Lyons tubs are manufactured in the United States of America (USA). They are produced at the Lyons USA facility at their headquarter location in Monett, Missouri. All construction, manufacturing, and assembly processes take place on-site allowing Lyons to produce quality and long lasting products that far exceed expectations.
Their attention to detail and devotion to provide the best products is what made Lyons as the leading manufacturer of showers, tubs, and bath accessories in the USA. Their products are offered in a wide variety of colors and styles made to perfectly fit your individual needs.
The quality materials and innovating designs are what keep buyers returning to Lyons. They have been producing quality tubs since the 1940’s and their products are available in a large number of stores, outlets, and online retailers.
Who owns Lyons Industries?
Lyons Industries is a privately owned company with its headquarters in Bristol, UK. It has been in operation since 1823, when it was founded by Edward Lyons. It is currently owned by the Lyons family and managed by Matthew Lyons, the founder’s great-grandson.
The company employs approximately 1,500 people across the UK, and its main focus is on manufacturing home and kitchen products such as cookers, ovens, washing machines and other related products. It also produces high value electronics and components for the industrial, medical and aerospace industries.
The company is one of the leading manufacturers in its sector and has earned numerous awards, including two Queen’s Awards for Enterprise and the ‘Manufacturer of the Year’ award in 2012.
How do you install a Lyons tub?
Installing a Lyons tub requires preparation and knowledge of the installation process in addition to the right tools. Here is a basic guide to installing a Lyons tub:
1. Shut off the main water supply and drain the existing plumbing lines.
2. Measure the space in the bathroom to determine which size of Lyons tub will fit snugly.
3. Select the appropriate flange kit for the Lyons tub depending on the particular application.
4. Plumb the hot and cold water lines to the tub using the appropriate flange kit.
5. If a whirlpool jetted bathtub is desired, connect the pump to the water lines and check for leaks.
6. Place the tub in its intended position, securing it with suitable fastening materials and adhesives.
7. Install appropriate tiling or caulking around the Lyons tub for a finished look.
8. Reattach the existing plumbing and turn on the main water supply.
9. Test the tub to ensure that it is functioning properly and there are no leaks.
Following each of these steps will ensure that the Lyons tub is properly and safely installed. It is highly recommended to consult a professional and refer to the manufacturer’s instructions when installing any tub.
What is the base for a shower?
The base for a shower is what the floor of the shower rests on and supports the walls and rest of the shower structure. The most common base for a shower is a prefabricated plastic base, which typically consists of four walls and a floor.
This base rests on the floor of the bathroom and is sealed with a waterproof sealant. The walls of the base are usually fitted with barriers to help keep water from seeping out and onto the bathroom floor.
The base is often tilted slightly towards a drain to help keep the shower area dry.
Do I need mortar under shower pan?
Yes, you will need mortar underneath your shower pan. Mortar will act as a bonding agent between your shower pan and the base of your shower floor, creating a watertight seal. Properly installing the mortar under your shower pan is essential on any bathroom project, as it can help prevent future water damage and aid in the overall longevity of your shower.
The mortar should be installed before placing your shower pan in the desired location, and it should be applied in thin, even layers. It’s also important to thoroughly check for any air pockets or gaps between the mortar and shower pan before the mortar dries in order to ensure a proper waterproof seal.
Be sure to follow all manufacturer’s instructions when installing your shower pan and mortar to ensure a secure, watertight connection.
What do you put under a prefab shower base?
When installing a prefab shower base, there are several items that need to be placed underneath the base. The first item to consider is a waterproof underlayment material. This material should be placed directly on top of the subflooring.
The underlayment should cover the entire area where the prefab shower is being installed.
The next item to consider is a mortar base or mortar bed. This should be applied according to the manufacturer’s instructions. The mortar should be applied to the entire area that the prefab shower base is to be placed on and should be allowed to dry completely before the prefab shower base is put into place.
Once the mortar base has been applied, the prefab shower base should be carefully put into place. It is important to ensure that the base is level, without any shifting or access air gaps that could cause leaks.
It is also a good idea to use a sealant on all of the seams of the shower base before it is fully secured, as this can help to prevent water leakage.
Finally, it is important to use a drain assembly that matches the size and shape of the prefab shower base. The final step is to use appropriate waterproof grout around the edges of the shower base to ensure that no water is able to penetrate through the seams or get underneath the base.
Do you need a puddle flange under shower base?
Yes, you do need to install a puddle flange under a shower base. A puddle flange is a drainage fitting found in showers and baths to provide water-tight protection between the shower pan bottom and the floor.
Without a puddle flange, water can run from the shower pan onto the floor and cause major water damage to the flooring and the substructure of the house. A puddle flange creates a seal that keeps the water in the shower pan.
Installation is usually done by a professional plumber, but a few basic steps can be accomplished by an amateur handyman. To install a puddle flange, use a mixture of silicone caulk and level the flange, make sure the flange is set to the proper drainage angle, and connect the flange to the shower drain trap.
The final step is to seal the flange with access panels and connect the flange to your home’s plumbing system.
Do you screw a shower base to the studs?
Yes, a shower base should be secured to the wall studs. This is done using lag bolts, which should be placed at specific intervals and screwed into the studs. It’s important to check that the shower base has proper support and that the wall can bear the weight of the base.
Additionally, use a level to make sure that the base is even with the studs and not crooked. Once the base is secure, caulk around the edges of the base and shower walls where they meet to seal the shower and keep moisture out.
Make sure to follow all manufacturer instructions to properly secure a shower base to wall studs.
Does a bathtub need support underneath?
Yes, a bathtub absolutely needs support underneath it. This is because the weight of the water and the tub itself must be distributed equally across the floor and the walls, otherwise it runs the risk of damaging or warping the tub, the tile or even the wall.
