Skip to Content

What equipment do I need to move a hot tub?

To move a hot tub, you will need the following equipment:

1. A Heavy-duty moving dolly with at least 3,000 lbs. carrying capacity. This will allow you to move the hot tub while also supporting its weight.

2. A heavy-duty tarp. This will protect the hot tub from any environmental elements or ground debris when being moved.

3. A set of strong, flat straps to secure the hot tub to the dolly. Make sure the straps are durable enough to withstand the weight of the hot tub and the bumps along the way.

4. A set of genuine hot tub lifters. If the hot tub is above ground, you will need to make sure it is secure during the moving process.

5. A tool set. You may need basic tools, such as a wrench and a screwdriver, to disconnect the hot tub from any electrical or water connections.

6. Protective gloves to protect your hands when handling the hot tub.

7. Optional tools to make the move easier, such as a lift or ramp to help move the hot tub in and out of the house.

By having all of the necessary equipment, you can ensure a successful move for your hot tub.

How do you move a hot tub by yourself?

Moving a hot tub by yourself is no small task. You’ll need a plan and a great deal of physical strength and help from at least one other person. Before attempting to move the hot tub, make sure you prepare the site where it will be placed, as it will require a flat and reinforced surface with adequate drainage.

To start, you’ll need to empty and thoroughly drain the hot tub of all water and turn off the power source. After draining, use a screwdriver to remove the screws that prop up the hot tub and then jimmy-bar the sides to loosen and lift the tub up.

Place supports underneath the tub and have your helperlift the hot tub onto the supports.

Using straps, secure the hot tub to a skid or a moving apparatus and then with at least one other person, maneuver it as precisely and carefully as possible to the desired location. Make sure to avoid sharp turns or any excessive bouncing or shaking, as this could break the hot tub.

Once at the desired location, slide the tub off the appliance and set it back in the same orientation as previous to prevent any further strain on the seaming.

After doing so, you’ll need to tighten the screws again that hold the tub up, refill it with water, and plug it back into a power source. Test all electrical components before using the hot tub and you’ll be ready to enjoy it from its new location.

How difficult is it to move a hot tub?

Moving a hot tub can be quite difficult, especially if it’s a large, in-ground model. First, you’ll need to drain the hot tub and disconnect the motorized parts, such as the heater and pumps. Then, you’ll need to secure the hot tub to a hydraulic lift or trailer and move it to its new location.

Depending on how far apart the two locations are, you may also need to transport the hot tub on a truck or trailer. Once you’ve moved the hot tub, you’ll need to refill it with water, reconnect the motorized components, and balance the chemicals.

This can all be extremely labor intensive and time consuming, so most people opt to hire a hot tub moving company to help them out.

Can you move a hot tub with an appliance dolly?

Yes, you can use an appliance dolly to move a hot tub. It’s important that you prepare the hot tub first by emptying it and removing all the features like jets, skimmers and lids. Make sure it’s on a flat surface so that it’s evenly balanced.

If you’re moving it outdoors, make sure to cover it in plastic or a tarp. Once your hot tub is covered and ready, place it on the appliance dolly with the middle of the hot tub lined up with the middle of the dolly.

Make sure the wheels are secure and won’t roll away. To move the hot tub, tip it slightly at an angle and roll it off the dolly. A hot tub is heavy and it’s best to have a few people to help you so that you don’t injure yourself.

If you can find a dolly with straps and ratchets, it can help immensely in moving the hot tub. Once you get it off the appliance dolly, you can deflate the air pillow (if you have one) and fully secure the lid.

Once it’s secure, you can attach it to the back of a truck to move it. It’s best to be extremely cautious when moving a hot tub and make sure that everything is secure and secure it along the way.

How heavy is an empty 6 person hot tub?

The exact weight of an empty 6 person hot tub depends on the size, materials, and other specific factors; however, as a general guide, a full 6 person hot tub typically weighs anywhere between 1500 and 3000 lbs when empty.

Any 6 person spa that has a large capacity and is made of more durable construction materials such as acrylic, stainless steel and synthetic fabric may exceed 3000 lbs. Additionally, any 6 person hot tub that has features like controls and other additional electronics, could weigh up to 3500 lbs or more.

Therefore, it is essential to always double-check the exact weight before attempting to move it.

How many people can lift a hot tub?

The exact number of people needed to lift a hot tub depends on the size and weight of the hot tub as well as the strength of the people performing the lift. Generally, most hot tubs range in size and weight, with the largest and heaviest hot tubs reaching 800-1000 pounds.

Consequently, moving a hot tub successfully typically requires 2-4 individuals to perform the lift.

For maximum safety, those participating in the lift should always be at least two people, as one person lifting a large and heavy hot tub can place them at risk of injury. Additionally, those lifting the hot tub should be in good physical condition, as lifting a large and heavy hot tub requires a significant amount of strength.

Finally, it is recommended to use appropriate lifting equipment and techniques when moving a hot tub.

What is a spa dolly trailer?

A spa dolly trailer is a specialized trailer used to transport hot tubs, spas, and other similar large items. The design of spa dolly trailers generally includes an open structure with tracks that allow for easy movement and maneuverability of the object being transported.

