The owner of Bathfitters is a company called NeuroDesigns, Inc. They are based out of Millford, Connecticut. NeuroDesigns was founded over 30 years ago in 1987 by Vice President and owner, Barry Kassof.
The company specializes in custom “one day” bathroom remodels, using their proprietary products and services. Through their turn-key solutions, the company strives to make the process of remodeling bathrooms as easy and stress-free for the customer as possible.
NeuroDesigns, Inc is best known for their Bathfitters branded products and services. They are continuing to expand, bringing their solutions to all 50 states as well as international markets.
Where is Bath Fitter headquarters?
The headquarters of Bath Fitter is located in Wilkes Barre, Pennsylvania. Founded in 1984, Bath Fitter is the North American pioneer in bathtub and shower remodeling, serving over three million customers since the company’s founding.
Today, Bath Fitter offers a full range of bathroom remodeling products and services, making bathroom transformations simple and affordable. The company’s showroom and headquarters is located on North Wilkes Barre Blvd.
in Wilkes Barre, and serves as the nerve center of operations for Bath Fitter’s 18 manufacturing centers, as well as its more than 140 showrooms located throughout the United States and Canada. The company’s headquarters also serves as a customer service center and provides support services to their professional installers.
What is the average cost of a Bath Fitter conversion?
The average cost of a Bath Fitter conversion depends on the size and scope of the project, as well as the materials and the specific location of the work. Generally, a basic tub-to-shower conversion can range from $2,000 to $3,500 and beyond.
For more complicated projects, such as a full remodel of a bathroom, the cost can easily reach upwards of $7,000 or $8,000. Additionally, the specific types of materials used (e. g. tile, fixtures, etc.
) can significantly impact the overall cost. Furthermore, the cost of installation will vary based on the location of the work; prices tend to be higher in more populous or dense areas. Finally, Bath Fitter offers a variety of financing and payment options to help spread out the cost, but this can further drive up the total cost of the conversion.
How long do Bath Fitter tubs last?
Bath Fitter tubs are made from durable acrylic that is resistant to everyday wear and tear. This makes them a long-lasting investment for your bathroom. With proper care, the acrylic finish of the tub will last for many years, making the overall life of a Bath Fitter tub much longer than other tubs.
Additionally, Bath Fitter uses a proprietary adhesion system to guarantee the seal between the tub and the wall, meaning that your tub will not leak as long as it is well maintained. With both the acrylic finish and seal intact, Bath Fitter tubs can last for up to 15 years or longer.
How many Bath Fitter locations are there?
There are over 70 Bath Fitter locations across the United States and Canada. In the U. S. , they are located in 30 states including Alaska and Hawaii. The states with the most locations are Illinois, Pennsylvania, New Jersey, Massachusetts, and Maryland.
In Canada, Bath Fitter has locations in British Columbia and Ontario. In addition, the company has a network of professional and independent sales reps that extend their coverage to all of the provinces in Canada as well as parts of Mexico and Central/South America.
Bath Fitter also has an online store with an array of products, from shower liners to full bathtub and shower renovations styled to match your home’s current design.
Does Bath Fitter cause mold?
No, Bath Fitter does not cause mold. Bath Fitter offers solid-surface bath products that are not absorbent, so they are resistant to mildew, mold, and bacteria. All of our baths, showers, wall systems, and tub surrounds are made with a 100% non-porous acrylic surface that seals out moisture, preventing mold and mildew from forming.
Additionally, all of our products come with a lifetime guarantee against cracking, peeling, fading, and discoloration due to mold or mildew. This guarantee is backed by a Silver Shield™ lifetime limited warranty, so you can trust your Bath Fitter products to remain free from mold and mildew, no matter the environment.
What is an alternative to Bath Fitter?
An alternative to Bath Fitter could be a company such as Re-bath, which specializes in bathtub and shower remodeling and replacement. Re-bath offers remodeling solutions that can be completed in as little as one day, and includes options such as bathtub liners, shower replacement and wall surrounds.
Additionally, Re-bath has a wide variety of customizable options, styles and colors so that customers can create the perfect look for their bathroom. Re-bath also offers professional installation services and a limited lifetime warranty, ensuring that customers receive a product that is built to last.
With their selection of products and customization options, Re-bath is a great alternative to Bath Fitter.
How often should tubs be replaced?
The frequency with which bathtubs are replaced depends on a variety of factors, including the type of material they are made of and the location in which they are situated. Generally, bathtubs should be inspected and serviced regularly to ensure they are in safe working condition and to repair any damage that may have occurred.
For tubs made of fiberglass, acrylic, or similar materials, it is recommended to replace them every 10-15 years if they are exposed to daily use. However, if they are in a powder or guest bathroom and only used occasionally and well-maintained, they could last up to 30 years or more.
For cast iron or steel tubs, it is best to replace them every 15-20 years because these materials tend to develop rust, chips, and fractures with age. If kept properly serviced and repaired, however, they can last much longer.
For clawfoot tubs, ceramic tile-covered cast iron tubs, and wooden tubs, it is best to consider replacing them every 20-25 years, unless they are in excellent condition and only used for short periods of time.
