Yes, it is possible to purchase just the toilet tank. The tank is the part of the toilet that holds the water and releases it during flushing. When you buy a toilet, the tank and bowl are normally sold as a set, but if you’re replacing an existing tank, it’s a possibility to just purchase the tank without the bowl.
Your old bowl could be kept and reused in most cases allowing you to just replace the tank. It can be useful to buy just the tank if you want to switch out the old tank with a different style but want to keep the same bowl and toilet seat.
In order to purchase just the tank, you should take the measurements of your existing tank, including the size and interfaces on the water line.
Are tanks for toilets universal?
No, tanks for toilets are not universal. Different toilet models require different tanks and they vary in design, size, color, and use. The size and shape of the tank depend on the type of toilet (ranging from round, elongated, and wall-mounted), while the color depends on the toilet’s design.
Additionally, some tanks are designed for basic flushing while others may have more advanced functions such as dual-flush, power-flush, or even one that uses a pressurized tank to send more water down with each flush.
When choosing the right tank for your toilet, make sure to check the manufacturer’s description to ensure it is compatible with the model you have.
Can you replace a toilet tank without replacing the bowl?
Yes, you can replace a toilet tank without replacing the bowl. The tank and the bowl of a toilet are two separate components which are usually both secured to the floor at the same time, so it’s possible to replace one without needing to touch the other.
To do this, start by shutting the water off and draining the tank. Then unscrew the bolts connecting the tank to the bowl, and lift it away. Installing the new tank is the reverse of this process. Make sure to use a wax ring when connecting the tank to the bowl, and to follow the manufacturer’s instructions (if applicable) for setting the fill and flush levels correctly.
It is also recommended to check the new parts for leaks prior to securing them in place.
How do I know what tank to buy for my toilet?
When it comes to purchasing a tank for your toilet, it is important to ensure that you purchase the correct tank size and model for your toilet. To ensure that you are purchasing the correct tank, you will want to measure the tank opening on your existing toilet by measuring the length, width, and height in inches.
Once you have the measurements for your tank opening, you can begin to shop for the correct tank. Many online retailers and home improvement stores will offer tanks in a range of sizes, so you can compare these to your measurements to make sure that you get the right one.
Additionally, you can look for the manufacturer’s tank information on the existing toilet to make sure you are purchasing the correct model of tank. Once you have a tank, you will need to make sure to connect the water supply and all components correctly.
This way, you can be sure that your tank will work properly and last for a long time.
Can any tank go on any toilet?
No, not all tanks can go on every toilet. Tank sizes can vary greatly depending on the type of toilet and the size of the bathroom where it will be installed. For example, a one-piece toilet may require a larger tank than a two-piece, and a larger room will likely require a larger tank than a smaller one.
Additionally, the height of the toilet and the shape of the tank can also affect which toilet it will fit on. There are also compatibility issues; some toilets will not work with certain brands’ tanks, requiring special adapters.
Lastly, some tanks may be too heavy or lack the necessary mounting hardware to fit on certain toilets. To ensure a compatible fit, it’s important to research your toilet and tank before making any purchases or attempting any installations.
Are toilet tanks standard size?
No, toilet tanks are not standard size. Toilet tanks can range in size depending on the brand, type, and model. For example, a high efficiency toilet tank may be much smaller than a traditional toilet tank because it does not require as much water.
An elongated bowl typically requires a longer tank than a round bowl. Generally, the widths of toilet tanks are between 16-20 inches and the lengths vary from 25-33 inches. Some brands offer adjustable tanks if the standard sizes won’t fit into your space.
How much does it cost to change a toilet tank?
The cost to change a toilet tank can vary depending on the type of tank and the work involved in the replacement. In general, the cost to replace a basic toilet tank (with basic parts) can range anywhere from around $150 to $325.
The cost of a toilet tank replacement may also vary based on the type of toilet tank you choose, whether it is a standard tank or a tank with extra features like a power flush. If you decide to upgrade to a more energy efficient model, this could add to your costs.
In general, these tanks will range from around $200 to $400.
In addition to the cost of the tank itself, the cost of a toilet tank replacement may also include any labor needed for the installation. This cost can range from $60 to $90 for basic installations. If your toilet tank requires additional work (such as replacing other parts associated with the tank), this may add additional time and cost to the overall job.
Finally, the cost of any extra material needed for the installation will also add to your overall cost. This could include any piping, connectors, and seals that are necessary for the completion of the job.
If purchased separately, these parts can range anywhere from around $25 to $50.
In summary, the cost of a toilet tank replacement can vary depending on the type of tank and the complexity of the job. Basic toilet tanks can range from around $150 to $325, while upgrading to a more energy efficient model may add up to $400 or more.
Labor and additional materials can add a cost of between $85 and $140 to the total, depending on the work involved.
What causes a toilet tank to crack?
Toilet tanks can crack due to a variety of reasons. Stress fractures, caused by water pressure, can build up and cause premature cracks in plastic or porcelain tanks. If a toilet tank is overloaded, it can develop cracks due to excess weight.
