Skip to Content

Where should niches go in shower?

Niche placement for showers depends on a few factors, including the size of the shower, the desired aesthetic, and the desired accessibility. If space and budget allow, it’s ideal to install multiple niches in the shower for a functional, polished look.

Depending on the shower size, the niches should be placed higher up in the shower, within easy reach. If a larger niche is desired, it should go higher up near the ceiling so it doesn’t take up too much room.

Multiple niches may all be placed near the ceiling or at various heights, as long as they are within easy reach.

In terms of aesthetic, a niche should be installed in an inconspicuous area or integrated into the shower tile so it fits cohesively with the overall design. If possible, the niche should be installed in the wall to appear flush against the tile.

For greater accessibility, install the niche at an appropriate height. Standard shower niches are around 18 inches tall, and taller people may want to consider a higher installation. It is important to keep the niche away from drains, shower knobs and other pipes for better access.

Overall, the best place for a niche in the shower is in a discreet spot within easy reach, with enough space between the niche and any obstructions.

What side should a shower niche be?

A shower niche should generally be located on the longest wall in the shower/tub area. This will usually be the side wall that faces the faucet, but depending on the layout of your bathroom, it could also be located in different areas.

Ideally, a shower niche should be placed between shoulder and eye level to make it easily accessible. If you have a bathtub in the room, the niche should not be too close to the edge so that it doesn’t get splashed by the water.

Additionally, you should leave an inch of gap between the shape of the niche and any water outlets or sources so that water doesn’t seep into the wall. Lastly, when measuring and designing your niche, consider including an drain for drainage to prevent water buildup.

How far from shower floor should a niche be?

The exact distance from the shower floor to the niche will depend on the size of the niche and the height of the shower walls. Generally speaking, the optimal mounting height for the niche should be between 15-18 inches from the floor.

If you are wanting to place the niche at a higher or lower height, that can also be done. The important consideration is making sure the niche is accessible for cleaning and also to minimize splashing from the shower onto the niche shelves.

The mounting studs of the niche should also be securely fastened into the studs of the shower wall.

Which wall is for shower niche?

The ideal wall for installing a shower niche is typically the back wall, which contains the plumbing fixtures. This is because the niche can be incorporated into the existing tile, and can hold a variety of items such as shampoo, conditioner, and body wash.

By installing a shower niche towards the back, it is out of sight, so that it doesn’t take away from the aesthetics of the bathroom. Additionally, it is less likely to get damaged by staying near the plumbing fixtures.

The other option is to install a niche on a side wall of the shower. This works especially well in open shower designs as the niche is visible. This can add to the design of the shower, and it can even provide additional storage.

Are shower niches a good idea?

Yes, shower niches are a great idea for your bathroom! They provide a space to store toiletries and other items, such as shampoo, conditioner, and body wash, without taking up too much space. They also help to keep your shower neat and organized.

Additionally, they provide the perfect place to display decorative items such as candles, crystals, and plants. Not only do they enhance your shower experience, they also add character to your bathroom.

Furthermore, they are fairly inexpensive and easy to install, which makes them a great, cost-effective way to update and refresh your bathroom.

Where do you start tiling a shower with a niche?

When tiling a shower with a niche, the best place to start is with the walls. Before beginning installation, you should apply a thick layer of mortar to the back wall and make sure it is firmly secured.

You can then begin laying the tiles over the mortar, starting from the bottom and working up to the top. Once this is complete, you can begin tiling the other walls in the shower. If the shower includes a niche, it is essential to make sure it is properly waterproofed before installing the tiles.

This can be done by using a waterproof membrane or filling the space with grout. Once all of the walls are tiled and the niche is waterproofed properly, you can then move on to the floor.

Should a shower niche be a different tile?

Yes, a shower niche should be a different tile. This is to create an eye-catching design element while also protecting the niche and its contents from the moisture of the shower or bath. Niche tile should be installed first and then the remaining shower field should begin.

A niche tile can be any tile, such as a subway tile, stone tile, or decorative mosaic tile. It is important to choose a tile that is resistant to water and easy to clean. It should also complement the overall look of the shower or bath.

Depending on the look you are going for, the niche tile can be the same size as the field tile or a larger tile to create contrast. Keep in mind that all grout should be sealed to prevent water damage and mildew growth.

What should be tiled first in a shower?

When tiling a shower, it is important to start at the base and work your way up. The first step is to prepare the area for tiling by removing any existing tiles, plaster, and other debris. Next, you will want to spread a concrete-based mortar, also known as thinset, over the entire area that is to be tiled.

Make sure to use a notched trowel to evenly spread the mortar, allowing it to set properly before moving onto the next step. Once the mortar has been spread, you can begin to install the tiles. Start at the bottom of the shower, and work your way up, making sure the grout lines are even and the tiles are flush against each other.

Once the tiles are all in place, use caulk to seal the perimeter around the tub or shower pan, as well as to fill any visible gaps between the tiles. Finally, grout the tiles with a water-resistant, mildew-resistant grout, and then seal the grout lines with a sealant to protect against water and debris.

