Skip to Content

What works better than the Works toilet bowl cleaner?

The best product for cleaning a toilet bowl is a combination of preventive maintenance and routine cleaning. The key to maintaining a clean and sanitary toilet bowl is to remove bacteria, stains, and odors as soon as they appear.

A combination of scrubbing with an abrasive cleaner such as an all-purpose bathroom cleaner or a baking soda and vinegar mixture and regular use of a disinfectant toilet bowl cleaner can help keep the toilet bowl clean and smelling fresh.

For removing stubborn stains and odors, bleach-based cleaners or toilet bowl cleaners containing hydrogen peroxide or ammonium chloride are effective against germs and bacteria. Be sure to follow the manufacturer’s instructions when using these products.

It is also important to wear gloves and other protective clothing when using any cleaning chemicals.

For preventive maintenance, it is important to flush away waste frequently and check the toilet bowl for deposits such as urine, fecal matter, and other sources of odor. When flushed away, these sources can help prevent the need for stronger cleaning products.

Additionally, wiping the rim of the toilet with disinfecting wipes after each flush can help keep bacteria at bay and keep the toilet bowl clean. Finally, it is important to set regular cleaning intervals to make sure the toilet bowl is always in optimal condition.

What toilet bowl cleaner works as good as the works?

The Works Toilet Bowl Cleaner is a popular product for cleaning and eliminating hard water stains, rust, and mineral deposits. It also has a powerful disinfecting power that is great for killing germs and bacteria in the toilet.

If you are looking for a product that works as well as The Works Toilet Bowl Cleaner, then Lysol Power Toilet Bowl Cleaner is a great option. Lysol also offers a powerful disinfecting power while cleaning and deodorizing the toilet bowl.

It is formulated with hydrochloric acid and bleach to remove hard water stains and rust, and it is safe for septic systems. It also comes with a fresh scent that can help keep your bathroom smelling fresh longer.

Lastly, Kaboom Foam-Tastic Bathroom Cleaner is also another option for an effective toilet bowl cleaner. It comes in an easy-to-use foam that takes the work out of cleaning hard water stains and rust, and it leaves a pleasant scent behind as well.

Did they stop making the works toilet cleaner?

No, they haven’t stopped making the Works toilet cleaner. The Works has been producing its powerful toilet bowl cleaner since the 80s, and is still widely available today. The Works toilet bowl cleaner is a unique cleaner that comes in three different formulas: Original, Bleach, and Citrus.

Each formula is designed to eliminate soils and odors, leaving toilets clean and smelling fresh. It’s a powerful cleaner, yet safe for septic tanks, pipes, and fixtures. The Works toilet bowl cleaner is available in both liquid and gel form, so you can choose the right form for your needs.

You can find it in many supermarkets, drugstores, and home improvement stores across the country.

What do professional cleaners use to clean toilets?

Professional cleaners typically use a combination of cleaning supplies to clean toilets. This can include a toilet brush, soap, bleach, elbow grease and sometimes abrasive cleaners. Toilet brushes are essential for getting rid of tough stains and bacteria build up in both the bowl and the rim.

A good soap should be used to ensure rinsing and sudsing, as well as prevent mold or bacteria build up. Bleach is very helpful in areas where there is staining or mineral build up in the toilet bowl.

Finally, elbow grease and abrasive cleaners can be used to tackle tougher jobs like hard water deposits or lime scale.

How do you clean a badly stained toilet?

If you have a badly stained toilet, you will want to take steps to clean it properly. First, it is important to make sure that you wear gloves and protective clothing when tackling this task. Then, start by removing any visible dirt or debris from the outside of the toilet.

Use a scrub brush or sponge to scrub away any stubborn marks or stains. You may want to use a combination of baking soda and vinegar to make a paste to help loosen and remove tough stains. For tougher stains, you can try using bathroom cleaner containing bleach or an oxygenated toilet cleaner.

