Installing a Bemis toilet seat is fairly straightforward and doesn’t require any major tools. Here is the general installation process:
1. Begin by removing the existing toilet seat. To do this, locate the two screws or plastic nuts that are typically located on either side beneath the seat. Unscrew them with a flathead screwdriver or a socket wrench and the seat can be lifted off.
2. Place the new Bemis toilet seat onto the toilet bowl. Line up the holes where the screws or nuts attach the seat to the bowl and make sure the seat is balanced and level on the toilet before moving on.
3. Insert the bolts into the holes in the new seat and hand-tighten the two screws or nuts to hold the seat in place. If the bolts are too long, use a pair of pliers to snip them down to size.
4. Once the two screws or nuts are secure, tighten them a bit more with either a flathead screwdriver or socket wrench. If a plastic washer was included with the seat, use this to help secure the connection.
5. Finally, test the seat by gently pressing down on it to make sure that it is securely attached.
And that’s it! After that, your new Bemis toilet seat is ready to use. Be sure to follow the installation instructions as included, as some models may have minor variations in the installation steps.
How do you tighten a toilet seat with no access underside?
If you have a toilet seat that has no access underside, then you will need to find another way to tighten it. One of the solutions is to use a top-mounting toilet seat fixing kit. This kit will include a set of screws that can be used to secure the seat to your toilet bowl from the top.
To install the kit, you first need to place the bolts with the washers onto the underside of the seat, starting at the back and making sure that the bolts are facing downward. Then, you need to hand-tighten the screws to make sure that the seat is held in place.
After that, you can use a screwdriver and tighten the screws until everything is secured.
In addition, there are specialized toilet seats available in the market that offer a tool-free installation design, using a clip mechanism that latches it onto the bowl. This type of seat is designed to make it easy to tighten the seat without needing to use tools or having access to the underside of the seat.
Ultimately, whichever option you chose, if you have a toilet seat with no access underside, then you will need to opt for a top-mounting toilet seat fixing kit or a tool-free installation design in order to make sure that it is properly tightened.
How do I know which Bemis toilet seat I have?
To identify which Bemis toilet seat you have, the first step is to take a close look at your current toilet seat. Most likely, you will find either a Bemis logo or a number printed somewhere on the toilet seat.
For example, Bemis toilet seats may be labeled with the numbers 1000EC, 1750EC or 3000EC, which identify the width, shape, and color of the seat.
If you can’t find a number or logo on the toilet seat, the next step is to measure the length and width of your current toilet seat. If it’s round, measure the diameter. If it’s elongated, measure the length and width at the widest point.
Bemis’ website offers a size guide which can help determine which toilet seat you have. Additionally, if you no longer have the original packaging, you can also check Bemis’ website to see the product images of their toilet seats.
Once you’ve identified your toilet seat, you may want to consider replacing it with a new Bemis toilet seat to give your bathroom an update. Bemis’ website offers a vast selection of stylish, high-quality replacement toilet seats.
Do all toilet seats have the same fixings?
No, not all toilet seats have the same fixings. The type of seat and the type of toilet it is being attached to both play a role in what type of fixing you will use. Generally, a plastic toilet seat will have either a top-fix or bottom-fixing system.
Top-fix toilet seats have plastic bolts which have a nut-lock system for securing the seat onto the pan. Bottom-fix toilet seats have various screws that attach to fittings on a porcelain base where a toilet seats sits.
There is also a variation on the bottom-fix called a Easy Fit system which uses a spring and a sliding bar to secure the toilet seat. A wooden toilet seat usually uses a bolt-through system, where the seat is bolted through the pan, or a longer bolt and nut at the back of the pan.
No matter what type of toilet seat you have, make sure to follow the instructions carefully, as the bolts should always be hand-tightened to secure the seat in place properly and prevent it from slipping.
Where are the screws on my toilet seat?
The screws on a toilet seat are located underneath of the seat. They are typically concealed by a metal or plastic cap that is located at the front, left and right corners of the seat. To access these screws, you will need to use a flathead screwdriver to remove the cap and then unscrew the screws.
Depending on the make and model of the toilet, the screws may be different sizes. If you are unsure of the exact location or size of the screws, it would be best to consult the manufacturer of your toilet seat to confirm the information.
How do I remove Bemis toilet seat with hidden FIXS?
Removing a Bemis toilet seat with hidden FIXS can seem like a daunting task, but it can be done with the right tools and techniques. Firstly, you will need a flat head screwdriver or a specially made tool for unscrewing hidden FIXS.
Once you have the appropriate tool, locate the screw caps on the underside of the seat where the FIXS are hidden. Using the screwdriver, insert it carefully into the caps and rotate counterclockwise to loosen the screws.
Once the screws are loose, take out the caps, and remove the screws. Now, gently rock the toilet seat back and forth to break the seal and remove it from the toilet bowl. Finally, clean the surface of the toilet bowl and the underside of the seat before re-installing the new toilet seat.
What are the different types of toilet seat fittings?
There are three main types of toilet seat fittings:
1. Standard Toilet Seat Fitting: This is the most common type of toilet seat fitting. It is a flat plate attached to the toilet bowl and is secured in place by two screws. It is easy to install, but is not adjustable and may not fit all types of toilets.
2. Universal Toilet Seat Fitting: This type of fitting features a curved plate which is adjustable and can fit most types of toilets. It is secured in place by a single screw, making it easier to install.
3. Soft Close Toilet Seat Fitting: This type of fitting features a curved plate which is adjustable and contains dampers which limit the closing speed of the seat. It provides a soft closing motion, which can be very useful in bathrooms with children or elderly relatives.
These are the three main types of toilet seat fittings available. To choose the right toilet seat fitting, it is important to measure the size of your toilet bowl and determine the type which best meets your needs.