In short, the frequency of replacing a tub depends largely on the type of material and where it is located. However, all tubs should be inspected and serviced regularly to help maintain their structure and increase their life expectancy.
Can you use magic eraser on Bath Fitter?
No, you should not use a Magic Eraser on a Bath Fitter product. This is because the Magic Eraser contains abrasive ingredients that could harm the glossy finish of the acrylic material. Instead, you should use a non-abrasive cleaner suitable for nonporous surfaces, such as warm water with mild dish detergent.
To clean Bath Fitter showers and walls, use a non-abrasive soft cloth or sponge, and rinse with clear water afterwards. Avoid using steel wool, scouring pads and other abrasive materials, as these could damage the acrylic finish.
Additionally, refrain from using chemical cleaners that contain bleach, abrasive powders, and/or abrasive detergents as these can damage the acrylic finish or cause discoloration. It is best to refer to the manufacturer’s cleaning instructions for additional help on cleaning Bath Fitter products.
Does vinegar damage acrylic tubs?
No, vinegar does not damage acrylic tubs. Acrylic is a very tough and durable material, making it typically quite resistant to damage. While vinegar is an acidic solution, it is also relatively mild and therefore poses no risk of damage to acrylic tubs.
Cleaning an acrylic tub with vinegar is an effective and safe method of removing dirt, soap scum, and limescale. Simply add a cup of white vinegar to a basin of warm water and scrub the tub with a sponge or cloth.
You may even find that this method does a better job of removing stubborn messes better than chemical-based cleaners. However, it is important to rinse the tub thoroughly with clean water once all residue has been removed to ensure that no vinegar residue is left behind which may corrode the tub over time.
Is it cheaper to resurface or replace a bathtub?
The answer to this question depends on a few variables. Generally, if the bathtub is in good structural condition but is showing signs of wear such as cracks, chips, discoloration or an outdated design, resurfacing is likely the more cost-effective option.
The process of resurfacing includes cleaning, priming and smoothing the surface of the tub with a special material that makes the finish look new again and is generally less expensive than replacing the bathtub.
If the bathtub is in very poor condition with extensive damage that can’t be fixed through resurfacing, or if it is a style that you don’t like, then replacing it may be the best option. Replacing the bathtub can often be more costly overall than resurfacing depending on the type of bathtub and features you choose, but it will provide a more updated look and extend the life of the tub.
Before making a choice between resurfacing or replacing the bathtub, you should consult with a professional who can assess the condition of the tub and make a recommendation. They can also provide an estimate of the cost of each option so you can make an informed decision.
Why is my Reglazed tub peeling?
There could be several reasons why your reglazed tub is peeling, but the most likely culprit is incorrect preparation prior to the reglazing. Without proper cleaning, sanding and priming, the glaze may not be able to properly bond to the surface of the tub.
Poor quality glazing materials can also cause peeling and cracking. Additionally, if the glaze wasn’t allowed to dry and cure long enough, it may not adhere properly. If you reglazed the tub yourself, it could be helpful to double check that all the prep work was done correctly and that the glaze was applied according to the manufacturer’s instructions.
If you had a professional reglaze the tub, you may want to contact the company to discuss the issue and ask for a repair or possible replacement.
How much does a Bath Fitter tub to shower conversion cost?
The price of a Bath Fitter tub to shower conversion varies greatly depending on factors such as the size of the tub, materials chosen, type of shower hardware and fixtures, and labor costs. Generally speaking, the average cost of a tub to shower conversion with Bath Fitter is between $2,000 and $4,000.
This price range usually includes the installation of a new shower base, a pleated shower door or curtain, and a choice of wall panels and accessories. For larger, more extravagant remodels with higher quality fixtures, the cost can increase significantly.
This is why it is important to contact a Bath Fitter representative to discuss your project, as they are able to provide you with a customized estimate and budget options based on your needs.
How much does it cost to remove a tub and install a walk-in shower?
The cost of removing a bathtub and installing a walk-in shower can vary significantly depending on several factors, such as the type and size of the tub, the type and size of the shower enclosure, and the scope of the project.
In general, the cost of removal and installation ranges from approximately $1,500 to $4,000 for a standard shower. However, for high-end or custom showers, the cost could go up to $5,000 or more. Costs may also vary depending on the type of fixtures, materials and labor involved in the project.
For example, a one-piece acrylic or fiberglass tub could cost around $300 to remove and would be less expensive than one with tile or stone floors. Additionally, some modifications like retiling the floor or adding new plumbing fixtures may incur additional expenses.
It is important to consult with a qualified contractor to get a better idea of the total cost of the project.
Is a tub to shower conversion worth it?
Overall, a tub to shower conversion can be a worthwhile investment as it can help to save space, provide additional functionality, and increase the aesthetic appeal of your bathroom. In terms of saving space, if you have a large bathtub that not many people use, converting it to a shower will help to create more space in the bathroom.
Additionally, showers tend to be lower maintenance than bathtubs and can provide a more luxurious experience with features such as multiple shower heads, built-in storage or seating, and tile designs.
Finally, a tub to shower conversion can add aesthetic value to a bathroom, as new fixtures and finishes can be chosen to match the design preferences of the homeowner. Therefore, depending on the circumstances, a tub to shower conversion can be worth it for both practical and aesthetic reasons.