When using a cleaner of any kind, be sure to follow package directions carefully. Apply the cleaner directly to the stain and let it sit for at least five minutes. After it sits, use a scrub brush to scrub the affected area.

If the stain does not come out completely, you may need to repeat the process several times. Lastly, rinse the area thoroughly with water and dry it with a clean towel. In addition to cleaning your toilet, it is a good idea to always keep your bathroom clean and tidy, as it can help prevent future stains and buildup.

What do plumbers recommend to clean toilet tanks?

Plumbers typically recommend using a combination of vinegar and baking soda to clean the inside of toilet tanks. To get started, you should start by filling the tank halfway with warm water. Then add a cup of white vinegar and a ½ cup of baking soda to the tank.

Let the mixture sit in the tank for at least 5-10 minutes, then scrub the sides of the tank with a toilet brush. Finally, flush the tank a few times to rinse away any residue.

Other household cleaners, such as bleach, Windex or ammonia, can also be used to clean tough stains. When using these products, you should make sure to wear appropriate protective gear, such as gloves and goggles, to protect yourself from the fumes.

Additionally, avoid using any abrasive cleaners or pads that might scratch the surface of the toilet tank. For tougher stains or lime deposits, you may need to let the cleaning solution sit for a longer period of time.

What is the product to unblock a toilet?

If you need to unblock a toilet, the product you need depends on the type of blockage. In some cases, a plunger may be able to clear the blockage. Plungers come in various shapes, sizes and materials, and are relatively inexpensive.

Alternatively, a drain auger (also called a plumbing snake) may be needed to clear out any buildup or blockage that is further down the pipe. Augers come equipped with various heads and cable lengths, so you may need to find one that fits well for your pipes.

If the clog is due to a buildup of material, chemical drain cleaners may help. These products are usually in liquid form and contain caustic ingredients to break down the clog, however, it is important to use caution when dealing with these chemicals as they can cause burns and damage your pipes if used improperly.

Additionally, depending on the severity of the issue, you may need to call a professional plumber to inspect and address the issue.

Does vinegar damage toilet bowls?

No, vinegar does not damage toilet bowls. Vinegar is actually a great natural cleaner for toilets and can be used to remove lime scale and soap scum from the bowl. When cleaning with vinegar, start by pouring 1 to 2 cups of white vinegar into the bowl and letting it sit for at least half an hour.

After that, scrub the bowl with a toilet brush and flush. This will help to remove tough stains and leaves your bowl looking clean. If you want to get an extra-deep clean, you can try adding baking soda to the vinegar and then scrubbing the bowl.

As with any cleaner, it’s important to use in moderation and with care, so don’t saturate the bowl with vinegar – it could damage the material.

How do I keep my toilet bowl clean and smelling good?

The easiest way to keep your toilet bowl clean and smelling good is to create a regular cleaning routine. Start by scrubbing the outside of the toilet with a cleaning solution and a cloth or sponge. Then, clean the seat and lid with the same solution.

After that, scrub the bowl with a toilet bowl brush dipped in the same cleaning solution. If you see any stubborn stains, use a toilet-specific cleaning product like a pumice stone or a toilet cleaner with bleach.

Then, flush the toilet and apply a toilet deodorizer to keep the bowl smelling clean and fresh. Make sure to follow up your regular scrubbing with a full cleaning once a month. To do this, flush the toilet then sprinkle about a cup of baking soda around the bowl.

Follow that up with a toilet cleaner that contains bleach and let it sit for about half an hour before brushing and flushing the toilet again.

How do you clean a toilet bowl without scrubbing it?

Cleaning a toilet bowl without scrubbing it is a surprisingly easy task. Start by preparing a solution made from one part white vinegar and a few drops of liquid dishwashing detergent. After the solution is ready, pour it into the bowl and wait for 15-20 minutes before flushing.

This will allow the acidic vinegar to reach all hard-to-reach areas of the bowl and breakdown dirt, grime, and lime scale.