Cold weather can also cause plastic tanks to become brittle, leading to cracks. A continuous water hammer effect, caused by water pressure bouncing back and forth in the pipes, can also put pressure on the toilet tank and cause it to crack.
In some cases, a defective part, such as a flapper, can lead to a crack in the toilet tank. Finally, improper installation of the toilet tank could cause it to crack if the mounting bolts are not tightened properly.
When replacing an older toilet the new toilet can use no more than how many gallons per flush?
When replacing an older toilet, it is important to make sure the new toilet does not use more than 1. 6 gallons per flush (GPF). The federal government has mandated that new toilets not use more than 1.
6 gallons per flush due to federal water conservation standards. Many people are now opting for low-flow or dual-flush toilets, both of which use 1. 28 GPF or less for the full flush, and 0. 8 GPF or less for the partial flush respectively.
Low-flow toilets often have the best flush performance, while dual-flush toilets offer greater water-saving benefits than traditional toilets. In addition to the standard 1. 6 GPF, there are now ultra low-flush toilets that use as little as 0.
8 GPF, helping to further reduce water usage.
How do you flush a toilet with a broken tank?
If you have a toilet with a broken tank, the first thing to do is to turn the water valve off to stop water from entering the tank. Then, use a bucket or cup to slowly scoop out as much water as possible from the bowl.
After the water has been removed, you can use a snake or a plunger to force the water out. This should clear the toilet of any blockage and allow the water to drain from the bowl. If the water is still not draining, you can try to use a stir stick or a bent coat hanger to reach the blockage deep down inside the pipe.
Once the obstruction is cleared, the rest of the water should be able to discharge easily. If the water is still not draining, then you may need additional help from a professional plumber.
Can you just change the tank on a toilet?
Yes, you can replace the tank on your existing toilet, but there are a few steps you should take before you start. First, make sure to turn off the water supply line to the toilet, then flush the toilet to ensure there is no water in the tank.
Once the tank is empty, you can begin to disconnect the water supply line and remove the tank lid. Once the tank has been removed you can install the new tank onto the bowl with the bolts that are included and reattach the water supply line.
After the new tank is secured, you can fill the tank with water and test flush the toilet to ensure it is functioning properly.
Can cracked toilet tank be repaired?
Yes, a cracked toilet tank can be repaired. In most cases, a cracked toilet tank can be repaired with an epoxy or acrylic sealant. Before you attempt to repair it, you’ll need to assess the damage to determine whether or not it’s something you can fix yourself.
If the crack is small, up to a quarter of an inch, or the crack is in a non-structural part of the tank, the repair should be relatively simple. However, if the crack is larger than a quarter of an inch or the crack is affecting the structural integrity of the tank, you may need to replace the tank entirely.
Regardless, always turn off the water supply before attempting to repair the crack. Once the water is shut off, empty the tank and inspect it for any additional damage, for instance, a weakened rim on the tank.
If the damage is minimal and you decide to repair the crack, make sure to clean the area around the crack with soap and water and let it dry completely. Then, use a putty knife to apply the epoxy or acrylic sealant to the crack and let it dry.
If the crack is still visible, repeat the same steps a few more times to ensure the crack has been repaired.
Are all toilet tank Flappers the same?
No, all toilet tank flappers are not the same. Each toilet tank has a specific flapper size and shape, and depending on the model of the toilet and its manufacturer, the flapper design can vary. The difference between flapper designs can be based on size and shape, as well as materials and types of seals used.
To find out which flapper a specific toilet model uses, you should always check with the manufacturer for the best model for your toilet. Additionally, it is always important to use a flapper that is designed specifically for that model of toilet to ensure proper performance and to avoid any potential malfunctions.
How do you tell if your toilet is 10 or 12 inch?
If you are unsure if your toilet is a 10 or 12 inch model, you can measure it by starting with the distance from the wall or the bolt cap to the center of the hole located at the base of the toilet. A 10-inch toilet should measure at a length of 10 inches, while a 12-inch toilet should measure 12 inches.
Additionally, you can measure the toilet bowl itself. If the bowl has a round shape, measure from one side of the bowl to the opposite side of the bowl, then multiply by two. This should give you the diameter of the toilet bowl, and a 10-inch toilet bowl will be 20 inches, while a 12-inch bowl will measure 24 inches.
Once you have your measurements, you can then compare the measurements with toilet models online to be sure that you have a 10 or 12-inch toilet.
Is my toilet a 2 inch or 3 inch?
The size of your toilet is dependent on the type of toilet that you have. Generally, most toilets in the United States are 2-inch flush valves, though there are still some 3-inch valves in use. To determine which size you have, you will need to measure the size of the toilet outlet.
If you have an exposed hole in the bowl with a diameter of 3 inches, then it is a 3-inch flush valve. If the hole is only 2 inches in diameter, then it is a 2-inch flush valve.