.

To ensure proper installation, it is important to always measure and check the distance of the toilet from the wall before installing it.

What is the standard size of a toilet?

The standard size of a toilet is approximately 28-30 inches from the floor to the top of the seat. The width of the toilet bowl at its widest point is typically 14-16 inches, and the distance from the wall to the center of the toilet bowl is generally nine to twelve inches.

The standard height of a toilet bowl from the floor is about 15 inches. The height of the flush handle is typically between 17 and 19 inches. These measurements refer to the standard sizes for toilets, but may vary slightly depending on the make and model.