Once the vinegar solution has had time to react, flush the bowl completely. Afterwards, you can use an old toilet brush or microfiber towel with a little bit of liquid dishwashing detergent if needed to wipe down the walls of the bowl to remove any residue.

For toughest spots, use a borax powder or baking soda solution to scrub them away. This is an easy, effective, and inexpensive way to clean a toilet bowl without scrubbing.

Is WD 40 good for cleaning toilet bowls?

No, WD 40 is not a good choice for cleaning toilet bowls. While it may be useful for some general cleaning tasks, it is not intended for use in a toilet. It is not designed to disinfect or deodorize the bowl and can actually cause more harm than good.

For the best results, use a specialized product designed for bathroom cleaning. Products like stainless steel cleaner, bleach, or a multipurpose bathroom cleaner can help keep your toilet clean and free of smell.

Be sure to follow all label instructions and safety guidelines when using this type of product in your bathroom.

Does the Works toilet bowl cleaner have bleach in it?

No, the Works Toilet Bowl Cleaner does not contain any bleach. This powerful cleaner is made with natural citric acids that rapidly dissolve tough calcium and lime deposits, as well as rust and grime.

It also uses special cleansers to reach under the rim of the bowl to create a deep clean. The Works Toilet Bowl Cleaner is designed to provide a powerful, safe, and effective clean for your toilet without the use of harsh chemicals or compounds.

How do you get thick brown stains out of a toilet?

To remove thick brown stains from a toilet, you’ll need to use a few items from your pantry or cleaning cabinet.

First, mix together one cup of baking soda and half a cup of lemon juice. If you don’t have lemon juice available, you can use vinegar instead. The combination of the two ingredients will create a fizzy reaction and can help dissolve the stains.

Pour the mixture in and around the bowl. Let the solution sit in the bowl for at least 20 minutes to give it time to work. Then, use a toilet brush or scrubber to agitate the solution and help it penetrate the stains.

Rinse the bowl with hot water and then take a look at the toilet. If the stains are still visible, repeat the above steps, adding a few drops of dish soap to the mix. Let the solution sit for a minimum of 20 minutes before agitating and rinsing with hot water again.

If the stains are still visible, you may need to use a stronger cleaner. Instead of baking soda and lemon juice, you can use a combination of one part bleach and three part water. Before applying the mix, it’s important to check the toilet manufacturer’s instructions for any warnings about bleach.

Pour the mix in the bowl and let it sit for at least an hour before scrubbing and rinsing with hot water.

If the stains still remain and don’t appear to be fading, you may need to call a professional plumber to help resolve the issue.

What’s the limescale remover for toilets?

The best limescale remover for toilets would depend on the extent of the limescale buildup and the type of material that the toilet is made of. For light limescale deposits, typically a cleaner with an acid content such as vinegar, lemon juice, citric acid, or CLR can be useful.

To use the cleaner, fill a spray bottle with the cleaner, spray it over the affected areas, and let it sit for 10–15 minutes before scrubbing with a brush. After scrubbing, flush the toilet and let it air dry.

For heavier limescale deposits, a commercial limescale remover such as The Works or LDR is more effective and can be used in the same way. These commercial limescale removers should be used with caution, however, as they are acidic and can damage fixtures or surfaces if left on them too long or used too regularly.

Always read and follow the instructions and warnings on the product packaging to ensure safe use.

What is brown stuff around base of toilet?

The brown stuff around the base of a toilet is likely due to toilet bowl rings. These rings form when mineral deposits, typically from hard water, accumulate around the base of the toilet bowl. Additionally, these rings can be caused by a buildup of bacteria, mold, and mildew that are naturally occurring around the toilet bowl.

Toilet bowl rings are unsightly and can be difficult to clean, but are typically not hazardous. To remove the rings, use an acid-based toilet cleaner such as diluted vinegar or a commercial product to scrub away the deposits.

After cleaning, apply a protective coating such as wax or a gel-based product to help prevent bacteria and other deposits from collecting around the base of the toilet bowl in the future.