What are the two buttons on the back of a toilet?
The two buttons on the back of a toilet are typically a dual flush button or a lever. The dual flush button allows you to choose either a full flush or a half flush, depending on how much waste is in the tank.
The lever button works like a traditional flush, allowing you to release all of the water in the tank at once and start the fill cycle. Both types of buttons will usually be located on the rear of the toilet tank and may be accompanied by a small label indicating which type of flush it is.
How do you remove a toilet seat from Bemis easy clean?
Removing a toilet seat from a Bemis Easy Clean is a fairly straightforward process. The first step is to locate the screws that secure the seat to the toilet bowl. These screws will be located on the underside of the Bemis seat and will either be plastic or metal.
If they are plastic, they can be easily removed using a flat-head screwdriver. If they are metal, you will need to use a Phillips-head screwdriver.
Once you have removed the screws, you can gently lift the Bemis seat off the toilet. You may need to rock the seat from side to side to get all the way off of the toilet. Be sure to use caution and wear protective gloves, as the edges may be sharp.
With the seat removed, check that the screws and washers are still in good condition. If they are not, it may be a good idea to purchase new ones before you re-install the seat.
Once the screws and washers are in good condition, you can go ahead and install the new toilet seat. If you are replacing the Bemis Easy Clean seat with another Bemis Easy Clean seat, the installation process should be the same.
Put the screws and washers back in place, slide the seat down onto the toilet bowl, and tighten the screws. If you are using a different model, make sure to follow the model’s installation instructions.
Once the seat is properly secured, you are done!.
Are soft close toilet seats repairable?
Yes, soft close toilet seats are repairable. The main issue that may need to be addressed is a broken hinge. To repair a broken hinge, you will need to remove the toilet seat by removing the two plastic screws located on the underside of the seat.
Once the screws are removed, you can access the hinge to check for any damage. If the hinge is damaged, the hinge can be replaced with a new one. After the new hinge is installed, the toilet seat can be reattached and the screws tightened securely.
If the issue is not with the hinge, then it may require further troubleshooting and additional repairs. If so, it may be best to seek professional assistance.
What is a STA-TITE toilet seat?
The STA-TITE toilet seat is a secure and convenient type of seat that is designed to provide extra closure. It uses the STA-TITE Seat Fastening System, which features a continuous, one-piece hinge for a stronger, more secure fit that won’t loosen over time.
The system also eliminates the need for traditional plastic nuts and bolts that can be difficult to tighten and can become corroded or stripped. Instead, STA-TITE toilet seats are designed with a patented stabilizer that adjusts to fit all toilet bowl shapes and sizes.
This adds an extra layer of durability and stability as well as an additional layer of security that most other seats don’t have. Additionally, the STA-TITE Seat Fastening System is easy to install, requiring just a few simple steps that can be completed in minutes.
All you have to do is line up the seat with the hinges, push down and that’s it – the seat is secure and ready to use. It’s an ideal way to make sure that your seat lasts for years to come.
How do you replace a toilet seat on a close coupled toilet?
Replacing a toilet seat on a close coupled toilet is a relatively straightforward process that can be completed in just a few steps.
First, turn off the water supply to the toilet and flush the toilet to empty all of the water from the tank. Once all of the water has been emptied from the tank, unscrew and remove the plastic caps from the bolts on each side of the toilet.
At this point, use a flat-head screwdriver to carefully pry up the seat and remove it from the bowl.
Now, take the new seat and locate the mounting holes on the underside of the seat. Place the seat over the toilet bowl, lining up the holes with the bolts below. Place washers on the bolts and proceed to tighten them with the nuts provided.
Securely tighten the nuts until the seat is firmly in place.
Finally, turn the water supply back on and let the tank fill, then flush the toilet a few times to test that it is now correctly functioning with the new seat correctly installed.
Do all toilet seats fit all toilets?
No, all toilet seats do not fit all toilets. Toilet seats are specifically designed to fit certain toilet models, so it is important to measure your toilet before purchasing a new seat to make sure the seat will fit properly.
The common sizes for toilet seats are Round, Elongated and Oblong. Round seats are designed for toilets with a bowl which is about 16. 5 inches from the wall to the center of the mounting holes. Elongated seats can fit either round or elongated bowls and are 18.
5 inches from the wall to the center of the mounting holes. Oblong seats are between 17 to 18. 5 inches and are sometimes referred to as “tavern” seats. When purchasing a new toilet seat, it is important to know the size and model of the existing toilet in order to select the right size and model of the replacement toilet seat.
Should you put silicone around base of toilet?
Yes, you should put silicone around the base of your toilet. Silicone is a great sealant material that can help prevent water damage, which can lead to costly repairs. It creates a barrier around the bottom of the toilet bowl and helps keep the floor dry.
Installing silicone correctly helps keep your bathroom dry and protects your flooring from moisture. Furthermore, silicone is a durable material that will last for many years with proper care and maintenance.
To put silicone around the base of your toilet, make sure the area is sanded and clean, then apply the silicone with a caulking gun. Allow it to dry for the length of time recommended by the manufacturer.
Finally, test the seal to make sure it is secure.
What happens if you don’t caulk around toilet?
If you don’t caulk around your toilet, it can lead to water damage, mold, and warping of your flooring. Water can seep underneath the toilet, which can cause the floor to buckle from moisture if it’s a wood subfloor.
Additionally, it can lead to mold growth if left unaddressed. Caulking around the toilet is vital for a waterproof seal, which helps to keep water from getting underneath the toilet and doing serious damage to the subfloor or adhesive.
Not only can this cause significant damage to your flooring, it can also lead to an expensive repair.