These trailers often have built-in storage areas for storing spa and hot tub-related items such as covers, pumps, filters, and chemicals. Additionally, some spa dolly trailers are equipped with a powered lift that can be used to easily move the item up and down the more steep areas during transport.

Spa dolly trailers provide an efficient and safe way to move large hot tubs. The trailers are designed with low-profile frames to reduce the overall weight of the trailer, making it easier to tow and maneuver.

The low-profile design also helps to provide more clearance when maneuvering in and out of tight areas.

What does a 5 person hot tub weigh?

A 5 person hot tub typically weighs around 800-1200 lbs, depending on the size and type of hot tub. The typical size for a 5 person hot tub is between 180-240 gallons and can be made from various materials such as vinyl, acrylic, steel, and fiberglass.

The size of the hot tub will also affect the weight substantially, a hot tub that is large and made of heavy materials can be much heavier than a smaller hot tub made of lighter materials. Additionally, the type of fill can affect the weight; a hot tub filled with water is considerably heavier than one that is filled with foam.

How much does a hot tub weigh to move?

The amount of weight a hot tub can add to a relocation job is substantial. On average, an average sized hot tub will weigh anywhere from 800-2500 lbs, depending on the size. Larger hot tubs can weigh as much as 5000 lbs.

To move a hot tub safely, it’s essential to have the proper equipment and knowledge of how to safely and securely move a hot tub. Most people opt to hire professional movers to move a hot tub due to its size and weight.

Professionals will have the right tools and know-how to move and secure the hot tub for the move. Additionally, having the proper equipment such as heavy-duty dollies and pallet jacks can reduce the chances of accidents or injuries and ensure the hot tub is moved properly and is secure during the move.

How easy is it to move a spa?

Moving a spa can be both an easy and a difficult task, depending on the size and weight of the spa. If the spa is small and light, then it is relatively easy to move it by yourself with the use of a few people.

However, if the spa is large, then it may be more difficult and require special equipment such as a crane or an electric winch. Additionally, if the spa needs to be moved to a different location, it is often recommended to have a professional spa mover handle it, as they have the correct lifting equipment and experience.

Regardless, it is important to consider local regulations and safety measures when moving a spa to ensure it is done correctly and safely.

How heavy is a 7×7 hot tub empty?

The exact weight of an empty 7×7 hot tub can vary depending on the materials used, so it is difficult to provide a specific answer. However, a good estimate is that the empty weight of a standard 7×7 hot tub is approximately 800-1000 lbs.

This weight can increase slightly or drastically depending on the type of materials used and the internal components (such as motor, jets, etc. ). Additionally, the weight can increase significantly when filled with water depending on the size of the water capacity (the larger the capacity, the more it will increase).

When moving a hot tub can you put it on its side?

Generally speaking, it is not recommended to move a hot tub while it is on its side. This is due to the fact that moving it in this manner could cause the internal components to become out of alignment, which could easily damage the unit.

Additionally, there is a possibility that the water could become displaced, which could lead to a costly repair job that could be avoided by just moving the hot tub on its bottom. If you must move it on its side, make sure the tub is properly secured and have someone help you move it.

Also, it’s important to empty the water from the tub first. Additionally, make sure that the hot tub is thoroughly drained afterwards to avoid any moisture from entering the electrical components.

Can a hot tub be shipped on its side?

Yes, a hot tub can be shipped on its side, but it is not the most ideal way to transport it. Hot tubs are usually wet, meaning they can be affected by gravity. When a hot tub is laid on its side during transit, the water can collect in certain areas which can cause damage to some of the inner parts.

It is also not ideal because the weight of the water on its side can cause the shell and frame to become misshaped, which can be difficult to correct upon arrival. Therefore, transportation companies who specialize in hot tubs will usually upright the hot tub and secure it in a flat position for transit.

Can spas be moved on their side?

In general, it is not advisable to move a spa on its side, as this can easily cause damage to the plumbing and other parts. If you need to move the spa, it is best to secure it to a dolly or pallet jack and move it upright.

It is also important to use the proper techniques to balance the weight and protect the spa shell during transport. If you are unsure of the proper handling techniques, your local spa dealer may be able to provide assistance or recommended movers.

What is the way to haul a hot tub?

When it comes to hauling a hot tub, the best strategy is to use a large, lifting device and the right team of professionals prepared to handle the job. First and foremost, the hot tub should be completely empty of water, and if possible, it should be partially drained to minimize the weight.

Determine the appropriate lifting device such as a crane, forklift, or a combination of both, and make sure the right team is present to safely operate the equipment. While operating the lifting device, make sure everyone is wearing the necessary protective gear and observe all safety protocols.

Once the hot tub is lifted, transportation to the new location should be handled by a large flatbed truck or trailer designed for hauling. Before loading the hot tub onto the truck, it’s also important to use straps and/or pallet jacks to securely keep the hot tub safe and avoid any unnecessary damage that could occur during the transport.

Although hauling a hot tub may seem like an intimidating task, following these tips can help ensure that the process goes smoothly and that the hot tub arrives safely at its destination.