Additionally, the weight of a filled bathtub can cause serious structural damage to the flooring if it is not adequately supported. To ensure your bathtub is properly supported, most bathrooms use a platform that is built with either wood or Synthetic Deck Boards.
This will help distribute the weight of the tub evenly and make sure that the flooring beneath it is properly supported. It’s also important to ensure that wherever you place your bathtub, the structure of the walls is strong enough to support the weight of a filled bathtub.
How do you install a bathtub step by step?
Installing a bathtub can be a tricky process that requires some experience or careful attention to detail. To properly install a bathtub, here are the steps you should follow:
1. Remove any existing fixtures. If you have an existing bathtub, you will need to remove the drain, faucets, and any other accessories from the wall. Make sure to disconnect the drains from the plumbing and shut off the water before proceeding.
2. Mark out where the new tub will be installed. Take the time to measure and mark out the space for the new tub so you can ensure everything is properly aligned.
3. Set the new bathtub in place. Raise the bathtub and place it in the space you marked out earlier. Make sure the tub is level and secure it in place using shims, if necessary.
4. Install the drain. Place the drain in the center of the tub and connect it to the plumbing line using a PVC pipe.
5. Install the faucets. Place the faucets in their designated holes and seal the edges with caulk.
6. Attach a shower curtain. If desired, attach a shower curtain and any other accessories, such as a grab bar, to the wall.
7. Seal the edges. Apply a generous amount of caulk around the edges of the tub to seal it and prevent water leakage.
8. Turn the water back on. Connect the water supply lines to the faucets, then turn the water supply back on. Make sure to check for any leaks before using the tub.
Can I install a bathtub myself?
Installing a bathtub is not a task you should take lightly. While it is possible to install a bathtub yourself, it is not a DIY project we would recommend as there is a high risk of damage to the tub, walls and fixtures, in addition to personal injury due to improper installation.
If you are determined to make this a DIY project, you should research what is required and instructions in detail. You will need tools such as a level, hacksaw, caulk gun and sawzall, as well as several materials such as a tub and shower surround, drain assembly kit, and a mixing valve.
It may be helpful to have a few friends with experience in bathroom remodels to assist in the task as well. Even with help, installation of a bathtub is a difficult task that could take several hours.
Depending on the plumbing needed to make the fixtures work, you may need to hire a professional plumber. If you are unsure about your own ability, it’s always best to hire a professional to ensure your project is done correctly and safely.
How do you install a tub surround over drywall?
Installing a tub surround over drywall is relatively easy. The first step is to prepare the walls. First, salvage any bottom strips that may have been left behind if previous tiles have been removed.
If there are no remnants, cut ¼-inch-thick strips of cement backer board the same width as the tile. Attach the strips with construction adhesive and 1-inch-long galvanized roofing nails about 8 inches apart.
Make sure you wear safety glasses when working with cement backer board to keep your eyes safe from shards.
The next step is to make sure the walls are properly waterproofed. All tub enclosures must meet local building codes which usually require that at least two layers of water-resistant plaster or cement board is installed.
Once the walls are prepared and waterproofed, you’re ready for the tile. Mark a level line about 6 inches above the tub edge for your top row of tiles. Lay down a bead of thinset in a line along the top edge of the base strip and start installing the tiles.
Depending on the type of tile you’ve chosen, you may need to space the tiles with tile spacers. Keep the tiles level during installation and use thinset to adhere them in place. Once you have the top row in place, place a mark vertically down the center of the wall and continue tiling downward.
When the tiles are installed, you will need to grout them.
Once the grout is dry, you can install the bottom row of tiles and grout it if necessary. Lastly, fit the surround of the tub over the tile, following the manufacturer’s instructions. Make sure you caulk between the tub and the tile, and then let the caulk dry before use.
Installing a tub surround over drywall may seem like a daunting task, but with the proper preparation and safety precautions, it is an easy and inexpensive project that can provide huge improvements to the look of your bathroom.
Where should a linear drain be placed in a shower?
A linear drain should be placed at the lowest point in the shower area. The optimal placement is typically in the center of the shower space, or just off-center in one corner. This helps ensure that the water circulates evenly and drains away quickly.
The linear drain should not be placed too close to the walls or corners, as this can cause water to pool in the area. It should also be placed a few inches higher than the floor of the shower, so that there is a slight slope that allows the water to flow smoothly.
To ensure proper installation, you may need to consult with a professional for instructions on how to properly place the drain.
How do you support the base of a bathtub?
To support the base of a bathtub, the first thing you need to do is make sure that the floor below the tub is strong enough to hold up the weight. This can be done by checking the joists and making sure they are in good condition and securely attached to the walls.
Second, if the bathtub is being installed on a concrete slab, you should use composite shims to level the tub. These shims should be placed around the perimeter of the tub and between the bathtub base and slab.
Finally, you should use plumbers caulk around the underside of the tub and the floor to create an airtight seal that helps to keep the tub in place. This caulk should also be used to create a seal between the drainpipe and the floor.
After all of these steps, the bathtub should be properly supported for years to come.
How are free standing tubs attached to floor?
Free standing tubs are usually mounted directly to the floor and supported on the four sides with legs. The bottom of the tub is typically reinforced with a base plate so that it does not sag outward due to weight and pressure from the water when it is filled.
The bottom of the legs of the free-standing tub is generally designed to distribute the weight evenly across the entire floor and help prevent buckling. The legs are typically adjustable, allowing the installer to level the tub and make necessary adjustments.
In most cases, the shower unit is also attached to the wall to provide additional support and stability. Fasteners such as bolts, screws, and anchors are then used to attach the tub to the floor, and the legs of the tub will be tightened to ensure that the entire unit is secure before the water is added.