How do you layout a tile niche?

The first step in laying out a tile niche is to properly measure and mark out the area where the niche is going to be installed. It is important to make sure that the measurements are exact and that the walls surrounding the niche are plumb.

Once you have the space marked, you can begin laying out the tile for the niche. It is important to use spacers between each tile, which will help keep the tiles uniformly spaced and level. Once the tiles are laid out it is important to apply tile mastic or thinset mortar with a notched trowel to the back of each tile before placing them into the niche.

Once you have the tiles installed in the niche, you can begin to grout and seal any corners or gaps. Once the grouting and sealing are complete, you should have an attractive and functional tile niche.

Which shower wall gets tiled first?

The first wall that should be tiled in a shower is the back wall. This is because it’s the largest and most visible wall, and it sets the tone for the rest of the tiling job. It’s also important to make sure the back wall is level and square.

Once the back wall is tiled, then the side walls can be tiled going from the back wall out to the corners. It is important to stagger the tiles for a clean, professional finish. Next, install the niche and finish tiling the side walls.

After that, the ceiling can be tiled from the back wall forward. Finally, the floor can be installed, including the linear drain. While installing the floor tiles, it is important to trowel the thinset carefully to create a flat and level surface.

Is shower niche expensive?

A shower niche is a dedicated space for toiletries, allowing for items to be placed conveniently in a shower space. Depending on the materials and the design, shower niches can range in cost from moderate to expensive.

For instance, pre-fabricated shower niches can cost as little as $150 dollars, while customized niche installations can cost upwards of thousands of dollars. Ultimately, the cost really depends on the materials used, the design, and the desired features (whirlpool jets, LED lighting, etc).

If you’re on a budget, opting for a pre-fabricated shower niche may be the better option, whereas if you’re looking for a high-end niche, customizing the space may be better.

How do I keep my shower niche clean?

Maintaining your shower niche clean is an essential part of keeping your bathroom clean. Here are some tips to help you keep your shower niche clean and looking fresh:

• Choose a mild cleanser or soap that is gentle enough for your shower niche. A soft cloth or sponge should be used to apply the cleanser or soap, and then rinsed away with plenty of clean, warm water.

• Use an appropriate scrub brush or a toothbrush to scrub away any stubborn dirt or grime from the shower niche. Rinse away any cleanser or soap, and then dry the area with a soft cloth or towel.

• Remove any soap scum or calk residue from your shower niche using a mild vinegar solution. Make sure not to mix the vinegar solution with anything else, as this can cause a corrosive reaction.

• Clean your shower niche regularly. This will help keep it looking shiny and new and will also help prevent any mould or mildew from growing.

• If desired, you can apply a sealant or wax to your shower niche which will act as a protective barrier against mold and mildew.

• Consider putting a drain cover in your shower niche. This will help keep out dirt and debris, helping to keep it clean.

Following these tips will help keep your shower niche looking clean and fresh. It is also important to remember to keep the surrounding area of your shower clean. Regularly wiping down the walls and surfaces with disinfectant will help ensure your shower remains in top condition.

How much does it cost to install a niche in a shower?

The cost of installing a niche in a shower can vary drastically depending on the size and shape of the space, type of niche being used, and the local labor costs for installation. Generally speaking, installing a niche in a shower will cost about $150 to $400 for a painted metal, premade recessed niche.

If you want additional features such as custom tile trim and a design, this can increase to $400 and up. The cost of installing and tiling a completely custom niche can be significantly more, easily going into the thousands.

It’s important to get the assistance of a professional and ensure proper fit and compatibility with your existing plumbing and shower, as custom work may require additional parts and labor.

Do you have to waterproof a shower niche?

Yes, it is important that you waterproof a shower niche in order to ensure that the wall cavity behind your shower niche remains protected from moisture. Waterproofing the niche will ensure that water does not leak into the walls behind your tiles and cause damage.

Such as sheet-applied waterproofing membranes, liquid waterproofing membranes and waterproofing trowel applied to the walls. Before beginning any waterproofing process, it is important to double check the substrate and walls around the niche to make sure they are in good condition and ready to receive the waterproofing material.

It is also a good idea to make sure that any waterproofing material you use is compatible with your existing shower tile installation. After the waterproofing is complete, it is important to use a high quality sealant around the edges of the niche in order to provide an additional layer of protection.

Does a shower niche need trim?

Trimming a shower niche is not always necessary, but it is a great way to add a detailed finish and professional look when installing a recessed shelf or other shower niche. The type of trim you choose may depend on a variety of factors, ranging from style preferences to the size and shape of the niche.

For example, a smaller niche may require a slim tile trim piece or a traditional bullnose edge. Consider stainless steel, stone, marble, or ceramic trims to match the style of your bathroom. Even if you don’t want to trim the niche to the walls, covering any exposed corner is still recommended for safety and appearance.

Exposed tile edges can also be easily concealed using grout or caulk, although it’s important to keep the joints and seams sealed tightly for water-tight construction. With the proper trim in place, your shower niche will look professional and add an extra layer of safety and style to your bathroom.